IBM Security Guardium Big Data Intelligence (SonarG) 3.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 137772.

An issue was discovered in SMA Solar Technology products. All inverters have a very weak password policy for the user and installer password. No complexity requirements or length requirements are set. Also, strong passwords are impossible due to a maximum of 12 characters and a limited set of characters. NOTE: the vendor reports that the 12-character limit provides "a very high security standard." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.

The National Payments Corporation of India BHIM application 1.3 for Android relies on a four-digit passcode, which makes it easier for attackers to obtain access.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

Verizon 4G LTE Network Extender GA4.38 - V0.4.038.2131 utilizes a weak default admin password generation algorithm which generates passwords that are accessible to unauthenticated attackers via the webUI login page.

Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.

Dell PowerScale OneFS versions 8.2.0.x through 9.3.0.x, contain a weak password requirement vulnerability. An administrator may create an account with no password. A remote attacker may potentially exploit this leading to a user account compromise.

Weak Password Requirements in GitHub repository notrinos/notrinoserp prior to 0.7.

An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Once access is gained either by default, common, or cracked passwords, the video recordings (containing sensitive routes, conversations, and footage) are open for downloading by creating a socket to command port 7777, and then downloading video via port 7778 and audio via port 7779.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.

Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.

Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.

Kapsch TrafficCom RIS-9160 & RIS-9260 Roadside Units (RSUs) v3.2.0.829.23, v3.8.0.1119.42, and v4.6.0.1211.28 were discovered to lack secure password requirements for its BIOS Supervisor and User accounts, allowing attackers to bypass authentication via a bruteforce attack.

Askey AP5100W_Dual_SIG_1.01.097 and all prior versions use a weak password at the Operating System (rlx-linux) level. This allows an attacker to gain unauthorized access as an admin or root user to the device Operating System via Telnet or SSH.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

In Daybyday CRM, versions 1.1 through 2.2.0 enforce weak password requirements in the user update functionality. A user with privileges to update his password could change it to a weak password, such as those with a length of a single character. This may allow an attacker to brute-force users’ passwords with minimal to no computational effort.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

A CWE-521: Weak Password Requirements vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to compromise a user account.

etcd before versions 3.3.23 and 3.4.10 does not perform any password length validation, which allows for very short passwords, such as those with a length of one. This may allow an attacker to guess or brute-force users' passwords with little computational effort.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.

Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.

The weak password on the web user interface can be exploited via HTTP or HTTPS. Once such access has been obtained, the other passwords can be changed. The weak password on Linux accounts can be accessed via SSH or Telnet, the former of which is by default enabled on trusted interfaces. While the SSH service does not support root login, a user logging in using either of the other Linux accounts may elevate to root access using the su command if they have access to the associated password.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change the default password for the admin account. They only show a pop-up window suggesting a change but there's no enforcement. An administrator can click Cancel and proceed to use the device without changing the password. Additionally, they disclose the default username within the login.js script. Since many attacks for IoT devices, including malware and exploits, are based on the usage of default credentials, it makes these cameras an easy target for malicious actors.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

In Auto-Maskin RP210E Versions 3.7 and prior, DCU210E Versions 3.7 and prior and Marine Observer Pro (Android App), the software contains a mechanism for users to recover or change their passwords without knowing the original password, but the mechanism is weak.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

There are no requirements for setting a complex password for PiiGAB M-Bus, which could contribute to a successful brute force attack if the password is inline with recommended password guidelines.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

RuoYi v3.8.3 has a Weak password vulnerability in the management system.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 does not enforce an efficient password policy. This may allow an attacker with obtained user credentials to enumerate passwords and impersonate other application users and perform operations on their behalf.

An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

IBM Cognos Analytics 11.1.7 and 11.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196339.