An issue discovered in sub_4117F8 function in TOTOLINK X6000R V9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the 'lang' parameter.

masterCGI in the Unified Maintenance Tool in Alcatel OmniPCX Enterprise Communication Server R7.1 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the user parameter during a ping action.

Command injection vulnerability in Music Station 5.1.2 and earlier versions in QNAP QTS 4.3.3 and 4.3.4 could allow remote attackers to run arbitrary commands in the compromised application.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_415C80 function.

A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

TOTOlink A3700R v9.1.2u.5822_B20200513 was discovered to contain a remote command execution (RCE) vulnerability via the NTPSyncWithHost function.

Command injection vulnerability in LDAP Server in QNAP QTS 4.2.6 build 20171208, QTS 4.3.3 build 20180402, QTS 4.3.4 build 20180413 and their earlier versions could allow remote attackers to run arbitrary commands or install malware on the NAS.

This command injection vulnerability in File Station allows attackers to execute commands on the affected device. To fix the vulnerability, QNAP recommend updating QTS to their latest versions.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

This command injection vulnerability in Music Station allows attackers to execute commands on the affected device. To fix the vulnerability, QNAP recommend updating Music Station to their latest versions.

OPTILINK OP-XT71000N V2.2 is vulnerable to Remote Code Execution. The issue occurs when the attacker sends an arbitrary code on "/diag_ping_admin.asp" to "PingTest" interface that leads to COMMAND EXECUTION. An attacker can successfully trigger the COMMAND and can compromise full system.

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

In Green Packet DX-350 Firmware version v2.8.9.5-g1.4.8-atheeb, the "PING" (aka tag_ipPing) feature within the web interface allows performing command injection, via the "pip" parameter.

TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to an unauthorized arbitrary command execution in the ‘admuser’ parameter of the setPasswordCfg interface of the cstecgi .cgi.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

This command injection vulnerability in QTS allows attackers to run arbitrary commands in the compromised application. QNAP have already fixed the issue in QTS 4.2.6 build 20170517, QTS 4.3.3.0174 build 20170503 and later versions.

Green Packet WiMax DV-360 2.10.14-g1.0.6.1 devices allow Command Injection, with unauthenticated remote command execution, via a crafted payload to the HTTPS port, because lighttpd listens on all network interfaces (including the external Internet) by default. NOTE: this may overlap CVE-2017-9980.

Barco TransForm NDN-210 Lite, NDN-210 Pro, NDN-211 Lite, and NDN-211 Pro before 3.8 allows Command Injection (issue 1 of 4). The NDN-210 has a web administration panel which is made available over https. The logon method is basic authentication. There is a command injection issue that will result in unauthenticated remote code execution in the username and password fields of the logon prompt. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

TOTOLINK EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanSecDns parameter’ of the setLanConfig interface of the cstecgi .cgi

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.

MajorDoMo (aka Major Domestic Module) before 0662e5e allows command execution via thumb.php shell metacharacters. NOTE: this is unrelated to the Majordomo mailing-list manager.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

The saveObject function in moadmin.php in phpMoAdmin 1.1.2 allows remote attackers to execute arbitrary commands via shell metacharacters in the object parameter.

An issue in craigms/main.php of CraigMS 1.0 allows attackers to execute arbitrary commands via a crafted input entered into the DB Name field.

Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter.

The remove_bad_chars function in utils/cups-browsed.c in cups-filters before 1.0.66 allows remote IPP printers to execute arbitrary commands via consecutive shell metacharacters in the (1) model or (2) PDL. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-2707.

A vulnerability classified as critical was found in TOTOLINK A6000R 1.0.1-B20201211.2000. Affected by this vulnerability is the function apcli_cancel_wps of the file /usr/lib/lua/luci/controller/mtkwifi.lua. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

NETGEAR has released fixes for a pre-authentication command injection in request_handler.php security vulnerability on the following product models: WC7500, running firmware versions prior to 6.5.3.5; WC7520, running firmware versions prior to 2.5.0.46; WC7600v1, running firmware versions prior to 6.5.3.5; WC7600v2, running firmware versions prior to 6.5.3.5; and WC9500, running firmware versions prior to 6.5.3.5.

TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the setRebootScheCfg interface of the cstecgi .cgi.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

This affects all versions of package xopen. The injection point is located in line 14 in index.js in the exported function xopen(filepath)

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

Tenda AX9 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'mac' parameter at /goform/SetOnlineDevName.

An issue in Dut Computer Control Engineering Co.'s PLC MAC1100 allows attackers to execute arbitrary code.

The default configuration in Apache Cassandra 1.2.0 through 1.2.19, 2.0.0 through 2.0.13, and 2.1.0 through 2.1.3 binds an unauthenticated JMX/RMI interface to all network interfaces, which allows remote attackers to execute arbitrary Java code via an RMI request.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the sysScheduleRebootSet function.

osc before 0.151.0 allows remote attackers to execute arbitrary commands via shell metacharacters in a _service file.

An issue in Tneda AX1803 v.1.0.0.1 allows a remote attacker to execute arbitrary code via the adslPwd parameter in the form_fast_setting_internet_set function.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

An issue was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices. Command injection can occur because the system function is used by davinci to unpack language packs without strict filtering of URL strings.

Command injection vulnerability in Helpdesk versions 1.1.21 and earlier in QNAP QTS 4.2.6 build 20180531, QTS 4.3.3 build 20180528, QTS 4.3.4 build 20180528 and their earlier versions could allow remote attackers to run arbitrary commands in the compromised application.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point.

Technicolor Router TD5130 with firmware 2.05.C29GV allows remote attackers to execute arbitrary commands via shell metacharacters in the ping field (setobject_ip parameter).

Command Injection in Simiki v1.6.2.1 and prior allows remote attackers to execute arbitrary system commands via line 64 of the component 'simiki/blob/master/simiki/config.py'.

Openfind MailGates contains a Command Injection flaw, when receiving email with specific strings, malicious code in the mail attachment will be triggered and gain unauthorized access to system files.

default-rsyncssh.lua in Lsyncd 2.1.5 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in a filename.

The wfMangleFlashPolicy function in OutputHandler.php in MediaWiki before 1.19.22, 1.20.x through 1.22.x before 1.22.14, and 1.23.x before 1.23.7 allows remote attackers to conduct PHP object injection attacks via a crafted string containing <cross-domain-policy> in a PHP format request, which causes the string length to change when converting the request to <NOT-cross-domain-policy>.

The fetch_url function in usr.bin/ftp/fetch.c in tnftp, as used in NetBSD 5.1 through 5.1.4, 5.2 through 5.2.2, 6.0 through 6.0.6, and 6.1 through 6.1.5 allows remote attackers to execute arbitrary commands via a | (pipe) character at the end of an HTTP redirect.