An Uncontrolled Resource Consumption vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause 100% CPU load and the device to become unresponsive by sending a flood of traffic to the out-of-band management ethernet port. Continued receipted of a flood will create a sustained Denial of Service (DoS) condition. Once the flood subsides the system will recover by itself. An indication that the system is affected by this issue would be that an irq handled by the fman process is shown to be using a high percentage of CPU cycles like in the following example output: user@host> show system processes extensive ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 31 root -84 -187 0K 16K WAIT 22.2H 56939.26% irq96: fman0 This issue affects Juniper Networks Junos OS: All versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

An Uncontrolled Resource Consumption vulnerability in TCP processing on the Routing Engine (RE) of Juniper Networks Junos OS allows an unauthenticated network-based attacker to send crafted TCP packets destined to the device, resulting in an MBUF leak that ultimately leads to a Denial of Service (DoS). The system does not recover automatically and must be manually restarted to restore service. This issue occurs when crafted TCP packets are sent directly to a configured IPv4 or IPv6 interface on the device. Transit traffic will not trigger this issue. MBUF usage can be monitored through the use of the 'show system buffers' command. For example: user@junos> show system buffers | refresh 5 4054/566/4620 mbufs in use (current/cache/total) ... 4089/531/4620 mbufs in use (current/cache/total) ... 4151/589/4740 mbufs in use (current/cache/total) ... 4213/527/4740 mbufs in use (current/cache/total) This issue affects Juniper Networks Junos OS: 12.3 version 12.3R12-S19 and later versions; 15.1 version 15.1R7-S10 and later versions; 17.3 version 17.3R3-S12 and later versions; 18.4 version 18.4R3-S9 and later versions; 19.1 version 19.1R3-S7 and later versions; 19.2 version 19.2R3-S3 and later versions; 19.3 version 19.3R2-S7, 19.3R3-S3 and later versions prior to 19.3R3-S7; 19.4 version 19.4R2-S7, 19.4R3-S5 and later versions prior to 19.4R3-S10; 20.1 version 20.1R3-S1 and later versions; 20.2 version 20.2R3-S2 and later versions prior to 20.2R3-S6; 20.3 version 20.3R3-S1 and later versions prior to 20.3R3-S6; 20.4 version 20.4R2-S2, 20.4R3 and later versions prior to 20.4R3-S5; 21.1 version 21.1R2 and later versions prior to 21.1R3-S4; 21.2 version 21.2R1-S1, 21.2R2 and later versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2-S1, 22.1R3; 22.2 versions prior to 22.2R1-S2, 22.2R2; 22.3 versions prior to 22.3R1-S1, 22.3R2.

An issue was discovered in includes/specials/SpecialMovePage.php in MediaWiki before 1.39.7, 1.40.x before 1.40.3, and 1.41.x before 1.41.1. If a user with the necessary rights to move the page opens Special:MovePage for a page with tens of thousands of subpages, then the page will exceed the maximum request time, leading to a denial of service.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

An attacker could cause a Prometheus denial of service in GitLab 13.7+ by sending an HTTP request with a malformed method

Due to unrestricted access to the Meta Model Repository services in SAP NetWeaver AS Java, attackers can perform DoS attacks on the application, which may prevent legitimate users from accessing it. This can result in no impact on confidentiality and integrity but a high impact on the availability of the application.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make the farm unusable by adding an object to a page with a huge number (e.g. 67108863). Most of the time this will fill the memory allocated to XWiki and make it unusable every time this document is manipulated. This issue has been patched in XWiki 14.0-rc-1.

Knot Resolver before 5.6.0 enables attackers to consume its resources, launching amplification attacks and potentially causing a denial of service. Specifically, a single client query may lead to a hundred TCP connection attempts if a DNS server closes connections without providing a response.

All versions of the package lite-web-server are vulnerable to Denial of Service (DoS) when an attacker sends an HTTP request and includes control characters that the decodeURI() function is unable to parse.

A Missing Authentication for Critical Function vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to easily exhaust available disk resources leading to DoS. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

AnyDesk 7.0.8 allows remote Denial of Service.

Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan.

IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow a remote attacker to cause a denial of service due to an error processing invalid data. IBM X-Force ID: 248418.

An issue in taurusxin ncmdump v1.3.2 allows attackers to cause a Denial of Service (DoS) via memory exhaustion by supplying a crafted .ncm file

Versions of the package sidekiq before 7.1.3 are vulnerable to Denial of Service (DoS) due to insufficient checks in the dashboard-charts.js file. An attacker can exploit this vulnerability by manipulating the localStorage value which will cause excessive polling requests.

BranchCache Denial of Service Vulnerability

An issue discovered in MikroTik Router v6.46.3 and earlier allows attacker to cause denial of service via misconfiguration in the SSH daemon.

notation-go is a collection of libraries for supporting Notation sign, verify, push, and pull of oci artifacts. Prior to version 1.0.0-rc.3, notation-go users will find their application using excessive memory when verifying signatures. The application will be killed, and thus availability is impacted. The problem has been patched in the release v1.0.0-rc.3. Some workarounds are available. Users can review their own trust policy file and check if the identity string contains `=#`. Meanwhile, users should only put trusted certificates in their trust stores referenced by their own trust policy files, and make sure the `authenticity` validation is set to `enforce`.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue. Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process.

Versions of the package libredwg before 0.12.5.6384 are vulnerable to Denial of Service (DoS) due to an out-of-bounds read involving section->num_pages in decode_r2007.c.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients. In client_golang prior to version 1.11.1, HTTP server is susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods. In order to be affected, an instrumented software must use any of `promhttp.InstrumentHandler*` middleware except `RequestsInFlight`; not filter any specific methods (e.g GET) before middleware; pass metric with `method` label name to our middleware; and not have any firewall/LB/proxy that filters away requests with unknown `method`. client_golang version 1.11.1 contains a patch for this issue. Several workarounds are available, including removing the `method` label name from counter/gauge used in the InstrumentHandler; turning off affected promhttp handlers; adding custom middleware before promhttp handler that will sanitize the request method given by Go http.Request; and using a reverse proxy or web application firewall, configured to only allow a limited set of methods.

opentelemetry-go-contrib is a collection of extensions for OpenTelemetry-Go. The v0.38.0 release of `go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp` uses the `httpconv.ServerRequest` function to annotate metric measurements for the `http.server.request_content_length`, `http.server.response_content_length`, and `http.server.duration` instruments. The `ServerRequest` function sets the `http.target` attribute value to be the whole request URI (including the query string)[^1]. The metric instruments do not "forget" previous measurement attributes when `cumulative` temporality is used, this means the cardinality of the measurements allocated is directly correlated with the unique URIs handled. If the query string is constantly random, this will result in a constant increase in memory allocation that can be used in a denial-of-service attack. This issue has been addressed in version 0.39.0. Users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

Windows Remote Desktop Gateway (RD Gateway) Denial of Service Vulnerability

The DNS protocol in RFC 1035 and updates allows remote attackers to cause a denial of service (resource consumption) by arranging for DNS queries to be accumulated for seconds, such that responses are later sent in a pulsing burst (which can be considered traffic amplification in some cases), aka the "DNSBomb" issue.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Microsoft Defender Denial of Service Vulnerability

A vulnerability was found in Moodle where the decompressed size of zip files was not checked against available user quota before unzipping them, which could lead to a denial of service risk. This affects versions 3.9 to 3.9.1, 3.8 to 3.8.4, 3.7 to 3.7.7, 3.5 to 3.5.13 and earlier unsupported versions. Fixed in 3.9.2, 3.8.5, 3.7.8 and 3.5.14.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

An issue was discovered in the Multipart Request Parser in Django 3.2 before 3.2.18, 4.0 before 4.0.10, and 4.1 before 4.1.7. Passing certain inputs (e.g., an excessive number of parts) to multipart forms could result in too many open files or memory exhaustion, and provided a potential vector for a denial-of-service attack.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Dell Enterprise SONiC OS, 3.5.3, 4.0.0, 4.0.1, 4.0.2, contains an "Uncontrolled Resource Consumption vulnerability" in authentication component. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to uncontrolled resource consumption by creating permanent home directories for unauthenticated users.

A denial of service condition exists in the Prometheus server bundled with GitLab affecting all versions from 11.10 to 15.8.5, 15.9 to 15.9.4 and 15.10 to 15.10.1.

On affected platforms running Arista CloudEOS an issue in the Software Forwarding Engine (Sfe) can lead to a potential denial of service attack by sending malformed packets to the switch. This causes a leak of packet buffers and if enough malformed packets are received, the switch may eventually stop forwarding traffic.

HTTP and MIME header parsing can allocate large amounts of memory, even when parsing small inputs, potentially leading to a denial of service. Certain unusual patterns of input data can cause the common function used to parse HTTP and MIME headers to allocate substantially more memory than required to hold the parsed headers. An attacker can exploit this behavior to cause an HTTP server to allocate large amounts of memory from a small request, potentially leading to memory exhaustion and a denial of service. With fix, header parsing now correctly allocates only the memory required to hold parsed headers.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

Discourse is an open source discussion platform. Prior to 3.2.5 and 3.3.0.beta5, crafting requests to submit very long tag group names can reduce the availability of a Discourse instance. This vulnerability is fixed in 3.2.5 and 3.3.0.beta5.

A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

An Insufficient Algorithmic Complexity combined with an Allocation of Resources Without Limits or Throttling vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series and MX Series with SPC3 allows an unauthenticated network attacker to cause latency in transit packet processing and even packet loss. If transit traffic includes a significant percentage (> 5%) of fragmented packets which need to be reassembled, high latency or packet drops might be observed. This issue affects Juniper Networks Junos OS on SRX Series, MX Series with SPC3: All versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2-S9, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2.

cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `>` or `-` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources.

Unspecified vulnerability in Adobe Flash Media Server (FMS) before 3.5.3 allows attackers to cause a denial of service (resource exhaustion) via unknown vectors.

In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.

Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet)

On versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.0 before 15.1.8, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when a BIG-IP Advanced WAF or BIG-IP ASM security policy is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

Mercedes-Benz XENTRY Retail Data Storage 7.8.1 allows remote attackers to cause a denial of service (device restart) via an unauthenticated API request. The attacker must be on the same network as the device.