Phoenix Contact FL IL 24 BK-PAC allows remote attackers to cause a denial of service (hang) via (1) unspecified manipulations as demonstrated by a Nessus scan or (2) malformed input to TCP port 502.

An unauthenticated remote attacker can cause a Denial of Service by turning off the output of the UPS via Modbus command.

In Phoenix Contact FL SWITCH SMCS series products in multiple versions if an attacker sends a hand-crafted TCP-Packet with the Urgent-Flag set and the Urgent-Pointer set to 0, the network stack will crash. The device needs to be rebooted afterwards.

In Phoenix Contact FL SWITCH SMCS series products in multiple versions fragmented TCP-Packets may cause a Denial of Service of Web-, SNMP- and ICMP-Echo services. The switching functionality of the device is not affected.

ABB, Phoenix Contact, Schneider Electric, Siemens, WAGO - Programmable Logic Controllers, multiple versions. Researchers have found some controllers are susceptible to a denial-of-service attack due to a flood of network packets.

An unauthenticated remote attacker can DoS the control agent due to a out-of-bounds read which may prevent or disrupt the charging functionality. 

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 is vulnerable to a denial-of-service attack by making more than 120 connections.

An unauthenticated remote attacker can cause a Denial of Service by sending a large number of requests to the http service on port 80.

A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue.

Uncontrolled Resource Consumption can be exploited to cause the Phoenix Contact HMIs BTP 2043W, BTP 2070W and BTP 2102W in all versions to become unresponsive and not accurately update the display content (Denial of Service).

Multiple Phoenix Contact PLCnext control devices in versions prior to 2021.0.5 LTS are prone to a DoS attack through special crafted JSON requests.

In Phoenix Contact FL MGUARD 1102 and 1105 in Versions 1.4.0, 1.4.1 and 1.5.0 the remote logging functionality is impaired by the lack of memory release for data structures from syslog-ng when remote logging is active

An issue was discovered on PHOENIX CONTACT AXL F BK PN <=1.0.4, AXL F BK ETH <= 1.12, and AXL F BK ETH XC <= 1.11 devices and Bosch Rexroth S20-ETH-BK and Rexroth S20-PN-BK+ (the S20-PN-BK+/S20-ETH-BK fieldbus couplers sold by Bosch Rexroth contain technology from Phoenix Contact). Incorrect handling of a request with non-standard symbols allows remote attackers to initiate a complete lock up of the bus coupler. Authentication of the request is not required.

Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: 2D). Supported versions that are affected are Java SE: 6u151, 7u141 and 8u131; Java SE Embedded: 8u131; JRockit: R28.3.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Java SE Embedded, JRockit. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

An unauthenticated remote attacker can DoS a control agent due to access of a uninitialized pointer which may prevent or disrupt the charging functionality.

Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Serialization). Supported versions that are affected are Java SE: 6u151, 7u141 and 8u131; Java SE Embedded: 8u131; JRockit: R28.3.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Java SE Embedded, JRockit. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

Phoenix Contact Classic Line Controllers ILC1x0 and ILC1x1 in all versions/variants are affected by a Denial-of-Service vulnerability. The communication protocols and device access do not feature authentication measures. Remote attackers can use specially crafted IP packets to cause a denial of service on the PLC's network communication module. A successful attack stops all network communication. To restore the network connectivity the device needs to be restarted. The automation task is not affected.

Tanium addressed a denial of service vulnerability in Tanium Server.

Node.js before 10.24.0, 12.21.0, 14.16.0, and 15.10.0 is vulnerable to a denial of service attack when too many connection attempts with an 'unknownProtocol' are established. This leads to a leak of file descriptors. If a file descriptor limit is configured on the system, then the server is unable to accept new connections and prevent the process also from opening, e.g. a file. If no file descriptor limit is configured, then this lead to an excessive memory usage and cause the system to run out of memory.

Memory leak in the gk_circuit_info_do_in_acf function in the H.323 implementation in Cisco IOS before 15.0(1)XA allows remote attackers to cause a denial of service (memory consumption) via a large number of calls over a long duration, as demonstrated by InterZone Clear Token (IZCT) test traffic, aka Bug ID CSCsz72535.

There is a memory leak in util/parser.c in libming 0.4.8, which will lead to a denial of service via parseSWF_DEFINEBUTTON2, parseSWF_DEFINEFONT, parseSWF_DEFINEFONTINFO, parseSWF_DEFINELOSSLESS, parseSWF_DEFINESPRITE, parseSWF_DEFINETEXT, parseSWF_DOACTION, parseSWF_FILLSTYLEARRAY, parseSWF_FRAMELABEL, parseSWF_LINESTYLEARRAY, parseSWF_PLACEOBJECT2, or parseSWF_SHAPEWITHSTYLE.

An issue was discovered in cloudwu/cstring through 2016-11-09. There is a memory leak vulnerability that could lead to a program crash.

sav_parse_machine_integer_info_record in spss/readstat_sav_read.c in libreadstat.a in ReadStat 0.1.1 has a memory leak related to an iconv_open call.

A flaw was found in the way civetweb frontend was handling requests for ceph RGW server with SSL enabled. An unauthenticated attacker could create multiple connections to ceph RADOS gateway to exhaust file descriptors for ceph-radosgw service resulting in a remote denial of service.

Any git operation is passed through Jetty and a session is created. No expiry is set for the session and Jetty does not automatically dispose of the session. Over multiple git actions, this can lead to a heap memory exhaustion for Gerrit servers. We recommend upgrading Gerrit to any of the versions listed above.

Windows NT 4.0 does not properly shut down invalid named pipe RPC connections, which allows remote attackers to cause a denial of service (resource exhaustion) via a series of connections containing malformed data, aka the "Named Pipes Over RPC" vulnerability.

xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc->oldNs.

Foxit Reader before 9.7 allows an Access Violation and crash if insufficient memory exists.

hyperstart 1.0.0 in HyperHQ Hyper has memory leaks in the container_setup_modules and hyper_rescan_scsi functions in container.c, related to runV 1.0.0 for Docker.

Netty is an asynchronous, event-driven network application framework. From 4.2.0.Final to 4.2.13.Final , Netty's epoll transport fails to detect and close TCP connections that receive a RST after being half-closed, leading to stale channels that are never cleaned up and, in some code paths, a 100% CPU busy-loop in the event loop thread. This vulnerability is fixed in 4.2.13.Final.

Dave Gamble cJSON version 1.7.6 and earlier contains a CWE-772 vulnerability in cJSON library that can result in Denial of Service (DoS). This attack appear to be exploitable via If the attacker can force the data to be printed and the system is in low memory it can force a leak of memory. This vulnerability appears to have been fixed in 1.7.7.

In Eclipse Mosquitto 1.4.15 and earlier, a Memory Leak vulnerability was found within the Mosquitto Broker. Unauthenticated clients can send crafted CONNECT packets which could cause a denial of service in the Mosquitto Broker.

In TigerVNC 1.7.1 (SSecurityVeNCrypt.cxx SSecurityVeNCrypt::SSecurityVeNCrypt), an unauthenticated client can cause a small memory leak in the server.

When the BIG-IP Configuration utility is configured to use Lightweight Directory Access Protocol (LDAP) authentication, undisclosed traffic can cause the httpd process to exhaust the available file descriptors.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

AC6005 with software V200R006C10, AC6605 with software V200R006C10 have a DoS Vulnerability. An attacker can send malformed packets to the device, which causes the device memory leaks, leading to DoS attacks.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.x) (Exynos7420 or Exynox8890 chipsets) software. The Camera application can leak uninitialized memory via ion. The Samsung ID is SVE-2016-6989 (April 2017).

In Bftpd before 4.7, there is a memory leak in the file rename function.

Huawei AR120-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR1200 V200R006C10, V200R006C13, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR1200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR150 V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR150-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR160 V200R006C10, V200R006C12, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR200 V200R006C10, V200R007C00, V200R007C01, V200R008C20, V200R008C30, AR200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR2200 V200R006C10, V200R006C13, V200R006C16PWE, V200R007C00, V200R007C01, V200R007C02, V200R008C20, V200R008C30, AR2200-S V200R006C10, V200R007C00, V200R008C20, V200R008C30, AR3200 V200R006C10, V200R006C11, V200R007C00, V200R007C01, V200R007C02, V200R008C00, V200R008C10, V200R008C20, V200R008C30, AR510 V200R006C10, V200R006C12, V200R006C13, V200R006C15, V200R006C16, V200R006C17, V200R007C00, V200R008C20, V200R008C30, DP300 V500R002C00, IPS Module V100R001C10SPC200, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, MAX PRESENCE V100R001C00, NGFW Module V100R001C10SPC200, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R002C00, V500R002C10, NIP6300 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6600 V500R001C00, V500R001C20, V500R001C30, V500R001C50, NIP6800 V500R001C50, NetEngine16EX V200R006C10, V200R007C00, V200R008C20, V200R008C30, RP200 V500R002C00SPC200, V600R006C00, RSE6500 V500R002C00, SMC2.0 V100R003C10, V100R005C00, V500R002C00, V500R002C00T, V600R006C00, V600R006C00T, SRG1300 V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG2300 V200R006C10, V200R007C00, V200R007C02, V200R008C20, V200R008C30, SRG3300 V200R006C10, V200R007C00, V200R008C20, V200R008C30, SVN5600 V200R003C00, V200R003C10, SVN5800 V200R003C00, V200R003C10, SVN5800-C V200R003C00, V200R003C10, Secospace USG6300 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, Secospace USG6500 V100R001C10, V100R001C20, V100R001C30, V500R001C00, V500R001C20, V500R001C30, V500R001C50, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00, TP3106 V100R002C00, TP3206 V100R002C00, USG9500 V500R001C00, V500R001C20, V500R001C30, V500R001C50, USG9520 V300R001C01, V300R001C20, USG9560 V300R001C01, V300R001C20, USG9580 V300R001C01, V300R001C20, ViewPoint 9030 V100R011C02, V100R011C03, have a memory leak vulnerability in H323 protocol. The vulnerability is due to insufficient verification of the packets. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted packets. A successful exploit could cause a memory leak and eventual denial of service (DoS) condition on an affected device.

ImageMagick version 7.0.7-2 contains a memory leak in ReadYUVImage in coders/yuv.c.

There are lots of memory leaks in JasPer 2.0.12, triggered in the function jas_strdup() in base/jas_string.c, that will lead to a remote denial of service attack.

An FR-GV-203 issue in FreeRADIUS 2.x before 2.2.10 allows "DHCP - Memory leak in decode_tlv()" and a denial of service.

aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. In versions starting with 3.10.6 and prior to 3.10.11, a memory leak can occur when a request produces a MatchInfoError. This was caused by adding an entry to a cache on each request, due to the building of each MatchInfoError producing a unique cache entry. An attacker may be able to exhaust the memory resources of a server by sending a substantial number (100,000s to millions) of such requests. Those who use any middlewares with aiohttp.web should upgrade to version 3.10.11 to receive a patch.

IBM Rational Build Forge 7.0.2 allows remote attackers to cause a denial of service (CPU consumption) via a port scan, which spawns multiple bfagent server processes that attempt to read data from closed sockets.

Memory leak on Moxa Secure Router EDR-G903 devices before 3.4.12 allows remote attackers to cause a denial of service (memory consumption) by executing the ping function.

Memory leak in the CRYPTO_ASSOC function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (memory consumption).

Waitress is a Web Server Gateway Interface server for Python 2 and 3. When a remote client closes the connection before waitress has had the opportunity to call getpeername() waitress won't correctly clean up the connection leading to the main thread attempting to write to a socket that no longer exists, but not removing it from the list of sockets to attempt to process. This leads to a busy-loop calling the write function. A remote attacker could run waitress out of available sockets with very little resources required. Waitress 3.0.1 contains fixes that remove the race condition.

An issue was discovered in Samsung TizenRT through 3.0_GBM (and 3.1_PRE). createDB in security/provisioning/src/provisioningdatabasemanager.c has a missing sqlite3_close after sqlite3_open_v2, leading to a denial of service.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric. This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable. Note: This vulnerability requires a manual intervention to power-cycle the device to recover.

Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service.