An issue in Open Networking Foundations sdran-in-a-box v.1.4.3 and onos-a1t v.0.2.3 allows a remote attacker to cause a denial of service via the onos-a1t component of the sdran-in-a-box, specifically the DeleteWatcher function.

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab Webhook feature could be abused to perform denial of service attacks due to the lack of rate limitation.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In specific cases the state of TCP sessions that are terminated is not cleared, which over time leads to an exhaustion of resources, preventing new connections to the control plane from being established. A continuously increasing number of connections shown by: user@host > show system connections is indicative of the problem. To recover the respective RE needs to be restarted manually. This issue only affects IPv4 but does not affect IPv6. This issue only affects TCP sessions established in-band (over an interface on an FPC) but not out-of-band (over the management ethernet port on the routing-engine). This issue affects Junos OS Evolved:  * All versions before 21.4R3-S9-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.4 version before 22.4R3-S3-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R2-EVO.

An issue in aedes v0.51.2 allows attackers to cause a Denial of Service(DoS) via a crafted request. NOTE: the Supplier indicates that exploitation cannot occur because of the protection mechanism in the validateTopic function in lib/utils.js.

An allocation of resources without limits or throttling vulnerability [CWE-770] in FortiOS versions 7.4.0 through 7.4.4, versions 7.2.0 through 7.2.8, versions 7.0.0 through 7.0.15, and versions 6.4.0 through 6.4.15 may allow an unauthenticated remote user to consume all system memory via multiple large file uploads.

A allocation of resources without limits or throttling in Fortinet FortiSIEM 5.3 all versions, 5.4 all versions, 6.x all versions, 7.0 all versions, and 7.1.0 through 7.1.5 may allow an attacker to deny valid TLS traffic via consuming all allotted connections.

The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

A memory allocation issue in vernemq v2.0.1 allows attackers to cause a Denial of Service (DoS) via excessive memory consumption.

IBM Safer Payments 6.4.0.00 through 6.4.2.07, 6.5.0.00 through 6.5.0.05, and 6.6.0.00 through 6.6.0.03 could allow a remote attacker to cause a denial of service due to improper allocation of resources.

Windows Hyper-V Denial of Service Vulnerability

IBM TXSeries for Multiplatforms 10.1 could allow a remote attacker to cause a denial of service using persistent connections due to improper allocation of resources.

In BIG-IP tenants running on r2000 and r4000 series hardware, or BIG-IP Virtual Edition (VEs) using Intel E810 SR-IOV NIC, undisclosed traffic can cause an increase in memory resource utilization.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make XWiki create many new schemas and fill them with tables just by using a crafted user identifier in the login form. This may lead to degraded database performance. The problem has been patched in XWiki 13.10.8, 14.6RC1 and 14.4.2. Users are advised to upgrade. There are no known workarounds for this issue.

An excessive memory use issue (CWE-770) exists in Email-MIME, before version 1.954, which can cause denial of service when parsing multipart MIME messages. The patch set (from 2020 and 2024) limits excessive depth and the total number of parts.

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume all available memory. IBM X-Force ID: 172125.

Bitcoin Core before 24.0.1 allows remote attackers to cause a denial of service (daemon crash) via a flood of low-difficulty header chains (aka a "Chain Width Expansion" attack) because a node does not first verify that a presented chain has enough work before committing to store it.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3.

A Memory Allocation with Excessive Size Value vulnerablity in the TEE_Realloc function in Samsung mTower through 0.3.0 allows a trusted application to trigger a Denial of Service (DoS) by invoking the function TEE_Realloc with an excessive number for the parameter len.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.13 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.35 through 8.5.100 and 7.0.92 through 7.0.109. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25, or 9.0.90, which fixes the issue. Apache Tomcat, under certain configurations on any platform, allows an attacker to cause an OutOfMemoryError by abusing the TLS handshake process.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Suricata can run out of memory when parsing crafted HTTP/2 traffic. Upgrade to 6.0.20 or 7.0.6.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

An issue was discovered in libexif before 0.6.22. An unrestricted size in handling Canon EXIF MakerNote data could lead to consumption of large amounts of compute time for decoding EXIF data.

gorilla/schema converts structs to and from form values. Prior to version 1.4.1 Running `schema.Decoder.Decode()` on a struct that has a field of type `[]struct{...}` opens it up to malicious attacks regarding memory allocations, taking advantage of the sparse slice functionality. Any use of `schema.Decoder.Decode()` on a struct with arrays of other structs could be vulnerable to this memory exhaustion vulnerability. Version 1.4.1 contains a patch for the issue.

Similarly to CVE-2024-34055, Apache James is vulnerable to denial of service through the abuse of IMAP literals from both authenticated and unauthenticated users, which could be used to cause unbounded memory allocation and very long computations Version 3.7.6 and 3.8.2 restrict such illegitimate use of IMAP literals.

In lunary-ai/lunary version 1.2.7, there is a lack of rate limiting on the forgot password page, leading to an email bombing vulnerability. Attackers can exploit this by automating forgot password requests to flood targeted user accounts with a high volume of password reset emails. This not only overwhelms the victim's mailbox, making it difficult to manage and locate legitimate emails, but also significantly impacts mail servers by consuming their resources. The increased load can cause performance degradation and, in severe cases, make the mail servers unresponsive or unavailable, disrupting email services for the entire organization.

Uncontrolled resource consumption refers to a software vulnerability where a attacker or system uses excessive resources, such as CPU, memory, or network bandwidth, without proper limitations or controls. This can cause a denial-of-service (DoS) attack or degrade the performance of the affected system.

TEE_Malloc in Samsung mTower through 0.3.0 allows a trusted application to achieve Excessive Memory Allocation via a large len value, as demonstrated by a Numaker-PFM-M2351 TEE kernel crash.

Bitcoin Core before 25.0 allows remote attackers to cause a denial of service (blocktxn message-handling assertion and node exit) by including transactions in a blocktxn message that are not committed to in a block's merkle root. FillBlock can be called twice for one PartiallyDownloadedBlock instance.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue.

encoded_id-rails versions before 1.0.0.beta2 are affected by an uncontrolled resource consumption vulnerability. A remote and unauthenticated attacker might cause a denial of service condition by sending an HTTP request with an extremely long "id" parameter.

Affected devices do not properly handle the renegotiation of SSL/TLS parameters. This could allow an unauthenticated remote attacker to bypass the TCP brute force prevention and lead to a denial of service condition for the duration of the attack.

Rust-WebSocket is a WebSocket (RFC6455) library written in Rust. In versions prior to 0.26.5 untrusted websocket connections can cause an out-of-memory (OOM) process abort in a client or a server. The root cause of the issue is during dataframe parsing. Affected versions would allocate a buffer based on the declared dataframe size, which may come from an untrusted source. When `Vec::with_capacity` fails to allocate, the default Rust allocator will abort the current process, killing all threads. This affects only sync (non-Tokio) implementation. Async version also does not limit memory, but does not use `with_capacity`, so DoS can happen only when bytes for oversized dataframe or message actually got delivered by the attacker. The crashes are fixed in version 0.26.5 by imposing default dataframe size limits. Affected users are advised to update to this version. Users unable to upgrade are advised to filter websocket traffic externally or to only accept trusted traffic.

TYPO3 is an open source PHP based web content management system released under the GNU GPL. In affected versions requesting invalid or non-existing resources via HTTP triggers the page error handler which again could retrieve content to be shown as an error message from another page. This leads to a scenario in which the application is calling itself recursively - amplifying the impact of the initial attack until the limits of the web server are exceeded. Users are advised to update to TYPO3 version 11.5.16 to resolve this issue. There are no known workarounds for this issue.

It is possible to provide data to be read that leads the reader to loop in cycles endlessly, consuming CPU. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue.

A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue.

A security vulnerability has been identified in Apache Kafka. It affects all releases since 2.8.0. The vulnerability allows malicious unauthenticated clients to allocate large amounts of memory on brokers. This can lead to brokers hitting OutOfMemoryException and causing denial of service. Example scenarios: - Kafka cluster without authentication: Any clients able to establish a network connection to a broker can trigger the issue. - Kafka cluster with SASL authentication: Any clients able to establish a network connection to a broker, without the need for valid SASL credentials, can trigger the issue. - Kafka cluster with TLS authentication: Only clients able to successfully authenticate via TLS can trigger the issue. We advise the users to upgrade the Kafka installations to one of the 3.2.3, 3.1.2, 3.0.2, 2.8.2 versions.

Dell PowerScale OneFS, versions 8.2.0.x-9.4.0.x contain allocation of Resources Without Limits or Throttling vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service and performance issue on that node.

OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. A handler wrapper out of the box adds labels `http.user_agent` and `http.method` that have unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent to it. HTTP header User-Agent or HTTP method for requests can be easily set by an attacker to be random and long. The library internally uses `httpconv.ServerRequest` that records every value for HTTP `method` and `User-Agent`. In order to be affected, a program has to use the `otelhttp.NewHandler` wrapper and not filter any unknown HTTP methods or User agents on the level of CDN, LB, previous middleware, etc. Version 0.44.0 fixed this issue when the values collected for attribute `http.request.method` were changed to be restricted to a set of well-known values and other high cardinality attributes were removed. As a workaround to stop being affected, `otelhttp.WithFilter()` can be used, but it requires manual careful configuration to not log certain requests entirely. For convenience and safe usage of this library, it should by default mark with the label `unknown` non-standard HTTP methods and User agents to show that such requests were made but do not increase cardinality. In case someone wants to stay with the current behavior, library API should allow to enable it.

A denial of service vulnerability was identified in GitLab CE/EE, affecting all versions from 15.11 prior to 16.6.7, 16.7 prior to 16.7.5 and 16.8 prior to 16.8.2 which allows an attacker to spike the GitLab instance resource usage resulting in service degradation.

A possibility of unwanted server memory consumption was detected through the obsolete functionalities in the Rest API methods of the M-Files server before 23.11.13156.0 which allows attackers to execute DoS attacks.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.5.0a3.