Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.
TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.
The Billion 5200W-T TCLinux Fw $7.3.8.0 v008 130603 router distributed by TrueOnline has a command injection vulnerability in the Time Setting function, which is only accessible by an authenticated user. The vulnerability is in the tools_time.asp page and can be exploited through the uiViewSNTPServer parameter. Authentication can be achieved by exploiting CVE-2017-18373.
TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/dhcps command to cgi-bin/luci, related to the zone_get_iface_bydev function in /usr/lib/lua/luci/controller/admin/dhcps.lua in uhttpd.
In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.
A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters
lib/rrd.php in Cacti 1.1.27 allows remote authenticated administrators to execute arbitrary OS commands via the path_rrdtool parameter in an action=save request to settings.php.
An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.
A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.
The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.
An exploitable command injection vulnerability exists in the iw_webs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
ginkgosnmp.inc in HP System Management Homepage (SMH) allows remote authenticated users to execute arbitrary commands via shell metacharacters in the PATH_INFO to smhutil/snmpchp.php.en.
An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)
ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands.
SQL injection vulnerability in the Help Desk application in Wave EMBASSY Remote Administration Server (ERAS) allows remote authenticated users to execute arbitrary SQL commands via the ct100$4MainController$TextBoxSearchValue parameter (aka the search field), leading to execution of operating-system commands.
The Nexus Yum Repository Plugin in v2 is vulnerable to Remote Code Execution when instances using CommandLineExecutor.java are supplied vulnerable data, such as the Yum Configuration Capability.
cgi-bin/write.cgi in Anti-Web through 3.8.7, as used on NetBiter / HMS, Ouman EH-net, Alliance System WS100 --> AWU 500, Sauter ERW100F001, Carlo Gavazzi SIU-DLG, AEDILIS SMART-1, SYXTHSENSE WebBiter, ABB SREA, and ASCON DY WebServer devices, allows remote authenticated users to execute arbitrary OS commands via crafted multipart/form-data content, a different vulnerability than CVE-2017-9097.
In OTRS 6.0.x up to and including 6.0.1, OTRS 5.0.x up to and including 5.0.24, and OTRS 4.0.x up to and including 4.0.26, an attacker who is logged into OTRS as an agent can manipulate form parameters (related to PGP) and execute arbitrary shell commands with the permissions of the OTRS or web server user.
NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.
A vulnerability classified as critical was found in SourceCodester Human Resource Management System 1.0. This vulnerability affects unknown code of the component Profile Photo Handler. The manipulation of the argument parameter leads to os command injection. The attack can be initiated remotely. The identifier of this vulnerability is VDB-210772.
OS Command Injection vulnerability in Hitachi RAID Manager Storage Replication Adapter allows remote authenticated users to execute arbitrary OS commands. This issue affects: Hitachi RAID Manager Storage Replication Adapter 02.01.04 versions prior to 02.03.02 on Windows; 02.05.00 versions prior to 02.05.01 on Windows and Docker.
Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.
A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.
A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.
Artica Pandora FMS 7.44 allows remote command execution via the events feature.
ROOT version 6.9.03 and below is vulnerable to an authenticated shell metacharacter injection in the rootd daemon resulting in remote code execution
TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the iface field of an admin/diagnostic command to cgi-bin/luci, related to the zone_get_effect_devices function in /usr/lib/lua/luci/controller/admin/diagnostic.lua in uhttpd.
rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.
Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.
A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.
On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.
Certain TP-Link devices allow Command Injection. This affects NC260 1.5.2 build 200304 and NC450 1.5.3 build 200304.
The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11 and 4.0.x before 4.0.9 allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Ref ID 34896.
The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11, 4.0.x before 4.0.8, and 4.1.x before 4.1.1 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 34299.
An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.
All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by command injection vulnerability. Due to insufficient parameter validation check, an authorized user can exploit this vulnerability to take control of user router system.
The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.8 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 33080.
Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote authenticated users to execute arbitrary commands as demonstrated by a ; (semicolon) to the ping command feature.
The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11 and 4.0.x before 4.0.9 allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Ref ID 35249.
The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.10 and 4.0.x before 4.0.5 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 31116.
An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the openvpnServer0_tmp= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.
The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.8 and 4.1.x before 4.1.1 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 33476.
IBM Spectrum Scale 4.2 and 5.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172093.
The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 34502.
The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 34595.
trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.
Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.
IBM Security Access Manager Appliance 9.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 128372.
IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.
A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.