The authentication mechanism can be bypassed by overflowing the value of the Cookie "authentication" field, provided there is an active user session.
Out-of-bounds Write vulnerability in mod_sed of Apache HTTP Server allows an attacker to overwrite heap memory with possibly attacker provided data. This issue affects Apache HTTP Server 2.4 version 2.4.52 and prior versions.
Git is distributed revision control system. gitattributes are a mechanism to allow defining attributes for paths. These attributes can be defined by adding a `.gitattributes` file to the repository, which contains a set of file patterns and the attributes that should be set for paths matching this pattern. When parsing gitattributes, multiple integer overflows can occur when there is a huge number of path patterns, a huge number of attributes for a single pattern, or when the declared attribute names are huge. These overflows can be triggered via a crafted `.gitattributes` file that may be part of the commit history. Git silently splits lines longer than 2KB when parsing gitattributes from a file, but not when parsing them from the index. Consequentially, the failure mode depends on whether the file exists in the working tree, the index or both. This integer overflow can result in arbitrary heap reads and writes, which may result in remote code execution. The problem has been patched in the versions published on 2023-01-17, going back to v2.30.7. Users are advised to upgrade. There are no known workarounds for this issue.
Integer overflow may occur if atom size is less than atom offset as there is improper validation of atom size in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8053, APQ8096AU, APQ8098, Kamorta, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909W, MSM8917, MSM8953, MSM8996AU, MSM8998, QCA6574AU, QCM2150, QCS405, QCS605, QM215, Rennell, SA6155P, Saipan, SDA660, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR2130
An issue was discovered in Wind River VxWorks 7. The memory allocator has a possible integer overflow in calculating a memory block's size to be allocated by calloc(). As a result, the actual memory allocated is smaller than the buffer size specified by the arguments, leading to memory corruption.
In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.
Integer overflow conditions that exist in Trend Micro ServerProtect 6.0/5.8 Information Server could allow a remote attacker to crash the process or achieve remote code execution.
A heap-based buffer overflow vulnerability exists in the comment functionality of stb _vorbis.c v1.22. A specially crafted .ogg file can lead to an out-of-bounds write. An attacker can provide a malicious file to trigger this vulnerability.
Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In affected versions, the return of `<iface>.returns_int128()` is not validated to fall within the bounds of `int128`. This issue can result in a misinterpretation of the integer value and lead to incorrect behavior. As of v0.3.0, `<iface>.returns_int128()` is validated in simple expressions, but not complex expressions. Users are advised to upgrade. There is no known workaround for this issue.
In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.
Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.
An issue was discovered in ReadyTalk Avian 1.2.0 before 2020-10-27. The FileOutputStream.write() method in FileOutputStream.java has a boundary check to prevent out-of-bounds memory read/write operations. However, an integer overflow leads to bypassing this check and achieving the out-of-bounds access. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
A CWE-190: Integer Overflow or Wraparound vulnerability exists that could cause heap-based buffer overflow, leading to denial of service and potentially remote code execution when an attacker sends multiple specially crafted messages. Affected Product: Interactive Graphical SCADA System Data Server (V15.0.0.22020 and prior)
Exim 4 before 4.92 allows Integer Overflow to Buffer Overflow, in which an unauthenticated remote attacker can execute arbitrary code by leveraging the mishandling of continuation lines during header-length restriction.
A CWE-190: Integer Overflow or Wraparound vulnerability exists that could cause heap-based buffer overflow, leading to denial of service and potentially remote code execution when an attacker sends multiple specially crafted messages. Affected Products: IGSS Data Server - IGSSdataServer.exe (Versions prior to V15.0.0.22073)
MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product. NOTE: pyminizip through 0.2.6 is also vulnerable because it bundles an affected zlib version, and exposes the applicable MiniZip code through its compress API.
xrdp is an open source project which provides a graphical login to remote machines using Microsoft Remote Desktop Protocol (RDP). xrdp < v0.9.21 contain a Integer Overflow in xrdp_mm_process_rail_update_window_text() function. There are no known workarounds for this issue. Users are advised to upgrade.
Tensorflow is an Open Source Machine Learning Framework. Under certain scenarios, Grappler component of TensorFlow is vulnerable to an integer overflow during cost estimation for crop and resize. Since the cropping parameters are user controlled, a malicious person can trigger undefined behavior. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.
build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.
addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.
An integer overflow vulnerability exists in the GDF parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted GDF file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
An integer overflow vulnerability exists in the ABF parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted ABF file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
Exim 4 before 4.94.2 allows Integer Overflow to Buffer Overflow in receive_add_recipient via an e-mail message with fifty million recipients. NOTE: remote exploitation may be difficult because of resource consumption.
defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.
Memory corruption in bluetooth due to integer overflow while processing HFP-UNIT profile in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Mobile, Snapdragon Voice & Music
NGINX before 1.13.6 has a buffer overflow for years that exceed four digits, as demonstrated by a file with a modification date in 1969 that causes an integer overflow (or a false modification date far in the future), when encountered by the autoindex module.
In parseTrackFragmentRun() of MPEG4Extractor.cpp, there is a possible out of bounds read due to an integer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-232242894
Integer overflow vulnerability in function Jsi_ObjArraySizer in jsish before 3.0.8, allows remote attackers to execute arbitrary code.
Integer Overflow or Wraparound in GitHub repository publify/publify prior to 9.2.10.
Floodlight through 1.2 has an integer overflow in checkFlow in StaticFlowEntryPusherResource.java via priority or port number.
CGI.escape_html in Ruby before 2.7.5 and 3.x before 3.0.3 has an integer overflow and resultant buffer overflow via a long string on platforms (such as Windows) where size_t and long have different numbers of bytes. This also affects the CGI gem before 0.3.1 for Ruby.
Integer overflow vulnerability in payable function of a smart contract implementation for an Ethereum token, as demonstrated by the smart contract implemented at address 0xB49E984A83d7A638E7F2889fc8328952BA951AbE, an implementation for MillionCoin (MON).
An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.
Integer Overflow or Wraparound vulnerability in the XML RPC library of OpenRobotics ros_comm communications packages allows unauthenticated network traffic to cause unexpected behavior. This issue affects: OpenRobotics ros_comm communications packages Noetic and prior versions. Fixed in https://github.com/ros/ros_comm/pull/2065.
PlutoSVG commit 336c02997277a1888e6ccbbbe674551a0582e5c4 and before was discovered to contain an integer overflow via the component plutosvg_load_from_memory.
Certain D-Link, Edimax, NETGEAR, TP-Link, Tenda, and Western Digital devices are affected by an integer overflow by an unauthenticated attacker. Remote code execution from the WAN interface (TCP port 20005) cannot be ruled out; however, exploitability was judged to be of "rather significant complexity" but not "impossible." The overflow is in SoftwareBus_dispatchNormalEPMsgOut in the KCodes NetUSB kernel module. Affected NETGEAR devices are D7800 before 1.0.1.68, R6400v2 before 1.0.4.122, and R6700v3 before 1.0.4.122.
A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i800NC, RUGGEDCOM i801, RUGGEDCOM i801NC, RUGGEDCOM i802, RUGGEDCOM i802NC, RUGGEDCOM i803, RUGGEDCOM i803NC, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2100NC, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M2200NC, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM M969NC, RUGGEDCOM RMC30, RUGGEDCOM RMC30NC, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RMC8388NC V4.X, RUGGEDCOM RMC8388NC V5.X, RUGGEDCOM RP110, RUGGEDCOM RP110NC, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600FNC, RUGGEDCOM RS1600NC, RUGGEDCOM RS1600T, RUGGEDCOM RS1600TNC, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS400NC, RUGGEDCOM RS401, RUGGEDCOM RS401NC, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416NC, RUGGEDCOM RS416NCv2 V4.X, RUGGEDCOM RS416NCv2 V5.X, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416PNC, RUGGEDCOM RS416PNCv2 V4.X, RUGGEDCOM RS416PNCv2 V5.X, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000ANC, RUGGEDCOM RS8000H, RUGGEDCOM RS8000HNC, RUGGEDCOM RS8000NC, RUGGEDCOM RS8000T, RUGGEDCOM RS8000TNC, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GNC, RUGGEDCOM RS900GNC(32M) V4.X, RUGGEDCOM RS900GNC(32M) V5.X, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900GPNC, RUGGEDCOM RS900L, RUGGEDCOM RS900LNC, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900MNC-GETS-C01, RUGGEDCOM RS900MNC-GETS-XX, RUGGEDCOM RS900MNC-STND-XX, RUGGEDCOM RS900MNC-STND-XX-C01, RUGGEDCOM RS900NC, RUGGEDCOM RS900NC(32M) V4.X, RUGGEDCOM RS900NC(32M) V5.X, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910LNC, RUGGEDCOM RS910NC, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920LNC, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930LNC, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS940GNC, RUGGEDCOM RS969, RUGGEDCOM RS969NC, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100NC, RUGGEDCOM RSG2100NC(32M) V4.X, RUGGEDCOM RSG2100NC(32M) V5.X, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2100PNC, RUGGEDCOM RSG2100PNC (32M) V4.X, RUGGEDCOM RSG2100PNC (32M) V5.X, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2200NC, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2288NC V4.X, RUGGEDCOM RSG2288NC V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300NC V4.X, RUGGEDCOM RSG2300NC V5.X, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2300PNC V4.X, RUGGEDCOM RSG2300PNC V5.X, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG2488NC V4.X, RUGGEDCOM RSG2488NC V5.X, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSG920PNC V4.X, RUGGEDCOM RSG920PNC V5.X, RUGGEDCOM RSL910, RUGGEDCOM RSL910NC, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. Within a third-party component, the process to allocate partition size fails to check memory boundaries. Therefore, if a large amount is requested by an attacker, due to an integer-wrap around, it could result in a small size being allocated instead.
A code execution vulnerability exists in the WS-Addressing plugin functionality of Genivia gSOAP 2.8.107. A specially crafted SOAP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability.
In nDPI through 3.2 Stable, the SSH protocol dissector has multiple KEXINIT integer overflows that result in a controlled remote heap overflow in concat_hash_string in ssh.c. Due to the granular nature of the overflow primitive and the ability to control both the contents and layout of the nDPI library's heap memory through remote input, this vulnerability may be abused to achieve full Remote Code Execution against any network inspection stack that is linked against nDPI and uses it to perform network traffic analysis.
SecureCRT before 8.7.2 allows remote attackers to execute arbitrary code via an Integer Overflow and a Buffer Overflow because a banner can trigger a line number to CSI functions that exceeds INT_MAX.
An integer overflow was present in `OrderedHashTable` used by the JavaScript engine This vulnerability affects Firefox < 139.0.4.
A vulnerability was found in SerenityOS. It has been rated as critical. Affected by this issue is the function initialize_typed_array_from_array_buffer in the library Userland/Libraries/LibJS/Runtime/TypedArray.cpp. The manipulation leads to integer overflow. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as f6c6047e49f1517778f5565681fb64750b14bf60. It is recommended to apply a patch to fix this issue. VDB-222074 is the identifier assigned to this vulnerability.
Memory corruption while processing crafted SDES packets due to improper length check in sdes packets recieved in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
Heap-based buffer overflow in the CreateDIBPatternBrushPt function in GDI in Microsoft Windows 2000 SP4, XP SP2, Server 2003 SP1 and SP2, Vista, and Server 2008 allows remote attackers to execute arbitrary code via an EMF or WMF image file with a malformed header that triggers an integer overflow, aka "GDI Heap Overflow Vulnerability."
Stack-based buffer overflow in libpixman, as used in Pale Moon before 15.4 and possibly other products, has unspecified impact and context-dependent attack vectors. NOTE: this issue might be resultant from an integer overflow in the fast_composite_scaled_bilinear function in pixman-inlines.h, which triggers an infinite loop.
An integer overflow can be triggered in SQLite’s `concat_ws()` function. The resulting, truncated integer is then used to allocate a buffer. When SQLite then writes the resulting string to the buffer, it uses the original, untruncated size and thus a wild Heap Buffer overflow of size ~4GB can be triggered. This can result in arbitrary code execution.
In Eclipse Jetty, versions 9.2.x and older, 9.3.x (all configurations), and 9.4.x (non-default configuration with RFC2616 compliance enabled), transfer-encoding chunks are handled poorly. The chunk length parsing was vulnerable to an integer overflow. Thus a large chunk size could be interpreted as a smaller chunk size and content sent as chunk body could be interpreted as a pipelined request. If Jetty was deployed behind an intermediary that imposed some authorization and that intermediary allowed arbitrarily large chunks to be passed on unchanged, then this flaw could be used to bypass the authorization imposed by the intermediary as the fake pipelined request would not be interpreted by the intermediary as a request.
Buffer over read can happen in video driver when playing clip with atomsize having value UINT32_MAX in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
Integer overflow in the decode_digit function in puny_decode.c in Libidn2 before 2.0.4 allows remote attackers to cause a denial of service or possibly have unspecified other impact.
When parsing a file that is submitted to the DPDecoder service as a job, the service will use the combination of decoding parameters that were submitted with the job along with fields that were parsed for the submitted video by the R3D SDK to calculate the size of a heap buffer. Due to an integer overflow with regards to this calculation, this can result in an undersized heap buffer being allocated. When this heap buffer is written to, a heap-based buffer overflow will occur. This can result in code execution under the context of the application.