A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

IBM Common Licensing 9.0 stores user credentials in plain clear text which can be read by a local user.

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

If a user saved passwords before Firefox 58 and then later set a master password, an unencrypted copy of these passwords is still accessible. This is because the older stored password file was not deleted when the data was copied to a new format starting in Firefox 58. The new master password is added only on the new file. This could allow the exposure of stored password data outside of user expectations. This vulnerability affects Firefox < 62, Firefox ESR < 60.2.1, and Thunderbird < 60.2.1.

Insufficiently protected credentials for Intel(R) AMT and Intel(R) Standard Manageability may allow a privileged user to potentially enable information disclosure via local access.

ovirt-engine up to version 4.2.3 is vulnerable to an unfiltered password when choosing manual db provisioning. When engine-setup was run and one chooses to provision the database manually or connect to a remote database, the password input was logged in cleartext during the verification step. Sharing the provisioning log might inadvertently leak database passwords.

Previous releases of the Puppet device_manager module creates configuration files containing credentials that are world readable. This issue has been resolved as of device_manager 2.7.0.

In JetBrains IntelliJ IDEA before 2021.3.3 it was possible to get passwords from protected fields

Plaintext Storage of Passwords in the administrative console in Dialogic PowerMedia XMS before 3.5 SU2 allows local users to access the web application's user passwords in cleartext by reading /var/www/xms/xmsdb/default.db.

Dell EMC Secure Remote Services, versions prior to 3.32.00.08, contains a Plaintext Password Storage vulnerability. Database credentials are stored in plaintext in a configuration file. An authenticated malicious user with access to the configuration file may obtain the exposed password to gain access to the application database.

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

Jenkins project Jenkins AWS CodePipeline Plugin version 0.36 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSCodePipelineSCM.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 0.37 and later.

An insufficiently protected credentials vulnerability exists in Jenkins Crowd 2 Integration Plugin 2.0.0 and earlier in CrowdSecurityRealm.java, CrowdConfigurationService.java that allows attackers with local file system access to obtain the credentials used to connect to Crowd 2.

An insufficiently protected credentials vulnerability exists in Jenkins SonarQube Scanner Plugin 2.8 and earlier in SonarInstallation.java that allows attackers with local file system access to obtain the credentials used to connect to SonarQube.

HCL Launch stores user credentials in plain clear text which can be read by a local user.

An insufficiently protected credentials vulnerability exists in Jenkins Artifactory Plugin 2.16.1 and earlier in ArtifactoryBuilder.java, CredentialsConfig.java that allows attackers with local file system access to obtain old credentials configured for the plugin before it integrated with Credentials Plugin.

Jenkins project Jenkins AWS CodeDeploy Plugin version 1.19 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSCodeDeployPublisher.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 1.20 and later.

A plaintext storage of a password vulnerability exists in Jenkins Coverity Plugin 1.10.0 and earlier in CIMInstance.java that allows an attacker with local file system access or control of a Jenkins administrator's web browser (e.g. malicious extension) to retrieve the configured keystore and private key passwords.

Jenkins project Jenkins AWS CodeBuild Plugin version 0.26 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSClientFactory.java, CodeBuilder.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 0.27 and later.

Dell EMC Repository Manager version 3.4.0 contains a plain-text password storage vulnerability. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application's database with privileges of the compromised account.

SangforCSClient.exe in Sangfor VDI Client 5.4.2.1006 allows attackers, when they are able to read process memory, to discover the contents of the Username and Password fields.

A vulnerability in the web portal authentication process of Cisco Prime Collaboration Provisioning could allow an unauthenticated, local attacker to view sensitive data. The vulnerability is due to improper logging of authentication data. An attacker could exploit this vulnerability by monitoring a specific World-Readable file for this authentication data (Cleartext Passwords). An exploit could allow the attacker to gain authentication information for other users. Cisco Bug IDs: CSCvd86602.

In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation.

Local registry credentials were included directly in the CD4PE deployment definition, which could expose these credentials to users who should not have access to them. This is resolved in Continuous Delivery for Puppet Enterprise 4.0.1.

Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.

A design flaw in authentication in Synology Photo Station 6.0-2528 through 6.7.1-3419 allows local users to obtain credentials via cmdline. Synology Photo Station employs the synophoto_dsm_user program to authenticate username and password by "synophoto_dsm_user --auth USERNAME PASSWORD", and local users are able to obtain credentials by sniffing "/proc/*/cmdline".

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the RiskDB username and password via unprotected log files containing plain text credentials.

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the ADRMS username and password via unprotected log files containing plain text

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

PingID Windows Login prior to 2.8 does not properly set permissions on the Windows Registry entries used to store sensitive API keys under some circumstances.

Under certain conditions SAP Business One (Backup service), versions 9.3, 10.0, allows an attacker with admin permissions to view SYSTEM user password in clear text, leading to Information Disclosure.

IBM Cloud Pak System 2.3 could reveal credential information in the HTTP response to a local privileged user. IBM X-Force ID: 191288.

The IBM QRadar Advisor 1.1 through 2.5.2 with Watson App for IBM QRadar SIEM does not adequately mask all passwords during input, which could be obtained by a physical attacker nearby. IBM X-Force ID: 179536.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 179009

Jenkins Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

Dell EMC Repository Manager (DRM) version 3.2 contains a plain-text password storage vulnerability. Proxy server user password is stored in a plain text in a local database. A local authenticated malicious user with access to the local file system may use the exposed password to access the with privileges of the compromised user.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, and 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184157.

"BigFix Platform is storing clear text credentials within the system's memory. An attacker who is able to gain administrative privileges can use a program to create a memory dump and extract the credentials. These credentials can be used to pivot further into the environment. The principle of least privilege should be applied to all BigFix deployments, limiting administrative access."

Jenkins Metrics Plugin 4.0.2.8 and earlier stores an access key unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

The CODESYS OPC DA Server prior V3.5.18.20 stores PLC passwords as plain text in its configuration file so that it is visible to all authorized Microsoft Windows users of the system.

A lack of password masking in Devolutions Remote Desktop Manager allows physically proximate attackers to observe sensitive data. A caching issue can cause sensitive fields to sometimes stay revealed when closing and reopening a panel, which could lead to involuntarily disclosing sensitive information. This issue affects: Devolutions Remote Desktop Manager 2022.1.24 version and prior versions.

Platform sample code firmware included with 4th Gen Intel Core Processor, 5th Gen Intel Core Processor, 6th Gen Intel Core Processor, and 7th Gen Intel Core Processor potentially exposes password information in memory to a local attacker with administrative privileges.

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

A BIOS password extraction vulnerability has been reported on certain consumer notebooks with firmware F.22 and others. The BIOS password was stored in CMOS in a way that allowed it to be extracted. This applies to consumer notebooks launched in early 2014.

A vulnerability has been identified in Opcenter Execution Core (V8.2), Opcenter Execution Core (V8.3). The application contains an information leakage vulnerability in the handling of web client sessions. A local attacker who has access to the Web Client Session Storage could disclose the passwords of currently logged-in users.

Unprotected Storage of Credentials vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 allows local users to gain access to the video streaming username and password via SQLite files containing plain text credentials.

KNIME Server before 4.12.6 and 4.13.x before 4.13.4 (when installed in unattended mode) keeps the administrator's password in a file without appropriate file access controls, allowing all local users to read its content.

Dell EMC System Update, version 1.9.2 and prior, contain an Unprotected Storage of Credentials vulnerability. A local attacker with user privleges could potentially exploit this vulnerability leading to the disclosure of user passwords.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.