There is a command injection vulnerability in a mobile internet product of ZTE. Due to insufficient validation of SET_DEVICE_LED interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

ZTE's ZXMP M721 product has a permission and access control vulnerability. Since the folder permission viewed by sftp is 666, which is inconsistent with the actual permission. It’s easy for?users to?ignore the modification?of?the file permission configuration, so that low-authority accounts could actually obtain higher operating permissions on key files.

There is a configuration defect vulnerability in the version server of ZTE MF258K Pro products. Due to improper directory permission settings, an attacker can execute write permissions in a specific directory.

A ZTE product is impacted by an information leak vulnerability. An attacker could use this vulnerability to obtain the authentication password of the handheld terminal and access the device illegally for operation. This affects: ZXA10 eODN V2.3P2T1

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by command injection vulnerability. Due to insufficient parameter validation check, an authorized user can exploit this vulnerability to take control of user router system.

There is a permission and access control vulnerability of ZTE's ZXV10 XT802/ET301 product.Attackers with common permissions can log in the terminal web and change the password of the administrator illegally by intercepting requests to change the passwords.

ZTE NH8091 product has an improper permission control vulnerability. Due to improper permission control of the Web module interface, an authenticated attacker may exploit the vulnerability to execute arbitrary commands.

There is a command injection vulnerability in ZTE MF258 Pro product. Due to insufficient validation of Ping Diagnosis interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

There is a SQL injection vulnerability in ZTE MF286R. Due to insufficient validation of the input parameters of the phonebook interface, an authenticated attacker could use the vulnerability to execute arbitrary SQL injection.

There is a command injection vulnerability in ZTE MF286R, Due to insufficient validation of the input parameters, an attacker could use the vulnerability to execute arbitrary commands.

A vulnerability was found in TOTOLINK N150RT 3.4.0-B20190525. It has been rated as critical. This issue affects some unknown processing of the file /boafrm/formWsc. The manipulation of the argument localPin leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V4.0.1). The affected application do not properly validate input parameters in its REST API, resulting in improper handling of unexpected arguments. This could allow an authenticated attacker to execute arbitrary code with limited privileges.

HCL BigFix RunBookAI is affected by a Unvalidated Command Input / Potential Command Smuggling vulnerability. A flaw in a component's input handling was identified that could permit unauthorized command execution.

A vulnerability was found in JFinalCMS 1.0. It has been rated as critical. Affected by this issue is the function update of the file \src\main\java\com\cms\controller\admin\TemplateController.java of the component Template Handler. The manipulation of the argument content leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

OS Command Injection Remote Code Execution Vulnerability in UI in Progress ADC Products allows an authenticated attacker with “All” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in a custom WAF rule file during the file upload process.

A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An attacker with access to a Management Console user account with the editor role could escalate privileges through a command injection vulnerability in the Management Console. This vulnerability affected all versions of GitHub Enterprise Server and was fixed in versions 3.11.3, 3.10.5, 3.9.8, and 3.8.13 This vulnerability was reported via the GitHub Bug Bounty program.

A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A condition exists in FlashArray and FlashBlade Purity whereby a malicious user could execute arbitrary commands remotely through a specifically crafted SNMP configuration.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

A vulnerability classified as critical has been found in SevOne Network Management System up to 5.7.2.22. This affects the file traceroute.php of the Traceroute Handler. The manipulation leads to privilege escalation with a command injection. It is possible to initiate the attack remotely.

Improper Neutralization of Special Elements used in a Command vulnerability allows OS Command Injection.This issue affects Pandora FMS from 700 to 777.6

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

GoCD is a continuous delivery server. In GoCD versions prior to 22.1.0, it is possible for existing authenticated users who have permissions to edit or create pipeline materials or pipeline configuration repositories to get remote code execution capability on the GoCD server via configuring a malicious branch name which abuses Mercurial hooks/aliases to exploit a command injection weakness. An attacker would require access to an account with existing GoCD administration permissions to either create/edit (`hg`-based) configuration repositories; create/edit pipelines and their (`hg`-based) materials; or, where "pipelines-as-code" configuration repositories are used, to commit malicious configuration to such an external repository which will be automatically parsed into a pipeline configuration and (`hg`) material definition by the GoCD server. This issue is fixed in GoCD 22.1.0. As a workaround, users who do not use/rely upon Mercurial materials can uninstall/remove the `hg`/Mercurial binary from the underlying GoCD Server operating system or Docker image.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBS40V before 2.6.1.4, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Realtek rtl819x-SDK before v3.6.1 allows command injection over the web interface.

NETGEAR DGN2200v1 devices before v1.0.0.58 are affected by command injection.

The [`tj-actions/verify-changed-files`](https://github.com/tj-actions/verify-changed-files) action allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. The [`verify-changed-files`](https://github.com/tj-actions/verify-changed-files) workflow returns the list of files changed within a workflow execution. This could potentially allow filenames that contain special characters such as `;` which can be used by an attacker to take over the [GitHub Runner](https://docs.github.com/en/actions/using-github-hosted-runners/about-github-hosted-runners) if the output value is used in a raw fashion (thus being directly replaced before execution) inside a `run` block. By running custom commands, an attacker may be able to steal secrets such as `GITHUB_TOKEN` if triggered on other events than `pull_request`. This has been patched in versions [17](https://github.com/tj-actions/verify-changed-files/releases/tag/v17) and [17.0.0](https://github.com/tj-actions/verify-changed-files/releases/tag/v17.0.0) by enabling `safe_output` by default and returning filename paths escaping special characters for bash environments.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.2.5.3145 build 20250526 and later QuTS hero h5.2.5.3138 build 20250519 and later

The cbis_manager Podman container is vulnerable to remote command execution via the /api/plugins endpoint. Improper sanitization of the HTTP Headers X-FILENAME, X-PAGE, and X-FIELD allows for command injection. These headers are directly utilized within the subprocess.Popen Python function without adequate validation, enabling a remote attacker to execute arbitrary commands on the underlying system by crafting malicious header values within an HTTP request to the affected endpoint. The web service executes with root privileges within the container environment, the demonstrated remote code execution permits an attacker to acquire elevated privileges for the command execution. Restricting access to the management network with an external firewall can partially mitigate this risk.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

An issue was discovered in Relyum RELY-PCIe 22.2.1 and RELY-REC 23.1.0 devices, allowing authenticated command injection through the web interface.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

The Pods – Custom Content Types and Fields plugin for WordPress is vulnerable to Remote Code Exxecution via shortcode in all versions up to, and including, 3.0.10 (with the exception of 2.7.31.2, 2.8.23.2, 2.9.19.2). This makes it possible for authenticated attackers, with contributor level access or higher, to execute code on the server.

Mingyu Security Gateway before v3.0-5.3p was discovered to contain a remote command execution (RCE) vulnerability via the log_type parameter at /log/fw_security.mds.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 and 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access via the webservice. This is also known as OSFOURK-24120.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the daretools binary functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in rconfig “date” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.