A stack-based buffer overflow vulnerability was found in the ASUSTOR Data Master (ADM) due to the lack of data size validation. An attacker can exploit this vulnerability to execute arbitrary code. Affected ADM versions include: 4.0.6.REG2, 4.1.0 and below as well as 4.2.0.RE71 and below.

An improper Input Validation vulnerability allows injecting arbitrary values of the NAS configuration file in ASUSTOR ADM. This could potentially lead to system misconfiguration and break the format of the configuation file, causing the NAS to exhibit unexpected behavior. This issue affects ADM: from 4.1 before 4.3.1.R5A1.

VMware View Planner 4.x prior to 4.6 Security Patch 1 contains a remote code execution vulnerability. Improper input validation and lack of authorization leading to arbitrary file upload in logupload web application. An unauthorized attacker with network access to View Planner Harness could upload and execute a specially crafted file leading to remote code execution within the logupload container.

org.springframework.core.serializer.DefaultDeserializer in Spring AMQP before 1.5.5 allows remote attackers to execute arbitrary code.

Ezviz Internet PT Camera CS-CV246 D15655150 allows an unauthenticated host to access its live video stream by crafting a set of RTSP packets with a specific set of URLs that can be used to redirect the camera feed. NOTE: the vendor's perspective is that the Anonymous120386 sample code can establish RTSP protocol communictaion, but cannot obtain video or audio data; thus, there is no risk.

Lack of check of address range received from firmware response allows modem to respond arbitrary pages into its address range which can compromise HLOS in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MSM8909W, MSM8996AU, QCS405, QCS605, Qualcomm 215, SD 425, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820A, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM660, SDX20, SDX24

The Service Appliance component in Mitel MiVoice Connect through 19.2 SP3 allows remote code execution because of incorrect data validation. The Service Appliances are SA 100, SA 400, and Virtual SA.

Insufficient input validation in the subsystem for Intel(R) AMT before version 12.0.45 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

streamlit-geospatial is a streamlit multipage app for geospatial applications. Prior to commit c4f81d9616d40c60584e36abb15300853a66e489, the `palette` variable on line 488 in `pages/1_📷_Timelapse.py` takes user input, which is later used in the `eval()` function on line 493, leading to remote code execution. Commit c4f81d9616d40c60584e36abb15300853a66e489 fixes this issue.

An issue was discovered in ONOS 2.5.1. An intent with a large port number shows the CORRUPT state, which is misleading to a network operator. Improper handling of such port numbers causes inconsistency between intent and flow rules in the network.

A memory corruption vulnerability exists in the cgi.c unescape functionality of ArduPilot APWeb master branch 50b6b7ac - master branch 46177cb9. A specially-crafted HTTP request can lead to memory corruption. An attacker can send a network request to trigger this vulnerability.

In the vote (aka "Polls, Votes") module before 21.0.100 of Bitrix Site Manager, a remote unauthenticated attacker can execute arbitrary code.

In Realtek eCos RSDK 1.5.7p1 and MSDK 4.9.4p1, the SIP ALG function that rewrites SDP data has a stack-based buffer overflow. This allows an attacker to remotely execute code without authentication via a crafted SIP packet that contains malicious SDP data.

CWE-20 vulnerability in MolotovCherry Android-ImageMagick7.This issue affects Android-ImageMagick7: before 7.1.2-11.

A vulnerability has been found in ILIAS up to 8.23/9.13/10.1. This affects the function unserialize of the component Base64 Decoding Handler. Such manipulation of the argument f_settings leads to deserialization. It is possible to launch the attack remotely. Upgrading to version 8.24, 9.14 and 10.2 is able to mitigate this issue. It is advisable to upgrade the affected component.

SAPCAR - version 7.22, does not contain sufficient input validation on the SAPCAR archive. As a result, the SAPCAR process may crash, and the attacker may obtain privileged access to the system.

A vulnerability was found in taisan tarzan-cms up to 1.0.0. It has been rated as critical. This issue affects the function upload of the file /admin#themes of the component Add Theme Handler. The manipulation leads to deserialization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Microsoft Edge (Chromium-based) Remote Code Execution Vulnerability

A vulnerability chain in Cribl Edge for Windows before 4.17.1 allows a local authenticated user to escalate privileges to NT AUTHORITY\SYSTEM. Incorrect default permissions on the Windows installer's authentication directory (CWE-276) expose a cryptographic secret used for JWT signing and password-hash derivation, enabling forgery of administrative API tokens. The forged token can then be used to invoke a pipeline function that reaches an OS command sink (CWE-78) running in the SYSTEM context.

Apache Flume versions 1.4.0 through 1.9.0 are vulnerable to a remote code execution (RCE) attack when a configuration uses a JMS Source with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI to allow only the use of the java protocol or no protocol.

CodeIgniter4 is the 4.x branch of CodeIgniter, a PHP full-stack web framework. Prior to version 4.1.9, an improper input validation vulnerability allows attackers to execute CLI routes via HTTP request. Version 4.1.9 contains a patch. There are currently no known workarounds for this vulnerability.

Improper boundary check in UWB stack prior to SMR Mar-2022 Release 1 allows arbitrary code execution.

Ballcat Codegen provides the function of online editing code to generate templates. In versions prior to 1.0.0.beta.2, attackers can implement remote code execution through malicious code injection of the template engine. This happens because Velocity and freemarker templates are introduced but input verification is not done. The fault is rectified in version 1.0.0.beta.2.

WGDashboard is a dashboard for WireGuard VPN. Prior to 4.3.2, there are critical vulnerabilities affecting WGDashboard that, if exploited, could allow unauthorized parties to access the host file system without authentication. This vulnerability is fixed in 4.3.2.

All versions of package gitpython are vulnerable to Remote Code Execution (RCE) due to improper user input validation, which makes it possible to inject a maliciously crafted remote URL into the clone command. Exploiting this vulnerability is possible because the library makes external calls to git without sufficient sanitization of input arguments.

Adobe Commerce versions 2.4.3-p1 (and earlier) and 2.3.7-p2 (and earlier) are affected by an improper input validation vulnerability during the checkout process. Exploitation of this issue does not require user interaction and could result in arbitrary code execution.

Failure to validate the AMD SMM communication buffer may allow an attacker to corrupt the SMRAM potentially leading to arbitrary code execution.

XCOM Data Transport for Windows, Linux, and UNIX 11.6 releases contain a vulnerability due to insufficient input validation that could potentially allow remote attackers to execute arbitrary commands with elevated privileges.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

Memory corruption in modem due to improper length check while copying into memory

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, Flowise is vulnerable to a critical unauthenticated remote command execution (RCE) vulnerability. It can be exploited via a parameter override bypass using the FILE-STORAGE:: keyword combined with a NODE_OPTIONS environment variable injection. This allows for the execution of arbitrary system commands with root privileges within the containerized Flowise instance, requiring only a single HTTP request and no authentication or knowledge of the instance. This vulnerability is fixed in 3.1.0.

Improper Input Validation vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117, from 10.0.0-M1 through 10.0.27. Older, end of support versions may also be affected. Users are recommended to upgrade to version [FIXED_VERSION], which fixes the issue.

Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.

Improper Input Validation vulnerability in Mitsubishi Electric MELSEC-Q Series QJ71E71-100 first 5 digits of serial number "24061" or prior, Mitsubishi Electric MELSEC-L series LJ71E71-100 first 5 digits of serial number "24061" or prior and Mitsubishi Electric MELSEC iQ-R Series RD81MES96N firmware version "08" or prior allows a remote unauthenticated attacker to cause a denial of service (DoS) condition or execute malicious code on the target products by sending specially crafted packets.

A remote code execution vulnerability is present in network-listening components in some versions of ArubaOS. An attacker with the ability to transmit specially-crafted IP traffic to a mobility controller could exploit this vulnerability and cause a process crash or to execute arbitrary code within the underlying operating system with full system privileges. Such an attack could lead to complete system compromise. The ability to transmit traffic to an IP interface on the mobility controller is required to carry out an attack. The attack leverages the PAPI protocol (UDP port 8211). If the mobility controller is only bridging L2 traffic to an uplink and does not have an IP address that is accessible to the attacker, it cannot be attacked.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'network.ieee8021x.delete_certs'.

The hhvm-attach deep link handler in Nuclide did not properly sanitize the provided hostname parameter when rendering. As a result, a malicious URL could be used to render HTML and other content inside of the editor's context, which could potentially be chained to lead to code execution. This issue affected Nuclide prior to v0.290.0.

image_processing is an image processing wrapper for libvips and ImageMagick/GraphicsMagick. Prior to version 1.12.2, using the `#apply` method from image_processing to apply a series of operations that are coming from unsanitized user input allows the attacker to execute shell commands. This method is called internally by Active Storage variants, so Active Storage is vulnerable as well. The vulnerability has been fixed in version 1.12.2 of image_processing. As a workaround, users who process based on user input should always sanitize the user input by allowing only a constrained set of operations.

A vulnerability was found in dayrui XunRuiCMS up to 4.6.4. It has been declared as critical. This vulnerability affects unknown code of the file /Control/Api/Api.php. The manipulation of the argument thumb leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

CKAN is an open-source data management system for powering data hubs and data portals. Multiple vulnerabilities have been discovered in Ckan which may lead to remote code execution. An arbitrary file write in `resource_create` and `package_update` actions, using the `ResourceUploader` object. Also reachable via `package_create`, `package_revise`, and `package_patch` via calls to `package_update`. Remote code execution via unsafe pickle loading, via Beaker's session store when configured to use the file session store backend. Potential DOS due to lack of a length check on the resource id. Information disclosure: A user with permission to create a resource can access any other resource on the system if they know the id, even if they don't have access to it. Resource overwrite: A user with permission to create a resource can overwrite any resource if they know the id, even if they don't have access to it. A user with permissions to create or edit a dataset can upload a resource with a specially crafted id to write the uploaded file in an arbitrary location. This can be leveraged to Remote Code Execution via Beaker's insecure pickle loading. All the above listed vulnerabilities have been fixed in CKAN 2.9.9 and CKAN 2.10.1. Users are advised to upgrade. There are no known workarounds for these issues.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

A flaw has been found in ILIAS up to 8.23/9.13/10.1. Affected by this issue is the function unserialize of the component Test Import. This manipulation causes deserialization. It is possible to initiate the attack remotely. Upgrading to version 8.24, 9.14 and 10.2 can resolve this issue. Upgrading the affected component is advised.

OpenFGA is a high-performance and flexible authorization/permission engine built for developers and inspired by Google Zanzibar. In versions prior to 1.13.1, under specific conditions, models using conditions with caching enabled can result in two different check requests producing the same cache key. This can result in OpenFGA reusing an earlier cached result for a different request. Users are affected if the model has relations which rely on condition evaluation andncaching is enabled. OpenFGA v1.13.1 contains a patch.

A vulnerability was found in wangl1989 mysiteforme 1.0 and classified as critical. Affected by this issue is the function rememberMeManager of the file src/main/java/com/mysiteforme/admin/config/ShiroConfig.java. The manipulation leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in dayrui XunRuiCMS 4.6.3. It has been classified as critical. Affected is the function import_add of the file dayrui/Fcms/Control/Admin/Linkage.php. The manipulation leads to deserialization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Insufficient URI encoding in restforce before 3.0.0 allows attacker to inject arbitrary parameters into Salesforce API requests.

This vulnerability could allow a remote attacker to execute remote commands with improper validation of parameters of certain API constructors. Remote attackers could use this vulnerability to execute malicious commands such as directory traversal.