Firmware developed by Shenzhen Hichip Vision Technology (V6 through V20), as used by many different vendors in millions of Internet of Things devices, suffers from a privilege escalation vulnerability that allows attackers on the local network to reset the device's administrator password. This affects products marketed under the following brand names: Accfly, Alptop, Anlink, Besdersec, BOAVISION, COOAU, CPVAN, Ctronics, D3D Security, Dericam, Elex System, Elite Security, ENSTER, ePGes, Escam, FLOUREON, GENBOLT, Hongjingtian (HJT), ICAMI, Iegeek, Jecurity, Jennov, KKMoon, LEFTEK, Loosafe, Luowice, Nesuniq, Nettoly, ProElite, QZT, Royallite, SDETER, SV3C, SY2L, Tenvis, ThinkValue, TOMLOV, TPTEK, WGCC, and ZILINK.

Xerox Phaser 6510 before 64.65.51 and 64.59.11 (Bridge), WorkCentre 6515 before 65.65.51 and 65.59.11 (Bridge), VersaLink B400 before 37.65.51 and 37.59.01 (Bridge), B405 before 38.65.51 and 38.59.01 (Bridge), B600/B610 before 32.65.51 and 32.59.01 (Bridge), B605/B615 before 33.65.51 and 33.59.01 (Bridge), B7025/30/35 before 58.65.51 and 58.59.11 (Bridge), C400 before 67.65.51 and 67.59.01 (Bridge), C405 before 68.65.51 and 68.59.01 (Bridge), C500/C600 before 61.65.51 and 61.59.01 (Bridge), C505/C605 before 62.65.51 and 62.59.01 (Bridge), C7000 before 56.65.51 and 56.59.01 (Bridge), C7020/25/30 before 57.65.51 and 57.59.01 (Bridge), C8000/C9000 before 70.65.51 and 70.59.01 (Bridge), C8000W before 72.65.51 allows remote attackers to execute arbitrary code through a buffer overflow in Web page parameter handling.

RIOT-OS 2021.01 contains a buffer overflow vulnerability in sys/net/gnrc/routing/rpl/gnrc_rpl_validation.c through the gnrc_rpl_validation_options() function.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the request parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the LPD service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) in the LPD service and potentially execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by multiple buffer overflow vulnerabilities in the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS), and potentially execute arbitrary code on the device.

In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In MM_DATA_IND of cn_NrSmMsgHdlrFromMM.cpp, there is a possible EoP due to memory corruption. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Content-Type HTTP Header of the web application that would allow an attacker to execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the URI paths of the web application that would allow an unauthenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the attributes parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device.

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the okhtmlfile and failhtmlfile parameters of several functionalities of the web application that would allow an unauthenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

An Buffer Overflow vulnerability leading to remote code execution was discovered in MEX01. Remote attackers can use this vulnerability by using the property that the target program copies parameter values to memory through the strcpy() function.

A security flaw has been discovered in TOTOLINK A720R 4.1.5cu.630_B20250509. This issue affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. Performing manipulation of the argument desc results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited.

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

Incorrect reading of system image resulting in buffer overflow when size of system image is increased in Snapdragon Auto, Snapdragon Mobile, Snapdragon Wearables in MDM9607, MSM8909W, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 439 / SD 429, SD 450, SD 625, SD 632, SDM439

Stack-based buffer overflow in LoadOFF in bulletphysics bullet3 before 3.26 on all platforms allows remote attackers to execute arbitrary code via a crafted OFF file with an overlong initial token processed by the VHACD test utility or invoked indirectly through PyBullet's vhacd function.

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A buffer overflow vulnerability in the URL parser of the zhttpd web server in Zyxel VMG8825-T50K firmware versions prior to V5.50(ABOM.5)C0 could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and potentially execute arbitrary code by sending a specially crafted HTTP request.

Possible buffer overflow issue due to lack of length check when parsing the extended cap IE header length in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ8074, MDM9206, MDM9607, MDM9640, MDM9650, MSM8996AU, QCA6174A, QCA6574, QCA6574AU, QCA6584, QCA8081, QCA9379, QCS404, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM439, SDM630, SDM660, SDX20, SDX24, SXR1130

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

While playing the clip which is nonstandard buffer overflow can occur while parsing in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9206, MDM9607, MSM8909W, MSM8996AU, QCA6574AU, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 600, SD 615/16/SD 415, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM630, SDM660, SDX20

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

Memory safety bugs present in Firefox ESR 140.9.0, Thunderbird ESR 140.9.0, Firefox 149.0.1 and Thunderbird 149.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 149.0.2, Firefox ESR 140.9.1, Thunderbird 149.0.2, and Thunderbird 140.9.1.

webfsd 1.21 is vulnerable to a Buffer Overflow via a crafted request. This is due to the filename variable

The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c.

On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.2.1, 14.1.x before 14.1.4, 13.1.x before 13.1.3.6, 12.1.x before 12.1.5.3, and 11.6.x before 11.6.5.3, a malicious HTTP response to an Advanced WAF/BIG-IP ASM virtual server with Login Page configured in its policy may trigger a buffer overflow, resulting in a DoS attack. In certain situations, it may allow remote code execution (RCE), leading to complete system compromise. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

Buffer overflow can occur in WLAN firmware while parsing beacon/probe_response frames during roaming in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in APQ8096, APQ8096AU, IPQ6018, IPQ8074, MDM9607, MDM9640, MDM9650, MSM8996AU, Nicobar, QCA6174A, QCA6574, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCS404, QCS605, Rennell, SA6155P, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Rockwell Automation MicroLogix 1400 Version 21.6 and below may allow a remote unauthenticated attacker to send a specially crafted Modbus packet allowing the attacker to retrieve or modify random values in the register. If successfully exploited, this may lead to a buffer overflow resulting in a denial-of-service condition. The FAULT LED will flash RED and communications may be lost. Recovery from denial-of-service condition requires the fault to be cleared by the user.

Buffer overflow in Internet Mail Connector (IMC) for Microsoft Exchange Server 5.5 allows remote attackers to execute arbitrary code via an EHLO request from a system with a long name as obtained through a reverse DNS lookup, which triggers the overflow in IMC's hello response.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

A LoadLibraryEX vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to load an attacker-controlled DLL into a key executable, leading to execution of attacker-supplied code under the context of SYSTEM on affected installations.

Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 contains a buffer overflow vulnerability in the setUrlFilterRules interface of /lib/cste_modules/firewall.so. The vulnerability occurs because the `url` parameter is not properly validated for length, allowing remote attackers to trigger a buffer overflow, potentially leading to arbitrary code execution or denial of service.

A security flaw has been discovered in Totolink N300RH 3.2.4-B20220812. Affected by this vulnerability is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. Performing a manipulation of the argument Password results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A Buffer overflow vulnerability in function fromAdvSetMacMtuWan of bin httpd in Tenda AC10V4.0 V16.03.10.20 allows remote attackers to cause denial of service and possibly code execution by sending a post request with a crafted payload (field `serviceName`) to /goform/AdvSetMacMtuWan.

A buffer overflow vulnerability exists in TOTOLINK A950RG V4.1.2cu.5204_B20210112. The issue resides in the setRadvdCfg interface of the /lib/cste_modules/ipv6.so module. The function fails to properly validate the length of the user-controlled radvdinterfacename parameter, allowing remote attackers to trigger a stack buffer overflow.

A stack-based buffer overflow vulnerability exists in the CMA check_udp_crc function of Garrett Metal Detectors’ iC Module CMA Version 5.0. A specially-crafted packet can lead to a stack-based buffer overflow during a call to strcpy. An attacker can send a malicious packet to trigger this vulnerability.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When copying the contents of the first fragment (offset=0) into the reassembly buffer, no size check is performed. It is possible to force the creation of a small reassembly buffer by first sending a shorter fragment (also with offset=0). Overflowing the reassembly buffer corrupts the state of other packet buffers which an attacker might be able to used to achieve further memory corruption (potentially resulting in remote code execution). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be included and the attacker must be able to send arbitrary IPv6 packets to the victim. Version 2025.10 fixes the issue.

Meltytech Shotcut 25.10.31 is vulnerable to Buffer Overflow. A memory access violation occurs when processing MLT project files with manipulated width and height parameters. By setting these values to extremely large numbers, the application attempts to allocate excessive memory during image processing, triggering a buffer overflow in the mlt_image_fill_white function.

Multiple buffer overflows in the (1) png_set_PLTE and (2) png_get_PLTE functions in libpng before 1.0.64, 1.1.x and 1.2.x before 1.2.54, 1.3.x and 1.4.x before 1.4.17, 1.5.x before 1.5.24, and 1.6.x before 1.6.19 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a small bit-depth value in an IHDR (aka image header) chunk in a PNG image.

Buffer overflow in the lldp_decode function in daemon/protocols/lldp.c in lldpd before 0.8.0 allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via vectors involving large management addresses and TLV boundaries.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. A buffer overflow vulnerability exists in Contiki-NG versions prior to 4.6. After establishing a TCP socket using the tcp-socket library, it is possible for the remote end to send a packet with a data offset that is unvalidated. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. In the default case of DecodeTreeBlock a label is created via CurPath::AddLabel in order to track the label for later reference. An attacker can provide a malicious file to trigger this vulnerability.

A buffer overflow vulnerability in SMA100 sonicfiles RAC_COPY_TO (RacNumber 36) method allows a remote unauthenticated attacker to potentially execute code as the 'nobody' user in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances.

A flaw was found in the ZeroMQ server in versions before 4.3.3. This flaw allows a malicious client to cause a stack buffer overflow on the server by sending crafted topic subscription requests and then unsubscribing. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.