A shell command injection vulnerability in the PAN-OS CLI allows a local authenticated user to escape the restricted shell and escalate privileges. This issue affects only PAN-OS 8.1 versions earlier than PAN-OS 8.1.13. This issue does not affect PAN-OS 7.1, PAN-OS 9.0, or later PAN-OS versions. This issue is fixed in PAN-OS 8.1.13, and all later versions.

Win32k Elevation of Privilege Vulnerability

cnMaestro is vulnerable to a local privilege escalation. By default, a user does not have root privileges. However, a user can run scripts as sudo, which could allow an attacker to gain root privileges when running user scripts outside allowed commands.

In the default configuration of Rangee GmbH RangeeOS 8.0.4, all components are executed in the context of the privileged root user. This may allow a local attacker to break out of the restricted environment or inject malicious code into the application and fully compromise the operating system.

In manager.c in ss-manager in shadowsocks-libev 3.1.0, improper parsing allows command injection via shell metacharacters in a JSON configuration request received via 127.0.0.1 UDP traffic, related to the add_server, build_config, and construct_command_line functions.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCve74432.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

D-Link DSL-7740C does not properly validate user input, which allows an authenticated LAN user to inject arbitrary command.

A violation of secure design principles in Fortinet Meru AP version 8.6.1 and below, version 8.5.5 and below allows attacker to execute unauthorized code or commands via crafted cli commands.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf93332.

FUJITSU F-12C, ARROWS Tab LTE F-01D, ARROWS Kiss F-03D, and REGZA Phone T-01D for Android allows local users to execute arbitrary commands via unspecified vectors.

Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account.

Dell EMC Unity, Dell EMC UnityVSA and Dell EMC Unity XT versions prior to 5.1.2.0.5.007 contain an operating system (OS) command injection Vulnerability. A locally authenticated user with high privileges may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the Unity underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

An issue was discovered on DCN (Digital China Networks) S4600-10P-SI devices before R0241.0470. Due to improper parameter validation in the console interface, it is possible for a low-privileged authenticated attacker to escape the sandbox environment and execute system commands as root via shell metacharacters in the capture command parameters. Command output will be shown on the Serial interface of the device. Exploitation requires both credentials and physical access.

Amaze File Manager before 3.5.1 allows attackers to obtain root privileges via shell metacharacters in a symbolic link.

Proxifier for Mac before 2.19.2, when first run, allows local users to gain privileges by replacing the KLoader binary with a Trojan horse program.

A vulnerability in the CLI of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61351 CSCvb61637. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1645) 2.0(1.82) 1.1(4.136.

A vulnerability in the local-mgmt CLI command of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61394 CSCvb86816. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1658) 2.0(1.115).

A Command Execution Vulnerability exists in IBM Sterling External Authentication Server 2.2.0, 2.3.01, 2.4.0, and 2.4.1 via an unspecified OS command, which could let a local malicious user execute arbitrary code.

A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.

AppUse 4.0 allows shell command injection via a proxy field.

The chroothole_client executable in UCOPIA Wireless Appliance before 5.1.8 allows remote attackers to gain root privileges via a dollar sign ($) metacharacter in the argument to chroothole_client.

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send specially crafted packet at 0x1ea48 to the extracted hostname value from the xml file that is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=<contents of ip node> using sprintf().

Linux Dash up to version v2 is vulnerable to multiple command injection vulnerabilities in the way module names are parsed and then executed resulting in code execution on the server, potentially as root.

Dell VxRail, versions prior to 7.0.450, contains an OS command injection Vulnerability in DCManager command-line utility. A local high privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

OKER G232V1 v1.03.02.20161129 devices provide a root terminal on a UART serial interface without proper access control. This allows attackers with physical access to interrupt the boot sequence in order to execute arbitrary commands with root privileges and conduct further attacks.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Improper Input Validation vulnerability in a particular configuration setting field of Hitachi Energy TXpert Hub CoreTec 4 product, allows an attacker with access to an authorized user with ADMIN or ENGINEER role rights to inject an OS command that is executed by the system. This issue affects: Hitachi Energy TXpert Hub CoreTec 4 version 2.0.0; 2.0.1; 2.1.0; 2.1.1; 2.1.2; 2.1.3; 2.2.0; 2.2.1.

A command injection vulnerability in the CGI program of the Zyxel VPN2S firmware version 1.12 could allow an authenticated, local user to execute arbitrary OS commands.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Pi-hole 4.4 allows a user able to write to /etc/pihole/dns-servers.conf to escalate privileges through command injection (shell metacharacters after an IP address).

Two methods of a utility class in SAP NetWeaver AS ABAP - versions 700, 701, 702, 710, 711, 730, 731, 740, 750, 751, 752, 753, 754, 755, 756, allow an attacker with high privileges and has direct access to SAP System, to inject code when executing with a certain transaction class builder. This could allow execution of arbitrary commands on the operating system, that could highly impact the Confidentiality, Integrity and Availability of the system.

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and issue arbitrary commands to elevate the attacker's privilege level. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions in the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands to elevate the attacker's privilege level. To exploit this vulnerability, the attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

An Improper Neutralization of Special Elements used in a Command vulnerability in one of FortiClient for Mac OS root processes, may allow a local user of the system on which FortiClient is running to execute unauthorized code as root by bypassing a security check.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

Multiple local privilege escalation vulnerabilities have been identified in the LiquidVPN client through 1.37 for macOS. An attacker can communicate with an unprotected XPC service and directly execute arbitrary OS commands as root or load a potentially malicious kernel extension because com.smr.liquidvpn.OVPNHelper uses the value of the "tun_path" or "tap_path" pathname in a kextload() call.

A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).