A security vulnerability has been detected in Wavlink NU516U1 240425. Impacted is the function advance of the file /cgi-bin/wireless.cgi. Such manipulation of the argument wlan_conf/Channel/skiplist/ieee_80211h leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure.

Improper Neutralization of Special Elements used in an OS Command vulnerability allows OS Command Injection via Network Report. This issue affects Pandora FMS: from 777 through 800

Improper Neutralization of Special Elements used in an OS Command vulnerability allows OS Command Injection via WebServerModuleDebug. This issue affects Pandora FMS: from 777 through 800

A vulnerability was found in Intelbras TIP 635G 1.12.3.5. This vulnerability affects unknown code of the component Ping Handler. The manipulation results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by modifying malicious input injected into the MBird SMS service URL and/or code via the utility route which is later processed during system setup, leading to remote code execution.

A vulnerability was detected in Wavlink NU516U1 240425. The affected element is the function WifiBasic of the file /cgi-bin/wireless.cgi. Performing a manipulation of the argument AuthMethod/EncrypType results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure.

An OS Command Injection vulnerability exists in the web-based Traceroute diagnostic utility of International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver Web Management Interface version 101. An authenticated attacker can inject arbitrary shell metacharacters (such as the pipe `|` operator) into the flags parameter, leading to the execution of arbitrary operating system commands with root privileges.

FreePBX is an open source IP PBX. From versions 16.0.17.2 to before 16.0.20 and from version 17.0.2.4 to before 17.0.5, multiple command injection vulnerabilities exist in the recordings module. This issue has been patched in versions 16.0.20 and 17.0.5.

The web-based Ping diagnostic utility (/IDC_Ping/main.cgi) in International Datacasting Corporation (IDC) SFX Series SuperFlex Satellite  Receiver Web Management Interface version 101 is vulnerable to OS Command Injection. The application insecurely parses the `IPaddr` parameter. An authenticated attacker can bypass server-side semicolon exclusion checks by using alternate shell metacharacters (such as the pipe `|` operator) to append and execute arbitrary shell commands with root privileges.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiADC version 7.0.0 through 7.0.2, FortiADC version 6.2.0 through 6.2.3, FortiADC version version 6.1.0 through 6.1.6, FortiADC version 6.0.0 through 6.0.4, FortiADC version 5.4.0 through 5.4.5 may allow an attacker to execute unauthorized code or commands via specifically crafted HTTP requests.

RAGFlow is an open-source RAG (Retrieval-Augmented Generation) engine. In versions 0.24.0 and prior, a Server-Side Template Injection (SSTI) vulnerability exists in RAGFlow's Agent workflow Text Processing (StringTransform) and Message components. These components use Python's jinja2.Template (unsandboxed) to render user-supplied templates, allowing any authenticated user to execute arbitrary operating system commands on the server. At time of publication, there are no publicly available patches.

OpenClaw versions prior to 2026.2.22 contain an allowlist bypass vulnerability in system.run that allows attackers to execute non-allowlisted commands by splitting command substitution using shell line-continuation characters. Attackers can bypass security analysis by injecting $\\ followed by a newline and opening parenthesis inside double quotes, causing the shell to fold the line continuation into executable command substitution that circumvents approval boundaries.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 9.0 version 9.0.10 through PAN-OS 9.0.14; PAN-OS 9.1 version 9.1.4 through PAN-OS 9.1.10; PAN-OS 10.0 version 10.0.7 and earlier PAN-OS 10.0 versions; PAN-OS 10.1 version 10.1.0 through PAN-OS 10.1.1. Prisma Access firewalls and firewalls running PAN-OS 8.1 versions are not impacted by this issue.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.3, a command injection vulnerability exists in the `/config/compare/<service>/<server_ip>/show` endpoint, allowed authenticated users to execute arbitrary system commands on the app host. The vulnerability exists in `app/modules/config/config.py` on line 362, where user input is directly formatted in the template string that is eventually executed. Version 8.2.6.3 fixes the issue.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator with permissions to use XML API the ability to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. This issue does not impact Prisma Access firewalls.

Authenticated user can upload a malicious file to the server and execute it, which leads to remote code execution.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in FortiSOAR IMAP connector version 3.5.7 and below may allow an authenticated attacker to execute unauthorized code or commands via a specifically crafted playbook

OpenClaw versions prior to 2026.2.22 contain an allowlist bypass vulnerability in system.run exec analysis that fails to unwrap env and shell-dispatch wrapper chains. Attackers can route execution through wrapper binaries like env bash to smuggle payloads that satisfy allowlist entries while executing non-allowlisted commands.

HKUDS OpenHarness contains a remote code execution vulnerability in the /bridge slash command that allows remote senders accepted by configuration to execute arbitrary operating system commands. Attackers can invoke the /bridge spawn command with attacker-controlled command text that is forwarded to the bridge session manager and executed through the shared shell subprocess helper, allowing them to spawn shell sessions as the OpenHarness process user and access local files, credentials, workspace state, and repository contents.

Manyfold is an open source, self-hosted web application for managing a collection of 3d models, particularly focused on 3d printing. Prior to version 0.133.0, when model render generation is enabled, a logged-in user can achieve RCE by uploading a ZIP containing a file with a shell metacharacter in its name. The filename reaches a Ruby backtick call unsanitized. Version 0.133.0 fixes the issue.

applications/luci-app-ddns/luasrc/model/cbi/ddns/detail.lua in the DDNS package for OpenWrt 19.07 allows remote authenticated users to inject arbitrary commands via POST requests.

Tenda G300-F router firmware version 16.01.14.2 and prior contain an OS command injection vulnerability in the WAN diagnostic functionality (formSetWanDiag). The implementation constructs a shell command that invokes curl and incorporates attacker-controlled input into the command line without adequate neutralization. As a result, a remote attacker with access to the affected management interface can inject additional shell syntax and execute arbitrary commands on the device with the privileges of the management process.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the restore route.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the Wi-Fi SSID and/or password fields can lead to remote code execution when the configuration is processed.

The api/zrDm/set_zrDm interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the dm_enable, AppKey, or Pwd parameter.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in Rakuten Turbo 5G firmware version V1.3.18 and earlier. If this vulnerability is exploited, a remote authenticated attacker may execute an arbitrary OS command.

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into parameters of the Modbus command tool in the debug route.

A SQL injection vulnerability exists in the “reporting job editor” feature of the ScienceLogic SL1 that takes unsanitized user‐controlled input and passes it directly to a SQL query. This allows for the injection of arbitrary SQL before being executed against the database.

A Command Injection vulnerability exists where an authenticated, remote attacker could execute arbitrary code on the underlying server where Tenable Security Center is hosted.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into the devices field when accessing the get setup route, leading to remote code execution.

A vulnerability has been found in Wavlink NU516U1 M16U1_V240425. Affected is the function change_wifi_password of the file /cgi-bin/adm.cgi. The manipulation of the argument wl_channel/wl_Pass/EncrypType leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by configuring a maliciously crafted LCD state which is later processed during system setup, enabling remote code execution.

An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by supplying a crafted template file to the devices route.

An issue was discovered in Logpoint before 7.1.1. Template injection was seen in the search template. The search template uses jinja templating for generating dynamic data. This could be abused to achieve code execution. Any user with access to create a search template can leverage this to execute code as the loginspect user.

openITCOCKPIT is an open source monitoring tool built for different monitoring engines. openITCOCKPIT Community Edition prior to version 5.5.2 contains a command injection vulnerability that allows an authenticated user with permission to add or modify hosts to execute arbitrary OS commands on the monitoring backend. The vulnerability arises because user-controlled host attributes (specifically the host address) are expanded into monitoring command templates without validation, escaping, or quoting. These templates are later executed by the monitoring engine (Nagios/Icinga) via a shell, resulting in remote code execution. Version 5.5.2 patches the issue.

Budibase is an open-source low-code platform. Prior to version 3.33.4, the bash automation step executes user-provided commands using execSync without proper sanitization or validation. User input is processed through processStringSync which allows template interpolation, potentially allowing arbitrary command execution. This issue has been patched in version 3.33.4.

Claude Code is an agentic coding tool. Prior to version 2.0.72, due to an error in command parsing, it was possible to bypass the Claude Code confirmation prompt to trigger execution of untrusted commands through the find command. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.72.

Intelbras WiFiber 120AC inMesh before 1-1-220826 allows command injection by authenticated users, as demonstrated by the /boaform/formPing6 and /boaform/formTracert URIs for ping and traceroute.

A command injection vulnerability has been reported to affect certain versions of Video Station. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Video Station versions prior to 5.5.4 on QTS 4.5.2; versions prior to 5.5.4 on QuTS hero h4.5.2; versions prior to 5.5.4 on QuTScloud c4.5.4. This issue does not affect: QNAP Systems Inc. Video Station on QTS 4.3.6; on QTS 4.3.3.

Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest.

A vulnerability was found in Wavlink NU516U1 M16U1_V240425. Affected by this vulnerability is the function wzdrepeater of the file /cgi-bin/adm.cgi. The manipulation of the argument wlan_bssid/sel_Automode/sel_EncrypTyp results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.

A flaw has been found in Wavlink NU516U1 240425. The impacted element is the function sys_login1 of the file /cgi-bin/login.cgi. Executing a manipulation of the argument ipaddr can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.

Signal K Server is a server application that runs on a central hub in a boat. Prior to 1.5.0, a command injection vulnerability allows authenticated users with write permissions to execute arbitrary shell commands on the Signal K server when the set-system-time plugin is enabled. Unauthenticated users can also exploit this vulnerability if security is disabled on the Signal K server. This occurs due to unsafe construction of shell commands when processing navigation.datetime values received via WebSocket delta messages. This vulnerability is fixed in 1.5.0.

Tenda AX12 V22.03.01.21_CN was found to have a command injection vulnerability via /goform/setMacFilterCfg function.

GitHub Actions Runner is the application that runs a job from a GitHub Actions workflow. The actions runner invokes the docker cli directly in order to run job containers, service containers, or container actions. A bug in the logic for how the environment is encoded into these docker commands was discovered in versions prior to 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4 that allows an input to escape the environment variable and modify that docker command invocation directly. Jobs that use container actions, job containers, or service containers alongside untrusted user inputs in environment variables may be vulnerable. The Actions Runner has been patched, both on `github.com` and hotfixes for GHES and GHAE customers in versions 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4. GHES and GHAE customers may want to patch their instance in order to have their runners automatically upgrade to these new runner versions. As a workaround, users may consider removing any container actions, job containers, or service containers from their jobs until they are able to upgrade their runner versions.

A potential vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow a remote authenticated user on the local network to execute arbitrary commands on the device.

There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.

NeDi 1.9C allows an authenticated user to execute operating system commands in the Nodes Traffic function on the endpoint /Nodes-Traffic.php via the md or ag HTTP GET parameter. This allows an attacker to obtain access to the operating system where NeDi is installed and to all application data.