In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline]

In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - Ensure payload is zero when using key slot We could leak stack memory through the payload field when running AES with a key from one of the hardware's key slots. Fix this by ensuring the payload field is set to 0 in such cases. This does not affect the common use case when the key is supplied from main memory via the descriptor payload.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: Avoid explicit cpumask var allocation on stack For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask variable on stack is not recommended since it can cause potential stack overflow. Instead, kernel code should always use *cpumask_var API(s) to allocate cpumask var in config-neutral way, leaving allocation strategy to CONFIG_CPUMASK_OFFSTACK. Use *cpumask_var API(s) to address it.

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix buffer overflow in print_cpu_stall_info() The rcuc-starvation output from print_cpu_stall_info() might overflow the buffer if there is a huge difference in jiffies difference. The situation might seem improbable, but computers sometimes get very confused about time, which can result in full-sized integers, and, in this case, buffer overflow. Also, the unsigned jiffies difference is printed using %ld, which is normally for signed integers. This is intentional for debugging purposes, but it is not obvious from the code. This commit therefore changes sprintf() to snprintf() and adds a clarifying comment about intention of %ld format. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In nDPI through 3.2, the Oracle protocol dissector has a heap-based buffer over-read in ndpi_search_oracle in lib/protocols/oracle.c.

An out-of-bounds read vulnerability was found in Netfilter Connection Tracking (conntrack) in the Linux kernel. This flaw allows a remote user to disclose sensitive information via the DCCP protocol.

The TCP stack in the Linux kernel through 4.10.6 mishandles the SCM_TIMESTAMPING_OPT_STATS feature, which allows local users to obtain sensitive information from the kernel's internal socket data structures or cause a denial of service (out-of-bounds read) via crafted system calls, related to net/core/skbuff.c and net/socket.c.

A memory out-of-bounds read flaw was found in the Linux kernel before 5.9-rc2 with the ext3/ext4 file system, in the way it accesses a directory with broken indexing. This flaw allows a local user to crash the system if the directory exists. The highest threat from this vulnerability is to system availability.

A kernel data leak due to an out-of-bound read was found in the Linux kernel in inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() functions present since version 4.7-rc1 through version 4.13. A data leak happens when these functions fill in sockaddr data structures used to export socket's diagnostic information. As a result, up to 100 bytes of the slab data could be leaked to a userspace.

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix possible out-of-bounds in gsm0_receive() Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size.

In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.

The Linux kernel was found vulnerable out of bounds memory access in the drivers/video/fbdev/sm712fb.c:smtcfb_read() function. The vulnerability could result in local attackers being able to crash the kernel.

Insufficient validation of untrusted input in V8 in Google Chrome prior to 59.0.3071.104 for Mac, Windows, and Linux, and 59.0.3071.117 for Android, allowed a remote attacker to perform out of bounds memory access via a crafted HTML page.

An out-of-bounds read flaw was found in the Linux kernel’s io_uring module in the way a user triggers the io_read() function with some special parameters. This flaw allows a local user to read some memory out of bounds.

In the Linux kernel, the following vulnerability has been resolved: phy: marvell: a3700-comphy: Fix out of bounds read There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr' every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'. Make sure 'gbe_phy_init[addr]' is used when all elements of 'gbe_phy_init_fix' array are handled. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options.").

Skia, as used in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allows remote attackers to cause a denial of service (out-of-bounds read) via vectors related to a "user gesture check for dangerous file downloads."

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not.

An out-of-bounds read vulnerability was discovered in linux kernel in the smc protocol stack, causing remote dos.

In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated---

Adobe Flash Player versions 32.0.0.156 and earlier, 32.0.0.156 and earlier, and 32.0.0.156 and earlier have an out-of-bounds read vulnerability. Successful exploitation could lead to information disclosure .

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte When adding a rule with 32 destinations, we hit the following out-of-band access issue: BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70 This patch fixes the issue by both increasing the allocated buffers to accommodate for the needed actions and by checking the number of actions to prevent this issue when a rule with too many actions is provided.

A flaw was found within the parsing of extended attributes in the kernel ksmbd module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this to disclose sensitive information on affected installations of Linux. Only systems with ksmbd enabled are vulnerable to this CVE.

Data leak in Canvas in Google Chrome prior to 99.0.4844.51 allowed a remote attacker who convinced a user to engage in screen sharing to potentially leak cross-origin data via a crafted HTML page.

A flaw was found in the KVM's AMD code for supporting the Secure Encrypted Virtualization-Encrypted State (SEV-ES). A KVM guest using SEV-ES can trigger out-of-bounds reads and writes in the host kernel via a malicious VMGEXIT for a string I/O instruction (for example, outs or ins) using the exit reason SVM_EXIT_IOIO. This issue results in a crash of the entire system or a potential guest-to-host escape scenario.

An elevation of privilege vulnerability exists in the NVIDIA GPU driver (gm20b_clk_throt_set_cdev_state), where an out of bound memory read is used as a function pointer could lead to code execution in the kernel.This issue is rated as high because it could allow a local malicious application to execute arbitrary code within the context of a privileged process. Product: Android. Version: N/A. Android ID: A-34705430. References: N-CVE-2017-6264.

The ip_cmsg_recv_checksum function in net/ipv4/ip_sockglue.c in the Linux kernel before 4.10.1 has incorrect expectations about skb data layout, which allows local users to cause a denial of service (buffer over-read) or possibly have unspecified other impact via crafted system calls, as demonstrated by use of the MSG_MORE flag in conjunction with loopback UDP transmission.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled.

In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: fix out of bounds memory access The problem is detected by KASAN. btrtl driver uses private hci data to store 'struct btrealtek_data'. If btrtl driver is used with btusb, then memory for private hci data is allocated in btusb. But no private data is allocated after hci_dev, when btrtl is used with hci_h5. This commit adds memory allocation for hci_h5 case. ================================================================== BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl] Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76 Hardware name: Pine64 PinePhone (1.2) (DT) Workqueue: hci0 hci_power_on [bluetooth] Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8+0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0 really_probe+0x254/0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+0x88/0x158 async_run_entry_fn+0xd0/0x388 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf+0xac/0x178 flush_to_ldisc+0x130/0x2c8 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Second to last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

A race problem was seen in the vt_k_ioctl in drivers/tty/vt/vt_ioctl.c in the Linux kernel, which may cause an out of bounds read in vt as the write access to vc_mode is not protected by lock-in vt_ioctl (KDSETMDE). The highest threat from this vulnerability is to data confidentiality.

In the Linux kernel, the following vulnerability has been resolved: crypto: arm64/neonbs - fix out-of-bounds access on short input The bit-sliced implementation of AES-CTR operates on blocks of 128 bytes, and will fall back to the plain NEON version for tail blocks or inputs that are shorter than 128 bytes to begin with. It will call straight into the plain NEON asm helper, which performs all memory accesses in granules of 16 bytes (the size of a NEON register). For this reason, the associated plain NEON glue code will copy inputs shorter than 16 bytes into a temporary buffer, given that this is a rare occurrence and it is not worth the effort to work around this in the asm code. The fallback from the bit-sliced NEON version fails to take this into account, potentially resulting in out-of-bounds accesses. So clone the same workaround, and use a temp buffer for short in/outputs.

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix array index out of bound exception Fix array index out of bound exception in fc_rport_prli_resp().

In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access.

A heap address information leak while using L2CAP_GET_CONF_OPT was discovered in the Linux kernel before 5.1-rc1.

The ip6gre_err function in net/ipv6/ip6_gre.c in the Linux kernel allows remote attackers to have unspecified impact via vectors involving GRE flags in an IPv6 packet, which trigger an out-of-bounds access.

fs/nfsd/trace.h in the Linux kernel before 5.13.4 might allow remote attackers to cause a denial of service (out-of-bounds read in strlen) by sending NFS traffic when the trace event framework is being used for nfsd.

An out-of-bounds read in V8 in Google Chrome prior to 57.0.2987.133 for Linux, Windows, and Mac, and 57.0.2987.132 for Android, allowed a remote attacker to obtain heap memory contents via a crafted HTML page.

A use after free in printing in Google Chrome prior to 57.0.2987.133 for Linux and Windows allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.

A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.

Incorrect handling of complex species in V8 in Google Chrome prior to 57.0.2987.98 for Linux, Windows, and Mac and 57.0.2987.108 for Android allowed a remote attacker to execute arbitrary code via a crafted HTML page.

In __f2fs_setxattr in fs/f2fs/xattr.c in the Linux kernel through 5.15.11, there is an out-of-bounds memory access when an inode has an invalid last xattr entry.

It was discovered that the eBPF implementation in the Linux kernel did not properly track bounds information for 32 bit registers when performing div and mod operations. A local attacker could use this to possibly execute arbitrary code.