Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory).

In Mosquitto before 2.0.16, a memory leak occurs when clients send v5 CONNECT packets with a will message that contains invalid property types.

In Eclipse Jetty 9.4.6.v20170531 to 9.4.36.v20210114 (inclusive), 10.0.0, and 11.0.0 when Jetty handles a request containing multiple Accept headers with a large number of “quality” (i.e. q) parameters, the server may enter a denial of service (DoS) state due to high CPU usage processing those quality values, resulting in minutes of CPU time exhausted processing those quality values.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol.

In Eclipse Mosquitto 1.4.14, if a Mosquitto instance is set running with a configuration file, then sending a HUP signal to server triggers the configuration to be reloaded from disk. If there are lots of clients connected so that there are no more file descriptors/sockets available (default limit typically 1024 file descriptors on Linux), then opening the configuration file will fail.

In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.vertx:vertx-grpc-client).  This is fixed in the 4.5.10 version.  Note this does not affect the Vert.x gRPC server based grpc-java and Netty libraries (Maven GAV: io.vertx:vertx-grpc)

Jetty PushSessionCacheFilter can be exploited by unauthenticated users to launch remote DoS attacks by exhausting the server’s memory.

Jetty is a Java based web server and servlet engine. An HTTP/2 SSL connection that is established and TCP congested will be leaked when it times out. An attacker can cause many connections to end up in this state, and the server may run out of file descriptors, eventually causing the server to stop accepting new connections from valid clients. The vulnerability is patched in 9.4.54, 10.0.20, 11.0.20, and 12.0.6.

In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the WebSocket HTTP upgrade implementation buffers the full http request before doing the handshake, holding the entire request body in memory. There should be a reasonnable limit (8192 bytes) above which the WebSocket gets an HTTP response with the 413 status code and the connection gets closed.

There exists a security vulnerability in Jetty's ThreadLimitHandler.getRemote() which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory.

The package org.eclipse.milo:sdk-server before 0.6.8 are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

In Eclipse Jetty version 9.3.x and 9.4.x, the server is vulnerable to Denial of Service conditions if a remote client sends either large SETTINGs frames container containing many settings, or many small SETTINGs frames. The vulnerability is due to the additional CPU and memory allocations required to handle changed settings.

Password Pusher, an open source application to communicate sensitive information over the web, comes with a configurable rate limiter. In versions prior to v1.49.0, the rate limiter could be bypassed by forging proxy headers allowing bad actors to send unlimited traffic to the site potentially causing a denial of service. In v1.49.0, a fix was implemented to only authorize proxies on local IPs which resolves this issue. As a workaround, one may add rules to one's proxy and/or firewall to not accept external proxy headers such as `X-Forwarded-*` from clients.

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

An issue was discovered in OPC Foundation OPCFoundation/UA-.NETStandard through 1.5.374.78. A remote attacker can send requests with invalid credentials and cause the server performance to degrade gradually.

An issue has been discovered in GitLab CE/EE affecting all versions from 14.1 before 18.1.5, 18.2 before 18.2.5, and 18.3 before 18.3.1 that that under certain conditions could have allowed an unauthenticated attacker to cause a denial-of-service condition affecting all users by sending specially crafted GraphQL requests.

The direct_mail extension through 5.2.3 for TYPO3 allows Denial of Service via log entries.

Joomla! 1.03 does not restrict the number of "Search" Mambots, which allows remote attackers to cause a denial of service (resource consumption) via a large number of Search Mambots.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

@grpc/grps-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Prior to versions 1.10.9, 1.9.15, and 1.8.22, there are two separate code paths in which memory can be allocated per message in excess of the `grpc.max_receive_message_length` channel option: If an incoming message has a size on the wire greater than the configured limit, the entire message is buffered before it is discarded; and/or if an incoming message has a size within the limit on the wire but decompresses to a size greater than the limit, the entire message is decompressed into memory, and on the server is not discarded. This has been patched in versions 1.10.9, 1.9.15, and 1.8.22.

Matrix Media Repo (MMR) is a highly configurable multi-homeserver media repository for Matrix. MMR before version 1.3.5 is vulnerable to unbounded disk consumption, where an unauthenticated adversary can induce it to download and cache large amounts of remote media files. MMR's typical operating environment uses S3-like storage as a backend, with file-backed store as an alternative option. Instances using a file-backed store or those which self-host an S3 storage system are therefore vulnerable to a disk fill attack. Once the disk is full, authenticated users will be unable to upload new media, resulting in denial of service. For instances configured to use a cloud-based S3 storage option, this could result in high service fees instead of a denial of service. MMR 1.3.5 introduces a new default-on "leaky bucket" rate limit to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data. Operators should note that the leaky bucket implementation introduced in MMR 1.3.5 requires the IP address associated with the request to be forwarded, to avoid mistakenly applying the rate limit to the reverse proxy instead. To avoid this issue, the reverse proxy should populate the X-Forwarded-For header when sending the request to MMR. Operators who cannot update may wish to lower the maximum file size they allow and implement harsh rate limits, though this can still lead to a large amount of data to be downloaded.

On MX Series platforms with MS-MPC/MS-MIC, an Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated network attacker to cause a partial Denial of Service (DoS) with a high rate of specific traffic. If a Class of Service (CoS) rule is attached to the service-set and a high rate of specific traffic is processed by this service-set, for some of the other traffic which has services applied and is being processed by this MS-MPC/MS-MIC drops will be observed. Continued receipted of this high rate of specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on MX Series with MS-MPC/MS-MIC: All versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.

REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. The `HttpPostRequestDecoder` can be tricked to accumulate data. While the decoder can store items on the disk if configured so, there are no limits to the number of fields the form can have, an attacher can send a chunked post consisting of many small fields that will be accumulated in the `bodyListHttpData` list. The decoder cumulates bytes in the `undecodedChunk` buffer until it can decode a field, this field can cumulate data without limits. This vulnerability is fixed in 4.1.108.Final.

nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.

On version 15.1.x before 15.1.3, 14.1.x before 14.1.3.1, and 13.1.x before 13.1.3.6, when the brute force protection feature of BIG-IP Advanced WAF or BIG-IP ASM is enabled on a virtual server and the virtual server is under brute force attack, the MySQL database may run out of disk space due to lack of row limit on undisclosed tables in the MYSQL database. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 13.2. When querying the repository branches through API, GitLab was ignoring a query parameter and returning a considerable amount of results.

A vulnerability in the SSH server of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for the SSH server of an affected device. This vulnerability is due to a logic error when an SSH session is established. An attacker could exploit this vulnerability by sending crafted SSH messages to an affected device. A successful exploit could allow the attacker to exhaust available SSH resources on the affected device so that new SSH connections to the device are denied, resulting in a DoS condition. Existing SSH connections to the device would continue to function normally. The device must be rebooted manually to recover. However, user traffic would not be impacted and could be managed using a remote application such as Cisco Adaptive Security Device Manager (ASDM).

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

An allocation of resources without limits or throttling [CWE-770] vulnerability in FortiOS versions 7.6.0, versions 7.4.4 through 7.4.0, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow a remote unauthenticated attacker to prevent access to the GUI via specially crafted requests directed at specific endpoints.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in image decoders. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. This flaw can be exploited to cause a denial of service (DoS) by depleting process memory, thereby affecting applications and services that rely on ImageSharp for image processing tasks. Users and administrators are advised to update to the latest version of ImageSharp that addresses this vulnerability to mitigate the risk of exploitation. The problem has been patched in v3.1.4 and v2.1.8.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

In Puma before versions 3.12.2 and 4.3.1, a poorly-behaved client could use keepalive requests to monopolize Puma's reactor and create a denial of service attack. If more keepalive connections to Puma are opened than there are threads available, additional connections will wait permanently if the attacker sends requests frequently enough. This vulnerability is patched in Puma 4.3.1 and 3.12.2.

An Allocation of Resources Without Limits or Throttling vulnerability in Cesanta Frozen versions less than 1.7 allows an attacker to induce a crash of the component embedding the library by supplying a maliciously crafted JSON as input.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

Due to an allocation of resources without limits, an uncontrolled resource consumption vulnerability exists in Silicon Labs Ember ZNet SDK prior to v7.4.0.0 (delivered as part of Silicon Labs Gecko SDK v4.4.0) which may enable attackers to trigger a bus fault and crash of the device, requiring a reboot in order to rejoin the network.

A flaw was found in Open Virtual Network where the service monitor MAC does not properly rate limit. This issue could allow an attacker to cause a denial of service, including on deployments with CoPP enabled and properly configured.

Ribose RNP before 0.16.3 may hang when the input is malformed.

Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2.

An HTTP/2 implementation flaw allows a denial-of-service (DoS) that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit (HTTP/2 MadeYouReset Attack).  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11.

An issue was discovered in Stormshield SNS before 4.2.3 (when the proxy is used). An attacker can saturate the proxy connection table. This would result in the proxy denying any new connections.

Mastodon is a free, open-source social network server based on ActivityPub Mastodon which facilitates LDAP configuration for authentication. In versions 3.1.5 through 4.2.24, 4.3.0 through 4.3.11 and 4.4.0 through 4.4.3, Mastodon's rate-limiting system has a critical configuration error where the email-based throttle for confirmation emails incorrectly checks the password reset path instead of the confirmation path, effectively disabling per-email limits for confirmation requests. This allows attackers to bypass rate limits by rotating IP addresses and send unlimited confirmation emails to any email address, as only a weak IP-based throttle (25 requests per 5 minutes) remains active. The vulnerability enables denial-of-service attacks that can overwhelm mail queues and facilitate user harassment through confirmation email spam. This is fixed in versions 4.2.24, 4.3.11 and 4.4.3.

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames exercising an opportunistic ACK attack; see RFC 9000 Section 21.4. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

OpenZeppelin Contracts is a library for secure smart contract development. The target contract of an EIP-165 `supportsInterface` query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost. The issue has been fixed in v4.7.2. Users are advised to upgrade. There are no known workarounds for this issue.

A flaw was found in Rust's Ring package. A panic may be triggered when overflow checking is enabled. In the QUIC protocol, this flaw allows an attacker to induce this panic by sending a specially crafted packet. It will likely occur unintentionally in 1 out of every 2**32 packets sent or received.