In Eclipse BIRT, starting from version 2.6.2, the default configuration allowed to retrieve a report from the same host using an absolute HTTP path for the report parameter (e.g. __report=http://xyz.com/report.rptdesign). If the host indicated in the __report parameter matched the HTTP Host header value, the report would be retrieved. However, the Host header can be tampered with on some configurations where no virtual hosts are put in place (e.g. in the default configuration of Apache Tomcat) or when the default host points to the BIRT server. This vulnerability was patched on Eclipse BIRT 4.13.

Sandbox protection in Jenkins Pipeline: Groovy Plugin 2.78 and earlier can be circumvented through default parameter expressions in CPS-transformed methods.

An issue was discovered in phpMyAdmin 4.8.x before 4.8.2, in which an attacker can include (view and potentially execute) files on the server. The vulnerability comes from a portion of code where pages are redirected and loaded within phpMyAdmin, and an improper test for whitelisted pages. An attacker must be authenticated, except in the "$cfg['AllowArbitraryServer'] = true" case (where an attacker can specify any host he/she is already in control of, and execute arbitrary code on phpMyAdmin) and the "$cfg['ServerDefault'] = 0" case (which bypasses the login requirement and runs the vulnerable code without any authentication).

Code injection via nginx.ingress.kubernetes.io/permanent-redirect annotation.

Ingress nginx annotation injection causes arbitrary command execution.

A flaw was found in RPC request using gfs3_mknod_req supported by glusterfs server. An authenticated attacker could use this flaw to write files to an arbitrary location via path traversal and execute arbitrary code on a glusterfs server node.

The scheduler in HTCondor before 8.2.6 allows remote authenticated users to execute arbitrary code.

Improper Input Validation vulnerability in Apache DolphinScheduler. An authenticated user can cause arbitrary, unsandboxed javascript to be executed on the server.This issue affects Apache DolphinScheduler: until 3.1.9. Users are recommended to upgrade to version 3.1.9, which fixes the issue.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.

H2 1.4.197, as used in Datomic before 0.9.5697 and other products, allows remote code execution because CREATE ALIAS can execute arbitrary Java code. NOTE: the vendor's position is "h2 is not designed to be run outside of a secure environment."

Improper Authentication vulnerability in Pluggabl LLC Booster for WooCommerce allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Booster for WooCommerce: from n/a through 7.1.2.

The ajaxinit function in wpmarketplace/libs/cart.php in the WP Marketplace plugin 2.4.0 for WordPress allows remote authenticated users to create arbitrary users and gain admin privileges via a request to wpmp_pp_ajax_call with an execution target of wp_insert_user.

A flaw was found in Keycloak before version 11.0.0, where the code base contains usages of ObjectInputStream without type checks. This flaw allows an attacker to inject arbitrarily serialized Java Objects, which would then get deserialized in a privileged context and potentially lead to remote code execution.

When handler-router component is enabled in servicecomb-java-chassis, authenticated user may inject some data and cause arbitrary code execution. The problem happens in versions between 2.0.0 ~ 2.1.3 and fixed in Apache ServiceComb-Java-Chassis 2.1.5

The vulnerability allows a remote attacker to access sensitive data inside exported packages or obtain up to Remote Code Execution (RCE) with root privileges on the device. The vulnerability can be exploited directly by authenticated users, via crafted HTTP requests, or indirectly by unauthenticated users, by accessing already-exported backup packages, or crafting an import package and inducing an authenticated victim into sending the HTTP upload request.

A Code Execution vulnerability exists in Android prior to 4.4.0 related to the addJavascriptInterface method and the accessibility and accessibilityTraversal objects, which could let a remote malicious user execute arbitrary code.

Status2k allows Remote Command Execution in admin/options/editpl.php.

** UNSUPPORTED WHEN ASSIGNED **An improper authentication vulnerability [CWE-287] in Fortinet FortiWAN version 5.2.0 through 5.2.1 and version 5.1.1 through 5.1.2 may allow an authenticated attacker to escalate his privileges via HTTP or HTTPs requests with crafted JWT token values.

Improper Input Validation vulnerability in OpenText AppBuilder on Windows, Linux allows OS Command Injection. The AppBuilder's Scheduler functionality that facilitates creation of scheduled tasks is vulnerable to command injection. This allows authenticated users to inject arbitrary operating system commands into the executing process. This issue affects AppBuilder: from 21.2 before 23.2.

In TYPO3 CMS greater than or equal to 9.0.0 and less than 9.5.20, and greater than or equal to 10.0.0 and less than 10.4.6, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. This allows to inject arbitrary data having a valid cryptographic message authentication code (HMAC-SHA1) and can lead to various attack chains including potential privilege escalation, insecure deserialization & remote code execution. The overall severity of this vulnerability is high based on mentioned attack chains and the requirement of having a valid backend user session (authenticated). This has been patched in versions 9.5.20 and 10.4.6.

A vulnerability was found in Ruijie RG-EW1200G 07161417 r483. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/sys/login. The manipulation leads to improper authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-237518 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the input parameter handling of HCL Client Application Access v9 could potentially be exploited by an authenticated attacker resulting in a stack buffer overflow. This could allow the attacker to crash the program or inject code into the system which would execute with the privileges of the currently logged in user.

Certain Zyxel products have a locally accessible binary that allows a non-root user to generate a password for an undocumented user account that can be used for a TELNET session as root. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0.

Improper authorization in Microsoft Partner Center allows an authorized attacker to elevate privileges over a network.

Improper input validation in the Intel(R) Data Center Manager Console before version 3.6.2 may allow an authenticated user to potentially enable escalation of privilege via network access.

A security issue was discovered in Kubernetes where a user may be able to create a container with subpath volume mounts to access files & directories outside of the volume, including on the host filesystem.

Improper authorization in some Zoom clients may allow an authorized user to conduct an escalation of privilege via network access.

core/get_menudiv.php in Dolibarr before 11.0.4 allows remote authenticated attackers to bypass intended access restrictions via a non-alphanumeric menu parameter.

The HomeAutomationGateway service in MiCasaVerde VeraLite with firmware 1.5.408 allows (1) remote attackers to execute arbitrary Lua code via a RunLua action in a request to upnp/control/hag on port 49451 or (2) remote authenticated users to execute arbitrary Lua code via a RunLua action in a request to port_49451/upnp/control/hag.

Improper input validation in Dolibarr ERP CRM <= v18.0.1 fails to strip certain PHP code from user-supplied input when creating a Website, allowing an attacker to inject and evaluate arbitrary PHP code.

A vulnerability was found in aizuda snail-job 1.4.0. It has been classified as critical. Affected is the function getRuntime of the file /snail-job/workflow/check-node-expression of the component Workflow-Task Management Module. The manipulation of the argument nodeExpression leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Dell ECS version 3.8.1.4 and prior contain an Improper Input Validation vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Code execution.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka 'Microsoft Exchange Memory Corruption Vulnerability'.

In Tenda AC23 v16.03.07.45_cn, the formSetIPv6status and formGetWanParameter functions do not authenticate user input parameters, resulting in a post-authentication stack overflow vulnerability.

The RSA Identity Governance and Lifecycle software and RSA Via Lifecycle and Governance products prior to 7.1.0 P08 contain a SQL Injection vulnerability in Workflow Architect. A remote authenticated malicious user could potentially exploit this vulnerability to execute SQL commands on the back-end database to gain unauthorized access to the data by supplying specially crafted input data to the affected application.

A security issue was discovered in ingress-nginx https://github.com/kubernetes/ingress-nginx where the `auth-url` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.)

An authentication issue was addressed with improved state management. This issue is fixed in macOS Mojave 10.14.5. A user may be unexpectedly logged in to another user’s account.

The sub_451784 function does not validate the parameters entered by the user, resulting in a stack overflow vulnerability in Tenda AC23 v16.03.07.45_cn

The compare_parentcontrol_time function does not authenticate user input parameters, resulting in a post-authentication stack overflow vulnerability in Tenda AC23 v16.03.07.45_cn.

Cacti is an open source operational monitoring and fault management framework. A defect in the sql_save function was discovered. When the column type is numeric, the sql_save function directly utilizes user input. Many files and functions calling the sql_save function do not perform prior validation of user input, leading to the existence of multiple SQL injection vulnerabilities in Cacti. This allows authenticated users to exploit these SQL injection vulnerabilities to perform privilege escalation and remote code execution. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Improper authentication vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.

A security issue was discovered in Kubernetes where a user that can create pods on Windows nodes may be able to escalate to admin privileges on those nodes. Kubernetes clusters are only affected if they include Windows nodes.

Reported in SOLR-14515 (private) and fixed in SOLR-14561 (public), released in Solr version 8.6.0. The Replication handler (https://lucene.apache.org/solr/guide/8_6/index-replication.html#http-api-commands-for-the-replicationhandler) allows commands backup, restore and deleteBackup. Each of these take a location parameter, which was not validated, i.e you could read/write to any location the solr user can access.

Use of unsafe yaml load. Allows instantiation of arbitrary objects. The flaw itself is caused by an unsafe parsing of YAML values which happens whenever an action message is processed to be sent, and allows for the creation of Python objects. Through this flaw in the ROS core package of actionlib, an attacker with local or remote access can make the ROS Master, execute arbitrary code in Python form. Consider yaml.safe_load() instead. Located first in actionlib/tools/library.py:132. See links for more info on the bug.

A authentication bypass vulnerability exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.10 in the Salesforce login integration that could be used by an attacker to create an account that bypassed domain restrictions and email verification requirements.

ASP.NET Elevation of Privilege Vulnerability

If a TLS 1.3 client gets neither a PSK (pre shared key) extension nor a KSE (key share extension) when connecting to a malicious server, a default predictable buffer gets used for the IKM (Input Keying Material) value when generating the session master secret. Using a potentially known IKM value when generating the session master secret key compromises the key generated, allowing an eavesdropper to reconstruct it and potentially allowing access to or meddling with message contents in the session. This issue does not affect client validation of connected servers, nor expose private key information, but could result in an insecure TLS 1.3 session when not controlling both sides of the connection. wolfSSL recommends that TLS 1.3 client side users update the version of wolfSSL used. 

A security issue was discovered in Kubernetes where a user that can create pods on Windows nodes may be able to escalate to admin privileges on those nodes. Kubernetes clusters are only affected if they include Windows nodes.