An authentication bypass vulnerability in Ivanti EPMM 11.10 and older, allows unauthorized users to access restricted functionality or resources of the application without proper authentication. This vulnerability is unique to CVE-2023-35078 announced earlier.

On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.

An authentication bypass vulnerability in Ivanti EPMM allows unauthorized users to access restricted functionality or resources of the application without proper authentication.

Improper Authentication vulnerability in Apache Software Foundation Apache Accumulo. This issue affects Apache Accumulo: 2.1.0. Accumulo 2.1.0 contains a defect in the user authentication process that may succeed when invalid credentials are provided. Users are advised to upgrade to 2.1.1.

SonicWall GMS and Analytics CAS Web Services application use static values for authentication without proper checks leading to authentication bypass vulnerability. This issue affects GMS: 9.3.2-SP1 and earlier versions; Analytics: 2.5.0.4-R7 and earlier versions.

The authentication mechanism in PowerShield SNMP Web Pro 1.1 contains a vulnerability that allows unauthenticated users to directly access Common Gateway Interface (CGI) scripts without proper identification or authorization. This vulnerability arises from a lack of proper cookie verification and affects all instances of SNMP Web Pro 1.1 without HTTP Digest authentication enabled, regardless of the password used for the web interface.

An issue in Planet Technologies WDRT-1800AX v1.01-CP21 allows attackers to bypass authentication and escalate privileges to root via manipulation of the LoginStatus cookie.

pam_krb5 authenticates a user by essentially running kinit with the password, getting a ticket-granting ticket (tgt) from the Kerberos KDC (Key Distribution Center) over the network, as a way to verify the password. However, if a keytab is not provisioned on the system, pam_krb5 has no way to validate the response from the KDC, and essentially trusts the tgt provided over the network as being valid. In a non-default FreeBSD installation that leverages pam_krb5 for authentication and does not have a keytab provisioned, an attacker that is able to control both the password and the KDC responses can return a valid tgt, allowing authentication to occur for any user on the system.

A vulnerability was found in PuneethReddyHC Online Shopping System Advanced 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/reg.php of the component Admin Registration. The manipulation leads to improper authentication. The attack can be launched remotely. The identifier VDB-232009 was assigned to this vulnerability.

Sealos is an open source cloud operating system distribution based on the Kubernetes kernel. In versions of Sealos prior to 4.2.1-rc4 an improper configuration of role based access control (RBAC) permissions resulted in an attacker being able to obtain cluster control permissions, which could control the entire cluster deployed with Sealos, as well as hundreds of pods and other resources within the cluster. This issue has been addressed in version 4.2.1-rc4. Users are advised to upgrade. There are no known workarounds for this vulnerability.

The authentication mechanism in SonicWall GMS and Analytics Web Services had insufficient checks, allowing authentication bypass. This issue affects GMS: 9.3.2-SP1 and earlier versions; Analytics: 2.5.0.4-R7 and earlier versions.

Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

Milesight NCR/camera version 71.8.0.6-r5 allows authentication bypass through an unspecified method.

Teltonika’s Remote Management System versions prior to 4.10.0 use device serial numbers and MAC addresses to identify devices from the user perspective for device claiming and from the device perspective for authentication. If an attacker obtained the serial number and MAC address of a device, they could authenticate as that device and steal communication credentials of the device. This could allow an attacker to enable arbitrary command execution as root by utilizing management options within the newly registered devices.

Improper authentication of Non-EAPOL/WAPI plaintext frames during four-way handshake can lead to arbitrary network packet injection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

ESPv2 is a service proxy that provides API management capabilities using Google Service Infrastructure. ESPv2 2.20.0 through 2.42.0 contains an authentication bypass vulnerability. API clients can craft a malicious `X-HTTP-Method-Override` header value to bypass JWT authentication in specific cases. ESPv2 allows malicious requests to bypass authentication if both the conditions are true: The requested HTTP method is **not** in the API service definition (OpenAPI spec or gRPC `google.api.http` proto annotations, and the specified `X-HTTP-Method-Override` is a valid HTTP method in the API service definition. ESPv2 will forward the request to your backend without checking the JWT. Attackers can craft requests with a malicious `X-HTTP-Method-Override` value that allows them to bypass specifying JWTs. Restricting API access with API keys works as intended and is not affected by this vulnerability. Upgrade deployments to release v2.43.0 or higher to receive a patch. This release ensures that JWT authentication occurs, even when the caller specifies `x-http-method-override`. `x-http-method-override` is still supported by v2.43.0+. API clients can continue sending this header to ESPv2.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

A flaw was found in Apache ShenYu Admin. The incorrect use of JWT in ShenyuAdminBootstrap allows an attacker to bypass authentication. This issue affected Apache ShenYu 2.3.0 and 2.4.0

Pega platform clients who are using versions 6.1 through 7.3.1 may be utilizing default credentials

Webauthn Framework 3.3.x before 3.3.4 has Incorrect Access Control. An attacker that controls a user's system is able to login to a vulnerable service using an attached FIDO2 authenticator without passing a check of the user presence.

Multiple Services such as VHS(Video History Server) and VCD(Video Clip Distributor) and Clips2 were discovered to be vulnerable to an unauthenticated arbitrary file read/write vulnerability due to missing input validation on filenames. A malicious attacker could read sensitive files from the filesystem or write/delete arbitrary files on the filesystem as well.

Improper Authentication vulnerability in Easy Digital Downloads plugin allows unauth. Privilege Escalation. This issue affects Easy Digital Downloads: from 3.1 through 3.1.1.4.1.

Gotham Orbital-Simulator service prior to 0.692.0 was found to be vulnerable to a Path traversal issue allowing an unauthenticated user to read arbitrary files on the file system.

Improper authentication vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

An unauthenticated user could log into iSTAR Ultra, iSTAR Ultra LT, iSTAR Ultra G2, and iSTAR Edge G2 with administrator rights.

In TeslaMate before 1.27.2, there is unauthorized access to port 4000 for remote viewing and operation of user data. After accessing the IP address for the TeslaMate instance, an attacker can switch the port to 3000 to enter Grafana for remote operations. At that time, the default username and password can be used to enter the Grafana management console without logging in, a related issue to CVE-2022-23126.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use.

Unverified Password Change in GitHub repository tsolucio/corebos prior to 8.

Improper Authentication vulnerability in WPDeveloper Essential Addons for Elementor allows Privilege Escalation. This issue affects Essential Addons for Elementor: from 5.4.0 through 5.7.1.

There is an improper authentication vulnerability in Hero-CT060 before 1.0.0.200. The vulnerability is due to that when an user wants to do certain operation, the software does not insufficiently validate the user's identity. Successful exploit could allow the attacker to do certain operations which the user are supposed not to do.

An issue was discovered in LemonLDAP::NG before 2.16.1. Weak session ID generation in the AuthBasic handler and incorrect failure handling during a password check allow attackers to bypass 2FA verification. Any plugin that tries to deny session creation after the store step does not deny an AuthBasic session.

Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.

Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.17.3 < V1.18.0), Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.3.0 < V2.4.0), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.3.1 < V3.6.1), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.3.0 < V3.6.0), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.12/9.18 compatible, New Track) (All versions >= V3.3.1 < V3.3.15), Mendix SAML (Mendix 9.12/9.18 compatible, Upgrade Track) (All versions >= V3.3.0 < V3.3.14), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. This CVE entry describes the incomplete fix for CVE-2023-25957 in a specific non default configuration.

api/auth.go in Ansible Semaphore before 2.8.89 mishandles authentication.

Improper authentication vulnerability in T&D Corporation and ESPEC MIC CORP. data logger products allows a remote unauthenticated attacker to login to the product as a registered user. Affected products and versions are as follows: T&D Corporation data logger products (TR-71W/72W all firmware versions, RTR-5W all firmware versions, WDR-7 all firmware versions, WDR-3 all firmware versions, and WS-2 all firmware versions), and ESPEC MIC CORP. data logger products (RT-12N/RS-12N all firmware versions, RT-22BN all firmware versions, and TEU-12N all firmware versions).

file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

maddy is a composable, all-in-one mail server. Starting with version 0.2.0 and prior to version 0.6.3, maddy allows a full authentication bypass if SASL authorization username is specified when using the PLAIN authentication mechanisms. Instead of validating the specified username, it is accepted as is after checking the credentials for the authentication username. maddy 0.6.3 includes the fix for the bug. There are no known workarounds.

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

Teltonika’s Remote Management System versions 4.14.0 is vulnerable to an unauthorized attacker registering previously unregistered devices through the RMS platform. If the user has not disabled the "RMS management feature" enabled by default, then an attacker could register that device to themselves. This could enable the attacker to perform different operations on the user's devices, including remote code execution with 'root' privileges (using the 'Task Manager' feature on RMS).

An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

Improper Authentication vulnerability in Apache Software Foundation Apache IoTDB.This issue affects Apache IoTDB Grafana Connector: from 0.13.0 through 0.13.3. Attackers could login without authorization. This is fixed in 0.13.4.

Use of default password vulnerability in PowerPanel Business Local/Remote for Windows v4.8.6 and earlier, PowerPanel Business Management for Windows v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 32bit v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 64bit v4.8.6 and earlier, PowerPanel Business Management for Linux 32bit v4.8.6 and earlier, PowerPanel Business Management for Linux 64bit v4.8.6 and earlier, PowerPanel Business Local/Remote for MacOS v4.8.6 and earlier, and PowerPanel Business Management for MacOS v4.8.6 and earlier allows remote attackers to log in to the server directly to perform administrative functions. Upon installation or upon first login, the application does not ask the user to change the 'admin' password.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.