Receipt of a specific MPLS or IPv6 packet on the core facing interface of an MX Series device configured for Broadband Edge (BBE) service may trigger a kernel crash (vmcore), causing the device to reboot. The issue is specific to the processing of packets destined to BBE clients connected to MX Series subscriber management platforms. This issue affects MX Series running Juniper Networks Junos OS: 17.2 versions starting from17.2R2-S6, 17.2R3 and later releases, prior to 17.2R3-S3; 17.3 versions starting from 17.3R2-S4, 17.3R3-S2 and later releases, prior to 17.3R2-S5, 17.3R3-S5; 17.4 versions starting from 17.4R2 and later releases, prior to 17.4R2-S7,17.4R3; 18.1 versions starting from 18.1R2-S3, 18.1R3 and later releases, prior to 18.1R3-S6; 18.2 versions starting from18.2R1-S1, 18.2R2 and later releases, prior to 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D51, 18.2X75-D60; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R1-S3, 19.1R2; 19.2 versions prior to 19.2R1-S2, 19.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R2-S6.

An Incorrect Initialization of Resource vulnerability in the Internal Device Manager (IDM) of Juniper Networks Junos OS on EX4000 models allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On EX4000 models with 48 ports (EX4000-48T, EX4000-48P, EX4000-48MP) a high volume of traffic destined to the device will cause an FXPC crash and restart, which leads to a complete service outage until the device has automatically restarted. The following reboot reason can be seen in the output of 'show chassis routing-engine' and as a log message:   reason=0x4000002 reason_string=0x4000002:watchdog + panic with core dump This issue affects Junos OS on EX4000-48T, EX4000-48P and EX4000-48MP: * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect versions before 24.4R1 as the first Junos OS version for the EX4000 models was 24.4R1.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In specific cases the state of TCP sessions that are terminated is not cleared, which over time leads to an exhaustion of resources, preventing new connections to the control plane from being established. A continuously increasing number of connections shown by: user@host > show system connections is indicative of the problem. To recover the respective RE needs to be restarted manually. This issue only affects IPv4 but does not affect IPv6. This issue only affects TCP sessions established in-band (over an interface on an FPC) but not out-of-band (over the management ethernet port on the routing-engine). This issue affects Junos OS Evolved:  * All versions before 21.4R3-S9-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.4 version before 22.4R3-S3-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R2-EVO.

An Improper Validation of Specified Type of Input vulnerability in the packet forwarding engine (pfe) Juniper Networks Junos OS on SRX5000 Series allows an unauthenticated, network based attacker to cause a Denial of Service (Dos). When a non-clustered SRX5000 device receives a specifically malformed packet this will cause a flowd crash and restart. This issue affects Junos OS: * 22.1 releases 22.1R1 and later before 22.2R3-S5, * 22.3 releases before 22.3R3-S4, * 22.4 releases before 22.4R3-S4, * 23.2 releases before 23.2R2-S2, * 23.4 releases before 23.4R2-S1, * 24.2 releases before 24.2R1-S1, 24.2R2. Please note that the PR does indicate that earlier versions have been fixed as well, but these won't be adversely impacted by this.

An Uncontrolled Resource Consumption vulnerability in the http daemon (httpd) of Juniper Networks Junos OS on SRX Series, QFX Series, MX Series and EX Series allows an unauthenticated, network-based attacker to cause Denial-of-Service (DoS). An attacker can send specific HTTPS connection requests to the device, triggering the creation of processes that are not properly terminated. Over time, this leads to resource exhaustion, ultimately causing the device to crash and restart. The following command can be used to monitor the resource usage: user@host> show system processes extensive | match mgd | count This issue affects Junos OS on SRX Series and EX Series: All versions before 21.4R3-S7, from 22.2 before 22.2R3-S4, from 22.3 before 22.3R3-S3, from 22.4 before 22.4R3-S2, from 23.2 before 23.2R2-S1, from 23.4 before 23.4R1-S2, 23.4R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS).  In a scenario where BGP Monitoring Protocol (BMP) is configured with rib-in pre-policy monitoring, receiving a BGP update with a specifically malformed AS PATH attribute over an established BGP session, can cause an RPD crash and restart. This issue affects: Junos OS:  * All versions before 21.2R3-S8, * 21.4 versions before 21.4R3-S8, * 22.2 versions before 22.2R3-S4, * 22.3 versions before 22.3R3-S3, * 22.4 versions before 22.4R3-S2, * 23.2 versions before 23.2R2-S1, * 23.4 versions before 23.4R1-S2, 23.4R2; Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * 21.4 versions before 21.4R3-S8-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.3 versions before 22.3R3-S3-EVO, * 22.4 versions before 22.4R3-S2-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R1-S2-EVO, 23.4R2-EVO.

BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.

An Improper Validation of Array Index vulnerability in the SIP ALG of Juniper Networks Junos OS on SRX 5000 Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an attacker sends an SIP packets with a malformed SDP field then the SIP ALG can not process it which will lead to an FPC crash and restart. Continued receipt of these specific packets will lead to a sustained Denial of Service. This issue can only occur when both below mentioned conditions are fulfilled: 1. Call distribution needs to be enabled: [security alg sip enable-call-distribution] 2. The SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. To confirm whether SIP ALG is enabled on SRX, and MX with SPC3 use the following command: user@host> show security alg status | match sip SIP : Enabled This issue affects Juniper Networks Junos OS on SRX 5000 Series: 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R1-S1, 22.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2.

A Denial of Service (DoS) vulnerability in BGP in Juniper Networks Junos OS configured as a VPLS PE allows an attacker to craft a specific BGP message to cause the routing protocol daemon (rpd) process to crash and restart. While rpd restarts after a crash, repeated crashes can result in an extended DoS condition. This issue only affects PE routers configured with BGP Auto discovery for LDP VPLS. Other BGP configurations are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D81; 12.3 versions prior to 12.3R12-S12; 12.3X48 versions prior to 12.3X48-D76; 14.1X53 versions prior to 14.1X53-D48; 15.1 versions prior to 15.1F6-S12, 15.1R7-S2; 15.1X49 versions prior to 15.1X49-D150; 15.1X53 versions prior to 15.1X53-D235, 15.1X53-D495, 15.1X53-D590, 15.1X53-D68; 16.1 versions prior to 16.1R3-S10, 16.1R4-S12, 16.1R6-S6, 16.1R7-S1; 16.2 versions prior to 16.2R2-S7; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.1 versions prior to 18.1R2-S3, 18.1R3.

An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. In some cases, rpd fails to restart requiring a manual restart via the 'restart routing' CLI command. This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established. Systems without BGP traceoptions enabled are not affected by this issue. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects: Junos OS:  * All versions before 21.4R3-S8,  * 22.2 before 22.2R3-S5,  * 22.3 before 22.3R3-S4,  * 22.4 before 22.4R3-S3,  * 23.2 before 23.2R2-S2,  * 23.4 before 23.4R2;  Junos OS Evolved:  * All versions before 21.4R3-S8-EVO,  * 22.2-EVO before 22.2R3-S5-EVO,  * 22.3-EVO before 22.3R3-S4-EVO,  * 22.4-EVO before 22.4R3-S3-EVO,  * 23.2-EVO before 23.2R2-S2-EVO,  * 23.4-EVO before 23.4R2-EVO.

An Uncontrolled Resource Consumption vulnerability in the aftmand process of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to consume memory resources, resulting in a Denial of Service (DoS) condition. The processes do not recover on their own and must be manually restarted. This issue affects both IPv4 and IPv6.  Changes in memory usage can be monitored using the following CLI command: user@device> show system memory node <fpc slot> | grep evo-aftmann This issue affects Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * 21.3 versions before 21.3R3-S5-EVO,  * 21.4 versions before 21.4R3-S5-EVO,  * 22.1 versions before 22.1R3-S4-EVO,  * 22.2 versions before 22.2R3-S4-EVO, * 22.3 versions before 22.3R3-S3-EVO, * 22.4 versions before 22.4R2-S2-EVO, 22.4R3-EVO,  * 23.2 versions before 23.2R1-S1-EVO, 23.2R2-EVO.

A Heap-based Buffer Overflow vulnerability in the telemetry sensor process (sensord) of Juniper Networks Junos OS on MX240, MX480, MX960 platforms using MPC10E causes a steady increase in memory utilization, ultimately leading to a Denial of Service (DoS). When the device is subscribed to a specific subscription on Junos Telemetry Interface, a slow memory leak occurs and eventually all resources are consumed and the device becomes unresponsive. A manual reboot of the Line Card will be required to restore the device to its normal functioning.  This issue is only seen when telemetry subscription is active. The Heap memory utilization can be monitored using the following command:   > show system processes extensive The following command can be used to monitor the memory utilization of the specific sensor   > show system info | match sensord PID NAME MEMORY PEAK MEMORY %CPU THREAD-COUNT CORE-AFFINITY UPTIME 1986 sensord 877.57MB 877.57MB 2 4 0,2-15 7-21:41:32 This issue affects Junos OS:  * from 21.2R3-S5 before 21.2R3-S7,  * from 21.4R3-S4 before 21.4R3-S6,  * from 22.2R3 before 22.2R3-S4,  * from 22.3R2 before 22.3R3-S2,  * from 22.4R1 before 22.4R3,  * from 23.2R1 before 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in the rpd-server of Juniper Networks Junos OS and Junos OS Evolved within cRPD allows an unauthenticated network-based attacker sending crafted TCP traffic to the routing engine (RE) to cause a CPU-based Denial of Service (DoS). If specially crafted TCP traffic is received by the control plane, or a TCP session terminates unexpectedly, it will cause increased control plane CPU utilization by the rpd-server process. While not explicitly required, the impact is more severe when RIB sharding is enabled. Task accounting shows unexpected reads by the RPD Server jobs for shards: user@junos> show task accounting detail ... read:RPD Server.0.0.0.0+780.192.168.0.78+48886 TOT:00000003.00379787 MAX:00000000.00080516 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49144 TOT:00000004.00007565 MAX:00000000.00080360 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+49694 TOT:00000003.00600584 MAX:00000000.00080463 RUNS: 233888\ read:RPD Server.0.0.0.0+780.192.168.0.78+50246 TOT:00000004.00346998 MAX:00000000.00080338 RUNS: 233888\ This issue affects: Junos OS with cRPD:  * All versions before 21.2R3-S8,  * 21.4 before 21.4R3-S7,  * 22.1 before 22.1R3-S6,  * 22.2 before 22.2R3-S4,  * 22.3 before 22.3R3-S3,  * 22.4 before 22.4R3-S2,  * 23.2 before 23.2R2-S2,  * 24.2 before 24.2R2;  Junos OS Evolved with cRPD:  * All versions before 21.4R3-S7-EVO,  * 22.2 before 22.2R3-S4-EVO,  * 22.3 before 22.3R3-S3-EVO,  * 22.4 before 22.4R3-S2-EVO,  * 23.2 before 23.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart. When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing. Note that PMI with GRE performance acceleration is only supported on specific SRX platforms. This issue affects Junos OS on the SRX Series: * all versions before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S5,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart. This issue affects Junos OS on SRX and MX Series: * all versions before 22.4R3-S7, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2.

An Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series with MPC10/11 or LC9600, MX304, and Junos OS Evolved on ACX Series and PTX Series allows an unauthenticated, network based attacker to cause a Denial-of-Service (DoS). This issue can occur in two scenarios: 1. If a device, which is configured with SFLOW and ECMP, receives specific valid transit traffic, which is subject to sampling, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. (This scenario is only applicable to PTX but not to ACX or MX.) 2. If a device receives a malformed CFM packet on an interface configured with CFM, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. Please note that the CVSS score is for the formally more severe issue 1. The CVSS score for scenario 2. is: 6.5 (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) This issue affects Junos OS: * All versions before 21.2R3-S4, * 21.4 versions before 21.4R2, * 22.2 versions before 22.2R3-S2;  Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * 21.4 versions before 21.4R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis management daemon (chassisd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an attempt is made to access specific sensors on platforms not supporting these sensors, either via GRPC or netconf, chassisd will crash and restart leading to a restart of all FPCs and thereby a complete outage. This issue affects Junos OS: * 21.4 versions from 21.4R3 before 21.4R3-S5, * 22.1 versions from 22.1R3 before 22.1R3-S4, * 22.2 versions from 22.2R2 before 22.2R3, * 22.3 versions from 22.3R1 before 22.3R2-S2, 22.3R3, * 22.4 versions from 22.4R1 before 22.4R2. This issue does not affect Junos OS versions earlier than 21.4.

An Improper Locking vulnerability in the GTP plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos). If an SRX Series device receives a specifically malformed GPRS Tunnelling Protocol (GTP) Modify Bearer Request message, a lock is acquired and never released. This results in other threads not being able to acquire a lock themselves, causing a watchdog timeout leading to FPC crash and restart. This issue leads to a complete traffic outage until the device has automatically recovered. This issue affects Junos OS on SRX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S1, 25.2R2.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specific BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established.  Systems without BGP traceoptions enabled are not affected by this issue. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8,  * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S3,  * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R2;  Junos OS Evolved:  * All versions before 21.2R3-S8-EVO,  * from 21.4-EVO before 21.4R3-S8-EVO,  * from 22.2-EVO before 22.2R3-S4-EVO,  * from 22.3-EVO before 22.3R3-S4-EVO, * from 22.4-EVO before 22.4R3-S3-EVO,  * from 23.2-EVO before 23.2R2-S1-EVO,  * from 23.4-EVO before 23.4R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.

A Missing Release of Resource after Effective Lifetime vulnerability the xinetd process, responsible for spawning SSH daemon (sshd) instances, of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS) by blocking SSH access for legitimate users. Continued receipt of these connections will create a sustained Denial of Service (DoS) condition. The issue is triggered when a high rate of concurrent SSH requests are received and terminated in a specific way, causing xinetd to crash, and leaving defunct sshd processes. Successful exploitation of this vulnerability blocks both SSH access as well as services which rely upon SSH, such as SFTP, and Netconf over SSH. Once the system is in this state, legitimate users will be unable to SSH to the device until service is manually restored.  See WORKAROUND section below. Administrators can monitor an increase in defunct sshd processes by utilizing the CLI command:   > show system processes | match sshd   root   25219 30901 0 Jul16 ?       00:00:00 [sshd] <defunct> This issue affects Juniper Networks Junos OS Evolved: * All versions prior to 21.4R3-S7-EVO * 22.3-EVO versions prior to 22.3R2-S2-EVO, 22.3R3-S2-EVO; * 22.4-EVO versions prior to 22.4R3-EVO; * 23.2-EVO versions prior to 23.2R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved 22.1-EVO nor 22.2-EVO.

A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS). On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC. This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue. This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC: * all versions before 21.2R3-S10,  * from 21.4 before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S6,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

This is a similar, but different vulnerability than the issue reported as CVE-2024-39549. A double-free vulnerability in the routing process daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a malformed BGP Path attribute update which allocates memory used to log the bad path attribute. This double free of memory is causing an rpd crash, leading to a Denial of Service (DoS). This issue affects: Junos OS:  * from 22.4 before 22.4R3-S4. Junos OS Evolved: * from 22.4 before 22.4R3-S4-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage. This issue affects Junos OS: 21.2 releases from 21.2R3-S5 before 21.2R3-S6. This issue does not affect earlier or later releases.

An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart. This issue affects Junos OS on SRX Series: * 23.2 versions from 23.2R2-S2 before 23.2R2-S5,  * 23.4 versions from 23.4R2-S1 before 23.4R2-S5, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R1-S3, 24.4R2. Earlier versions of Junos are also affected, but no fix is available.

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the routing process daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a malformed BGP Path attribute update which allocates memory used to log the bad path attribute. This memory is not properly freed in all circumstances, leading to a Denial of Service (DoS). Consumed memory can be freed by manually restarting Routing Protocol Daemon (rpd). Memory utilization could be monitored by:  user@host> show system memory or show system monitor memory status This issue affects: Junos OS:  * All versions before 21.2R3-S8,  * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S4,  * from 22.3 before 22.3R3-S3,  * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * from 21.4 before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S3-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

A Use of Externally-Controlled Format String vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If DNS Domain Generation Algorithm (DGA) detection or tunnel detection, and DNS-filtering traceoptions are configured, and specific valid transit DNS traffic is received this causes a PFE crash and restart, leading to a Denial of Service. This issue affects Junos OS: * All versions before 21.4R3-S6, * 22.2 versions before 22.2R3-S3, * 22.3 versions before 22.3R3-S3, * 22.4 versions before 22.4R3, * 23.2 versions before 23.2R2.

An Out-of-Bounds Read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects systems configured in either of two ways: * systems with BGP traceoptions enabled * systems with BGP traffic engineering configured This issue can affect iBGP and eBGP with any address family configured. The specific attribute involved is non-transitive, and will not propagate across a network. This issue affects: Junos OS:  * All versions before 21.4R3-S8, * 22.2 before 22.2R3-S5,  * 22.3 before 22.3R3-S4,  * 22.4 before 22.4R3-S3,  * 23.2 before 23.2R2-S2,  * 23.4 before 23.4R2;  Junos OS Evolved:  * All versions before 21.4R3-S8-EVO,  * 22.2-EVO before 22.2R3-S5-EVO,  * 22.3-EVO before 22.3R3-S4-EVO,  * 22.4-EVO before 22.4R3-S3-EVO,  * 23.2-EVO before 23.2R2-S2-EVO,  * 23.4-EVO before 23.4R2-EVO.

An Incorrect Behavior Order vulnerability in the MAP-E automatic tunneling mechanism of Juniper Networks Junos OS allows an attacker to send certain malformed IPv4 or IPv6 packets to cause a Denial of Service (DoS) to the PFE on the device which is disabled as a result of the processing of these packets. Continued receipt and processing of these malformed IPv4 or IPv6 packets will create a sustained Denial of Service (DoS) condition. This issue only affects MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. An indicator of compromise is the output: FPC ["FPC ID" # e.g. "0"] PFE #{PFE ID # e.g. "1"] : Fabric Disabled Example: FPC 0 PFE #1 : Fabric Disabled when using the command: show chassis fabric fpcs An example of a healthy result of the command use would be: user@device-re1> show chassis fabric fpcs Fabric management FPC state: FPC 0 PFE #0 Plane 0: Plane enabled Plane 1: Plane enabled Plane 2: Plane enabled Plane 3: Plane enabled Plane 4: Plane enabled Plane 5: Plane enabled Plane 6: Plane enabled Plane 7: Plane enabled This issue affects: Juniper Networks Junos OS on MX Series with MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the the Public Key Infrastructure daemon (pkid) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause Denial of Service (DoS). The pkid is responsible for the certificate verification. Upon a failed verification, the pkid uses all CPU resources and becomes unresponsive to future verification attempts. This means that all subsequent VPN negotiations depending on certificate verification will fail. This CPU utilization of pkid can be checked using this command:   root@srx> show system processes extensive | match pkid   xxxxx  root  103  0  846M  136M  CPU1  1 569:00 100.00% pkid This issue affects: Juniper Networks Junos OS * All versions prior to 20.4R3-S10; * 21.2 versions prior to 21.2R3-S7; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S3; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R3; * 23.2 versions prior to 23.2R1-S2, 23.2R2.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

A Stack-based Buffer Overflow vulnerability in Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS MX Series platforms with SPC3 and MS-MPC/-MIC, when URL filtering is enabled and a specific URL request is received and processed, flowd will crash and restart. Continuous reception of the specific URL request will lead to a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * all versions before 21.2R3-S6, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S3, * from 22.2 before 22.2R3-S1, * from 22.3 before 22.3R2-S2, 22.3R3, * from 22.4 before 22.4R2-S1, 22.4R3.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to send a specific routing update, causing an rpd core due to memory corruption, leading to a Denial of Service (DoS). This issue can only be triggered when the system is configured for CoS-based forwarding (CBF) with a policy map containing a cos-next-hop-map action (see below). This issue affects: Junos OS: * all versions before 20.4R3-S10, * from 21.2 before 21.2R3-S8, * from 21.3 before 21.3R3, * from 21.4 before 21.4R3, * from 22.1 before 22.1R2; Junos OS Evolved: * all versions before 21.2R3-S8-EVO, * from 21.3 before 21.3R3-EVO, * from 21.4 before 21.4R3-EVO, * from 22.1 before 22.1R2-EVO.

A Stack-based Buffer Overflow vulnerability in the Routing Protocol Daemon (RPD) component of Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause an rpd crash, leading to Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when EVPN is configured, and a specific EVPN type-5 route is received via BGP, rpd crashes and restarts. Continuous receipt of this specific route will lead to a sustained Denial of Service (DoS) condition. This issue affects: Junos OS: * all versions before 21.2R3-S7, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S4, * from 22.2 before 22.2R3-S2, * from 22.3 before 22.3R3-S1, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * all versions before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S4-EVO, * from 22.2-EVO before 22.2R3-S2-EVO, * from 22.3-EVO before 22.3R3-S1-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.

An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When a high amount of specific traffic is received on a SRX4600 device, due to an error in internal packet handling, a consistent rise in CPU memory utilization occurs. This results in packet drops in the traffic and eventually the PFE crashes. A manual reboot of the PFE will be required to restore the device to original state. This issue affects Junos OS:   * 21.2 before 21.2R3-S7, * 21.4 before 21.4R3-S6,  * 22.1 before 22.1R3-S5, * 22.2 before 22.2R3-S3, * 22.3 before 22.3R3-S2, * 22.4 before 22.4R3, * 23.2 before 23.2R1-S2, 23.2R2.

A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer. This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring: [ protocols bgp ... disable-4byte-as ] Established BGP sessions can be checked by executing: show bgp neighbor <IP address> | match "4 byte AS" This issue affects: Junos OS:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved:  * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-Of-Service (DoS). When an affected system receives a specific BGP EVPN update message over an established BGP session, this causes an rpd crash and restart. A BGP EVPN configuration is not necessary to be vulnerable. If peers are not configured to send BGP EVPN updates to a vulnerable device, then this issue can't occur. This issue affects iBGP and eBGP, over IPv4 and IPv6. This issue affects: Junos OS: * 23.4 versions from 23.4R2-S3 before 23.4R2-S5, * 24.2 versions from 24.2R2 before 24.2R2-S1, * 24.4 versions before 24.4R1-S3, 24.4R2; Junos OS Evolved: * 23.4-EVO versions from 23.4R2-S2-EVO before 23.4R2-S5-EVO, * 24.2-EVO versions from 24.2R2-EVO before 24.2R2-S1-EVO, * 24.4-EVO versions before 24.4R1-S3-EVO, 24.4R2-EVO.

An Uncontrolled Resource Consumption vulnerability in the HTTP daemon (httpd) of Juniper Networks Junos Space allows an unauthenticated network-based attacker flooding the device with inbound API calls to consume all resources on the system, leading to a Denial of Service (DoS). After continuously flooding the system with inbound connection requests, all available file handles become consumed, blocking access to the system via SSH and the web user interface (WebUI), resulting in a management interface DoS. A manual reboot of the system is required to restore functionality. This issue affects Junos Space: * all versions before 22.2R1 Patch V3, * from 23.1 before 23.1R1 Patch V3.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX1600, SRX2300, SRX 4000 Series, and SRX5000 Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If a sequence of specific PIM packets is received, this will cause a flowd crash and restart. This issue affects Junos OS: * all versions before 21.2R3-S9, * 21.4 versions before 21.4R3-S11, * 22.2 versions before 22.2R3-S7, * 22.4 versions before 22.4R3-S6, * 23.2 versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2. This is a similar, but different vulnerability than the issue reported as CVE-2024-47503, published in JSA88133.

A Use After Free vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an attacker sending a BGP update with a specifically malformed AS PATH to cause rpd to crash, resulting in a Denial of Service (DoS). Continuous receipt of the malformed AS PATH attribute will cause a sustained DoS condition. On all Junos OS and Junos OS Evolved platforms, the rpd process will crash and restart when a specifically malformed AS PATH is received within a BGP update and traceoptions are enabled. This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established. Systems without BGP traceoptions enabled are not impacted by this issue. This issue affects:  Junos OS: * All versions before 21.2R3-S9,  * all versions of 21.4, * from 22.2 before 22.2R3-S6,  * from 22.4 before 22.4R3-S5,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S4,  * from 24.2 before 24.2R2;  Junos OS Evolved:  * All versions before 22.4R3-S5-EVO,  * from 23.2-EVO before 23.2R2-S3-EVO,  * from 23.4-EVO before 23.4R2-S4-EVO,  * from 24.2-EVO before 24.2R2-EVO. This is a more complete fix for previously published CVE-2024-39549 (JSA83011).

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to send a specific packet causing the packet forwarding engine (PFE) to crash and restart, resulting in a Denial of Service (DoS). By continuously sending these specific packets, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue only affects Juniper Networks NFX Series, SRX Series platforms when SSL Proxy is configured. This issue affects Juniper Networks Junos OS on NFX Series and SRX Series: 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S1; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions on NFX Series and SRX Series prior to 18.3R1.

An improper restriction of operations within the bounds of a memory buffer vulnerability in Juniper Networks Junos OS J-Web on SRX Series devices allows an attacker to cause Denial of Service (DoS) by sending certain crafted HTTP packets. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. When this issue occurs, web-management, NTP daemon (ntpd) and Layer 2 Control Protocol process (L2CPD) daemons might crash. This issue affects Juniper Networks Junos OS on SRX Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2;

On Juniper Networks Junos OS Evolved devices, receipt of a specific IPv6 packet may cause an established IPv6 BGP session to terminate, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue does not affect IPv4 BGP sessions. This issue affects IBGP or EBGP peer sessions with IPv6. This issue affects: Juniper Networks Junos OS Evolved: 19.4 versions prior to 19.4R2-S3-EVO; 20.1 versions prior to 20.1R2-S3-EVO; 20.2 versions prior to 20.2R2-S1-EVO; 20.3 versions prior to 20.3R2-EVO. This issue does not affect Juniper Networks Junos OS releases.

A buffer overflow vulnerability in the TCP/IP stack of Juniper Networks Junos OS allows an attacker to send specific sequences of packets to the device thereby causing a Denial of Service (DoS). By repeatedly sending these sequences of packets to the device, an attacker can sustain the Denial of Service (DoS) condition. The device will abnormally shut down as a result of these sent packets. A potential indicator of compromise will be the following message in the log files: "eventd[13955]: SYSTEM_ABNORMAL_SHUTDOWN: System abnormally shut down" This issue is only triggered by traffic destined to the device. Transit traffic will not trigger this issue. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 17.3 versions prior to 17.3R3-S12; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

An improper interpretation conflict of certain data between certain software components within the Juniper Networks Junos OS devices does not allow certain traffic to pass through the device upon receipt from an ingress interface filtering certain specific types of traffic which is then being redirected to an egress interface on a different VLAN. This causes a Denial of Service (DoS) to those clients sending these particular types of traffic. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious, and can be targeted to the device, or destined through it for the issue to occur. This issues affects IPv4 and IPv6 traffic. An indicator of compromise may be found by checking log files. You may find that traffic on the input interface has 100% of traffic flowing into the device, yet the egress interface shows 0 pps leaving the device. For example: [show interfaces "interface" statistics detail] Output between two interfaces would reveal something similar to: Ingress, first interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/0 Up 9999999999 (9999) 1 (0) -------------------- Egress, second interface: -------------------- Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 0 (0) 9999999999 (0) -------------------- Dropped packets will not show up in DDoS monitoring/protection counters as issue is not caused by anti-DDoS protection mechanisms. This issue affects: Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S7 on NFX250, QFX5K Series, EX4600; 17.4 versions prior to 17.4R2-S11, 17.4R3-S3 on NFX250, QFX5K Series, EX4600; 18.1 versions prior to 18.1R3-S9 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4600; 18.2 versions prior to 18.2R3-S3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600; 18.3 versions prior to 18.3R3-S1 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.2 versions prior to 19.2R1-S5, 19.2R2 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.3 versions prior to 19.3R2-S3, 19.3R3 on NFX250, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series; 19.4 versions prior to 19.4R1-S2, 19.4R2 on NFX250, NFX350, QFX5K Series, EX2300 Series, EX3400 Series, EX4300 Multigigabit, EX4600 Series. This issue does not affect Junos OS releases prior to 17.2R2.

A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.