An issue was discovered in picoTCP 1.7.0. The code for creating an ICMPv6 echo replies doesn't check whether the ICMPv6 echo request packet's size is shorter than 8 bytes. If the size of the incoming ICMPv6 request packet is shorter than this, the operation that calculates the size of the ICMPv6 echo replies has an integer wrap around, leading to memory corruption and, eventually, Denial-of-Service in pico_icmp6_send_echoreply_not_frag in pico_icmp6.c.

An issue was discovered in apng2gif 1.7. There is an integer overflow resulting in a heap-based buffer over-read, related to the load_apng function and the imagesize variable.

On High-End SRX Series devices, in specific configurations and when specific networking events or operator actions occur, an SPC receiving genuine multicast traffic may core. Subsequently, all FPCs in a chassis may reset causing a Denial of Service. This issue affects both IPv4 and IPv6. This issue affects: Juniper Networks Junos OS 12.3X48 version 12.3X48-D80 and later versions prior to 12.3X48-D95 on High-End SRX Series. This issue does not affect Branch SRX Series devices.

An integer overflow vulnerability in the source code of the QuickSec IPSec toolkit used in the VPN feature of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions on an affected device by sending a crafted IKE packet.

yajl-ruby is a C binding to the YAJL JSON parsing and generation library. The 1.x branch and the 2.x branch of `yajl` contain an integer overflow which leads to subsequent heap memory corruption when dealing with large (~2GB) inputs. The reallocation logic at `yajl_buf.c#L64` may result in the `need` 32bit integer wrapping to 0 when `need` approaches a value of 0x80000000 (i.e. ~2GB of data), which results in a reallocation of buf->alloc into a small heap chunk. These integers are declared as `size_t` in the 2.x branch of `yajl`, which practically prevents the issue from triggering on 64bit platforms, however this does not preclude this issue triggering on 32bit builds on which `size_t` is a 32bit integer. Subsequent population of this under-allocated heap chunk is based on the original buffer size, leading to heap memory corruption. This vulnerability mostly impacts process availability. Maintainers believe exploitation for arbitrary code execution is unlikely. A patch is available and anticipated to be part of yajl-ruby version 1.4.2. As a workaround, avoid passing large inputs to YAJL.

An issue was discovered in Contiki through 3.0. An Integer Overflow exists in the uIP TCP/IP Stack component when parsing TCP MSS options of IPv4 network packets in uip_process in net/ipv4/uip.c.

An issue was discovered in Contiki through 3.0. A memory corruption vulnerability exists in the uIP TCP/IP stack component when handling RPL extension headers of IPv6 network packets in rpl_remove_header in net/rpl/rpl-ext-header.c.

Memory leaks were discovered in the CoAP library in Arm Mbed OS 5.15.3 when using the Arm mbed-coap library 5.1.5. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP option number field of all options present in the input packet. Each option number is calculated as a sum of the previous option number and a delta of the current option. The delta and the previous option number are expressed as unsigned 16-bit integers. Due to lack of overflow detection, it is possible to craft a packet that wraps the option number around and results in the same option number being processed again in a single packet. Certain options allocate memory by calling a memory allocation function. In the cases of COAP_OPTION_URI_QUERY, COAP_OPTION_URI_PATH, COAP_OPTION_LOCATION_QUERY, and COAP_OPTION_ETAG, there is no check on whether memory has already been allocated, which in conjunction with the option number integer overflow may lead to multiple assignments of allocated memory to a single pointer. This has been demonstrated to lead to memory leak by buffer orphaning. As a result, the memory is never freed.

An integer overflow in Nethermind Juno before v.12.05 within the Sierra bytecode decompression logic within the "cairo-lang-starknet-classes" library could allow remote attackers to trigger an infinite loop (and high CPU usage) by submitting a malicious Declare v2/v3 transaction. This results in a denial-of-service condition for affected Starknet full-node implementations.

In SQLite 3.44.0 through 3.49.0 before 3.49.1, the concat_ws() SQL function can cause memory to be written beyond the end of a malloc-allocated buffer. If the separator argument is attacker-controlled and has a large string (e.g., 2MB or more), an integer overflow occurs in calculating the size of the result buffer, and thus malloc may not allocate enough memory.

A remote adversary with the ability to send arbitrary CoAP packets to be parsed by Zephyr is able to cause a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

Integer overflow in the vmnc decoder in the gstreamer allows remote attackers to cause a denial of service (crash) via large width and height values, which triggers a buffer overflow.

In exif_data_load_data_thumbnail of exif-data.c, there is a possible denial of service due to an integer overflow. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-145075076

In Bluetooth, there is a possible crash due to an integer overflow. This could lead to remote denial of service on incoming calls with no additional execution privileges needed. User interaction is not needed for exploitation. Product: AndroidVersions: Android-10Android ID: A-79431031

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. An Integer overflow in the built-in web server allows remote attackers to initiate DoS.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where a user could cause an integer overflow or wraparound, leading to a segmentation fault, by providing an invalid request. A successful exploit of this vulnerability might lead to denial of service.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where a user could cause an integer overflow or wraparound, leading to a segmentation fault, by providing an invalid request. A successful exploit of this vulnerability might lead to denial of service.

iperf3 before 3.14 allows peers to cause an integer overflow and heap corruption via a crafted length field.

Eclipse Jetty provides a web server and servlet container. In versions 11.0.0 through 11.0.15, 10.0.0 through 10.0.15, and 9.0.0 through 9.4.52, an integer overflow in `MetaDataBuilder.checkSize` allows for HTTP/2 HPACK header values to exceed their size limit. `MetaDataBuilder.java` determines if a header name or value exceeds the size limit, and throws an exception if the limit is exceeded. However, when length is very large and huffman is true, the multiplication by 4 in line 295 will overflow, and length will become negative. `(_size+length)` will now be negative, and the check on line 296 will not be triggered. Furthermore, `MetaDataBuilder.checkSize` allows for user-entered HPACK header value sizes to be negative, potentially leading to a very large buffer allocation later on when the user-entered size is multiplied by 2. This means that if a user provides a negative length value (or, more precisely, a length value which, when multiplied by the 4/3 fudge factor, is negative), and this length value is a very large positive number when multiplied by 2, then the user can cause a very large buffer to be allocated on the server. Users of HTTP/2 can be impacted by a remote denial of service attack. The issue has been fixed in versions 11.0.16, 10.0.16, and 9.4.53. There are no known workarounds.

snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing an unrecoverable fatal error. The function `compress(char[] input)` in the file `Snappy.java` receives an array of characters and compresses it. It does so by multiplying the length by 2 and passing it to the rawCompress` function. Since the length is not tested, the multiplication by two can cause an integer overflow and become negative. The rawCompress function then uses the received length and passes it to the natively compiled maxCompressedLength function, using the returned value to allocate a byte array. Since the maxCompressedLength function treats the length as an unsigned integer, it doesn’t care that it is negative, and it returns a valid value, which is casted to a signed integer by the Java engine. If the result is negative, a `java.lang.NegativeArraySizeException` exception will be raised while trying to allocate the array `buf`. On the other side, if the result is positive, the `buf` array will successfully be allocated, but its size might be too small to use for the compression, causing a fatal Access Violation error. The same issue exists also when using the `compress` functions that receive double, float, int, long and short, each using a different multiplier that may cause the same issue. The issue most likely won’t occur when using a byte array, since creating a byte array of size 0x80000000 (or any other negative value) is impossible in the first place. Version 1.1.10.1 contains a patch for this issue.

Sofia-SIP is an open-source SIP User-Agent library, compliant with the IETF RFC3261 specification. Referring to [GHSA-8599-x7rq-fr54](https://github.com/freeswitch/sofia-sip/security/advisories/GHSA-8599-x7rq-fr54), several other potential heap-over-flow and integer-overflow in stun_parse_attr_error_code and stun_parse_attr_uint32 were found because the lack of attributes length check when Sofia-SIP handles STUN packets. The previous patch of [GHSA-8599-x7rq-fr54](https://github.com/freeswitch/sofia-sip/security/advisories/GHSA-8599-x7rq-fr54) fixed the vulnerability when attr_type did not match the enum value, but there are also vulnerabilities in the handling of other valid cases. The OOB read and integer-overflow made by attacker may lead to crash, high consumption of memory or even other more serious consequences. These issue have been addressed in version 1.13.15. Users are advised to upgrade.

A set of carefully crafted ipv6 packets can trigger an integer overflow in the calculation of a fragment reassembled packet's payload length field. This allows an attacker to trigger a kernel panic, resulting in a denial of service.

Vyper is a Pythonic smart contract language for the Ethereum virtual machine. Prior to version 0.3.8, due to missing overflow check for loop variables, by assigning the iterator of a loop to a variable, it is possible to overflow the type of the latter. The issue seems to happen only in loops of type `for i in range(a, a + N)` as in loops of type `for i in range(start, stop)` and `for i in range(stop)`, the compiler is able to raise a `TypeMismatch` when trying to overflow the variable. The problem has been patched in version 0.3.8.

The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability, an integer overflow condition exists in the affected products. When the ThinManager processes incoming messages, a read access violation occurs and terminates the process. A malicious user could exploit this vulnerability by sending a crafted synchronization protocol message and causing a denial of service condition in the software.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18305, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server could trigger a Denial-of-Service condition by sending specifically crafted packets to port 5010/tcp. This vulnerability is independent from CVE-2019-18290, CVE-2019-18291, CVE-2019-18292, CVE-2019-18294, CVE-2019-18298, CVE-2019-18299, CVE-2019-18300, CVE-2019-18301, CVE-2019-18302, CVE-2019-18303, CVE-2019-18304, CVE-2019-18306, and CVE-2019-18307. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet header. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier plus the header length. WsfMsgAlloc then increments this again by sizeof(wsfMsg_t). This may cause an integer overflow that results in the buffer being significantly too small to contain the entire packet. This may cause a buffer overflow of up to 65 KB . This bug is trivial to exploit for a denial of service but can generally not be exploited further because the exploitable buffer is dynamically allocated.

From version 0.2.14 to 0.2.16 for Solana rBPF, function "relocate" in the file src/elf.rs has an integer overflow bug because the sym.st_value is read directly from ELF file without checking. If the sym.st_value is rather large, an integer overflow is triggered while calculating the variable "addr" via "addr = (sym.st_value + refd_pa) as u64";

An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer.

A malicious value of size in a structure of packed libnv can cause an integer overflow, leading to the allocation of a smaller buffer than required for the parsed data.

An issue was discovered on Samsung mobile devices with M(6.x) and N(7.x) software. There is an Integer Overflow in process_M_SetTokenTUIPasswd during handling of a trusted application, leading to memory corruption. The Samsung IDs are SVE-2017-9008 and SVE-2017-9009 (October 2017).

An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.

An integer overflow exists in Mapbox's closed source gl-native library prior to version 10.6.1, which is bundled with multiple Mapbox products including open source libraries. The overflow is caused by large image height and width values when creating a new Image and allows for out of bounds writes, potentially crashing the Mapbox process.

TensorFlow is an open source platform for machine learning. Prior to versions 2.12.0 and 2.11.1, integer overflow occurs when `2^31 <= num_frames * height * width * channels < 2^32`, for example Full HD screencast of at least 346 frames. A fix is included in TensorFlow version 2.12.0 and version 2.11.1.

Solana solana_rbpf before 0.2.29 has an addition integer overflow via invalid ELF program headers. elf.rs has a panic via a malformed eBPF program.

Vapor is an HTTP web framework for Swift. Users of Vapor prior to version 4.60.3 with FileMiddleware enabled are vulnerable to an integer overflow vulnerability that can crash the application. Version 4.60.3 contains a patch for this issue. As a workaround, disable FileMiddleware and serve via a Content Delivery Network.

FISCO-BCOS release-3.0.0-rc2 was discovered to contain an issue where a malicious node can trigger an integer overflow and cause a Denial of Service (DoS) via an unusually large viewchange message packet.

FISCO-BCOS release-3.0.0-rc2 was discovered to contain an issue where a malicious node, via an invalid proposal with an invalid header, will cause normal nodes to stop producing new blocks and processing new clients' requests.

A flaw was found in Blender 3.3.0. An interger overflow in source/blender/blendthumb/src/blendthumb_extract.cc may lead to program crash or memory corruption.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain an integer overflow via the function dm_checkString. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.

Rat.SetString in math/big in Go before 1.16.14 and 1.17.x before 1.17.7 has an overflow that can lead to Uncontrolled Memory Consumption.

A program using swift-nio-http2 is vulnerable to a denial of service attack, caused by a network peer sending a specially crafted HPACK-encoded header block. This attack affects all swift-nio-http2 versions from 1.0.0 to 1.19.1. There are a number of implementation errors in the parsing of HPACK-encoded header blocks that allow maliciously crafted HPACK header blocks to cause crashes in processes using swift-nio-http2. Each of these crashes is triggered instead of an integer overflow. A malicious HPACK header block could be sent on any of the HPACK-carrying frames in a HTTP/2 connection (HEADERS and PUSH_PROMISE), at any position. Sending a HPACK header block does not require any special permission, so any HTTP/2 connection peer may send one. For clients, this means any server to which they connect may launch this attack. For servers, anyone they allow to connect to them may launch such an attack. The attack is low-effort: it takes very little resources to send an appropriately crafted field block. The impact on availability is high: receiving a frame carrying this field block immediately crashes the server, dropping all in-flight connections and causing the service to need to restart. It is straightforward for an attacker to repeatedly send appropriately crafted field blocks, so attackers require very few resources to achieve a substantial denial of service. The attack does not have any confidentiality or integrity risks in and of itself: swift-nio-http2 is parsing the field block in memory-safe code and the crash is triggered instead of an integer overflow. However, sudden process crashes can lead to violations of invariants in services, so it is possible that this attack can be used to trigger an error condition that has confidentiality or integrity risks. The risk can be mitigated if untrusted peers can be prevented from communicating with the service. This mitigation is not available to many services. The issue is fixed by rewriting the parsing code to correctly handle all conditions in the function. The principal issue was found by automated fuzzing by oss-fuzz, but several associated bugs in the same code were found by code audit and fixed at the same time

Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.

Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension().

The in-memory certificate cache in strongSwan before 5.9.4 has a remote integer overflow upon receiving many requests with different certificates to fill the cache and later trigger the replacement of cache entries. The code attempts to select a less-often-used cache entry by means of a random number generator, but this is not done correctly. Remote code execution might be a slight possibility.

A denial of service vulnerability exists in the netserver recv_command functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted network request can lead to a reboot. An attacker can send a malicious packet to trigger this vulnerability.

Integer overflow vulnerability in FFmpeg before n6.1, allows attackers to cause a denial of service (DoS) via the avcodec/osq module.