IBM Security Access Manager for Web 7.0 before IF2 and 8.0 before 8.0.1.4 IF3 and Security Access Manager 9.0 before 9.0.1.0 IF5 allow remote authenticated users to execute arbitrary commands by leveraging LMI admin access.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

jc21 NGINX Proxy Manager through 2.9.19 allows OS command injection. When creating an access list, the backend builds an htpasswd file with crafted username and/or password input that is concatenated without any validation, and is directly passed to the exec command, potentially allowing an authenticated attacker to execute arbitrary commands on the system. NOTE: this is not part of any NGINX software shipped by F5.

NEC Aterm devices (Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier) allow authenticated attackers to execute arbitrary OS commands by sending a specially crafted request to a specific URL.

IBM DataStage on Cloud Pak for Data 5.1.2 through 5.3.0 could allow an authenticated user to execute arbitrary commands with normal user privileges on the system due to improper validation of user supplied input through the wrapped command component.

IBM Aspera Orchestrator 4.0.0 through 4.1.0 could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

User provided input is not sanitized in the “Settings > Access Control” configuration interface allowing for arbitrary code execution.

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

A security flaw has been discovered in Wavlink NU516U1 M16U1_V240425. This vulnerability affects the function wzdap of the file /cgi-bin/adm.cgi. Performing a manipulation of the argument EncrypType/wl_Pass is directly passed by the attacker/so we can control the EncrypType/wl_Pass results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

User provided input is not sanitized on the AXIS License Plate Verifier specific “api.cgi” allowing for arbitrary code execution.

Microhard Systems IPn4G 1.1.0 contains a service vulnerability that allows authenticated users to enable a restricted SSH shell with a default 'msshc' user. Attackers can exploit a custom 'ping' command in the NcFTP environment to escape the restricted shell and execute commands with root privileges.

A remote execution of arbitrary commands vulnerability was discovered in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): Aruba AOS-CX firmware: 10.04.xxxx - versions prior to 10.04.3070, 10.05.xxxx - versions prior to 10.05.0070, 10.06.xxxx - versions prior to 10.06.0110, 10.07.xxxx - versions prior to 10.07.0001. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

Chamilo LMS is a learning management system. Prior to 1.11.38 and 2.0.0-RC.3, Chamilo LMS contains an OS Command Injection vulnerability in the file move function. The move() function in fileManage.lib.php passes user-controlled path values directly into exec() shell commands without using escapeshellarg(). When a user moves a document via document.php, the move_to POST parameter — which only passes through Security::remove_XSS() (an HTML-only filter) — is concatenated directly into shell commands such as exec("mv $source $target"). By default, Chamilo allows all authenticated users to create courses (allow_users_to_create_courses = true). Any user who is a teacher in a course (including self-created courses) can move documents, making this vulnerability exploitable by any authenticated user. The attacker must first place a directory with shell metacharacters in its name on the filesystem (achievable via Course Backup Import), then move a document into that directory to trigger arbitrary command execution as the web server user (www-data). This vulnerability is fixed in 1.11.38 and 2.0.0-RC.3.

An OS command injection vulnerability exists in the vtysh_ubus _get_fw_logs functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

Nagios XI versions prior to 5.4.13 contain a remote code execution vulnerability in the Component Download page. The download/import handler used unsafe command construction with attacker-controlled input and lacked sufficient validation and output encoding, allowing an authenticated user to inject commands or otherwise execute arbitrary code with the privileges of the application service.

Ruckus Wireless H500 web management interface authenticated command injection

TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request.

A vulnerability was identified in Wavlink NU516U1 M16U1_V240425. This affects the function wifi_region of the file /cgi-bin/adm.cgi. Such manipulation of the argument skiplist1/skiplist2 leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

An exploitable authenticated command-injection vulnerability exists in the web server functionality of Moxa NPort W2x50A products with firmware before 2.2 Build_18082311. A specially crafted HTTP POST request to /goform/net_WebPingGetValue can result in running OS commands as the root user. This is similar to CVE-2017-12120.

www/soap/application/MCSoap/Logs.php in MailCleaner Community Edition 2018.08 allows remote attackers to execute arbitrary OS commands.

Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acos_service that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter.

IBM Aspera Orchestrator 4.0.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 260116.

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. In versions 8.2.6.4 and prior, POST /config/versions/<service>/<server_ip>/<configver>/save interpolates the URL-path configver parameter directly into a config-version path that ends up at os.system(f"dos2unix -q {cfg}"). configver is not run through EscapedString (Pydantic doesn't validate path segments declared as str) and the surrounding .. block is the broken tuple-membership patch from GHSA-vapt-004. An authenticated user with role <= 3 ("user") therefore reaches a bin/sh -c command-injection sink. At time of publication, there are no publicly available patches.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. goform/formSysCmd allows remote authenticated users to execute arbitrary OS commands via the sysCmd POST parameter.

Cacti versions prior to 0.8.6-d contain a remote command execution vulnerability in the graph_view.php script. An authenticated user can inject arbitrary shell commands via the graph_start GET parameter, which is improperly handled during graph rendering. This flaw allows attackers to execute commands on the underlying operating system with the privileges of the web server process, potentially compromising system integrity.

An issue was discovered on D-Link DSL-3782 devices with firmware 1.01. An OS command injection vulnerability in Acl.asp allows a remote authenticated attacker to execute arbitrary OS commands via the ScrIPaddrEndTXT parameter.

A sandbox escape issue was discovered in VyOS 1.1.8. It provides a restricted management shell for operator users to administer the device. By issuing various shell special characters with certain commands, an authenticated operator user can break out of the management shell and gain access to the underlying Linux shell. The user can then run arbitrary operating system commands with the privileges afforded by their account.

A vulnerability was found in samanhappy MCPHub up to 0.9.10. Affected by this issue is some unknown functionality of the file src/controllers/serverController.ts. The manipulation of the argument command/args results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda HG3 2.0. The impacted element is an unknown function of the file /boaform/formCountrystr. The manipulation of the argument countrystr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

The Port Forwarding functionality on DASAN H660GW devices allows remote attackers to execute arbitrary code via shell metacharacters in the cgi-bin/adv_nat_virsvr.asp Addr parameter (aka the Local IP Address field).

Maxprint Maxlink 1200G v3.4.11E has an OS command injection vulnerability in the "Diagnostic tool" functionality of the device.

A weakness has been identified in Wavlink NU516U1 240425. This issue affects the function wzdapMesh of the file /cgi-bin/adm.cgi. This manipulation causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.

Cerio DT-300N 1.1.6 through 1.1.12 devices allow OS command injection because of improper input validation of the web-interface PING feature's use of Save.cgi to execute a ping command, as exploited in the wild in October 2018.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow remote attackers to execute arbitrary OS commands via shell metacharacters in the usrName parameter of a CGIProxy.fcgi addAccount action.

A security vulnerability has been detected in Wavlink NU516U1 240425. Impacted is the function advance of the file /cgi-bin/wireless.cgi. Such manipulation of the argument wlan_conf/Channel/skiplist/ieee_80211h leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

Command injection vulnerability in the operating system in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2 through the 'GetDNS()', 'CheckPing()' and 'TraceRoute()' functions.

LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the default password of admin for the admin account may be used in some cases.

A command injection vulnerability in PWS in Imperva SecureSphere 13.0.0.10 and 13.1.0.10 Gateway allows an attacker with authenticated access to execute arbitrary OS commands on a vulnerable installation.

A flaw has been found in Wavlink NU516U1 240425. The impacted element is the function sys_login1 of the file /cgi-bin/login.cgi. Executing a manipulation of the argument ipaddr can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.

Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Versions of @paperclipai/server prior to 2026.416.0 contain a privilege escalation vulnerability that allows an attacker with an Agent API key to execute arbitrary OS commands on the Paperclip server host. An attacker with an agent credential can escalate privileges from the agent runtime to the Paperclip server host. The vulnerability occurs because agents are allowed to update their own adapterConfig via the /agents/:id API endpoint. The configuration field adapterConfig.workspaceStrategy.provisionCommand is later executed by the server runtime. As a result, an attacker controlling an agent credential can inject arbitrary shell commands which are executed by the Paperclip server during workspace provisioning. This breaks the intended trust boundary between agent runtime configuration and server host execution, allowing a compromised or malicious agent to escalate privileges and run commands on the host system. This vulnerability allows remote code execution on the server host. @paperclipai/server version 2026.416.0 fixes the issue.