Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible.

hb-ot-layout-gsubgpos.hh in HarfBuzz through 6.0.0 allows attackers to trigger O(n^2) growth via consecutive marks during the process of looking back for base glyphs when attaching marks.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Crafted modbus traffic can lead to unlimited resource accumulation within a flow. Upgrade to 7.0.6. Set a limited stream.reassembly.depth to reduce the issue.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

An Insufficient Algorithmic Complexity combined with an Allocation of Resources Without Limits or Throttling vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series and MX Series with SPC3 allows an unauthenticated network attacker to cause latency in transit packet processing and even packet loss. If transit traffic includes a significant percentage (> 5%) of fragmented packets which need to be reassembled, high latency or packet drops might be observed. This issue affects Juniper Networks Junos OS on SRX Series, MX Series with SPC3: All versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2-S9, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2.

In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

Pimcore is an Open Source Data & Experience Management Platform. The Pimcore thumbnail generation can be used to flood the server with large files. By changing the file extension or scaling factor of the requested thumbnail, attackers can create files that are much larger in file size than the original. This vulnerability is fixed in 11.2.4.

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2.

rizin before Release v0.6.3 is vulnerable to Uncontrolled Resource Consumption via bin_pe_parse_imports, Pe_r_bin_pe_parse_var, and estimate_slide.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

A vulnerability in IP ingress packet processing of the Cisco Embedded Wireless Controller with Catalyst Access Points Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device may experience a performance degradation in traffic processing or high CPU usage prior to the unexpected reload. This vulnerability is due to improper rate limiting of IP packets to the management interface. An attacker could exploit this vulnerability by sending a steady stream of IP traffic at a high rate to the management interface of the affected device. A successful exploit could allow the attacker to cause the device to reload.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the fid parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.

A vulnerability in the connection handling function in Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper traffic handling when platform limits are reached. An attacker could exploit this vulnerability by sending a high rate of UDP traffic through an affected device. A successful exploit could allow the attacker to cause all new, incoming connections to be dropped, resulting in a DoS condition.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

User-controlled operations could have allowed Denial of Service in M-Files Server before 23.4.12528.1 due to uncontrolled memory consumption.

Varnish Cache before 7.3.2 and 7.4.x before 7.4.3 (and before 6.0.13 LTS), and Varnish Enterprise 6 before 6.0.12r6, allows credits exhaustion for an HTTP/2 connection control flow window, aka a Broke Window Attack.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

Some products have the double fetch vulnerability. Successful exploitation of this vulnerability may cause denial of service (DoS) attacks to the kernel.

Configuration defects in the secure OS module.Successful exploitation of this vulnerability will affect availability.

A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from 16.11 prior to 16.11.2. It was possible for an attacker to cause a denial of service by crafting unusual search terms for branch names.

Cosign provides code signing and transparency for containers and binaries. Prior to version 2.2.4, maliciously-crafted software artifacts can cause denial of service of the machine running Cosign thereby impacting all services on the machine. The root cause is that Cosign creates slices based on the number of signatures, manifests or attestations in untrusted artifacts. As such, the untrusted artifact can control the amount of memory that Cosign allocates. The exact issue is Cosign allocates excessive memory on the lines that creates a slice of the same length as the manifests. Version 2.2.4 contains a patch for the vulnerability.

LibHTP is a security-aware parser for the HTTP protocol and the related bits and pieces. Version 0.5.46 may parse malformed request traffic, leading to excessive CPU usage. Version 0.5.47 contains a patch for the issue. No known workarounds are available.

IBM WebSphere Application Server Liberty 18.0.0.2 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 284574.

The Linux kernel NFSD implementation prior to versions 5.19.17 and 6.0.2 are vulnerable to buffer overflow. NFSD tracks the number of pages held by each NFSD thread by combining the receive and send buffers of a remote procedure call (RPC) into a single array of pages. A client can force the send buffer to shrink by sending an RPC message over TCP with garbage data added at the end of the message. The RPC message with garbage data is still correctly formed according to the specification and is passed forward to handlers. Vulnerable code in NFSD is not expecting the oversized request and writes beyond the allocated buffer space. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

HTTP/2 incoming headers exceeding the limit are temporarily buffered in nghttp2 in order to generate an informative HTTP 413 response. If a client does not stop sending headers, this leads to memory exhaustion.

socket.io-parser before 3.4.1 allows attackers to cause a denial of service (memory consumption) via a large packet because a concatenation approach is used.

Docker Registry before 2.6.2 in Docker Distribution does not properly restrict the amount of content accepted from a user, which allows remote attackers to cause a denial of service (memory consumption) via the manifest endpoint.

A vulnerability has been identified in SIMATIC CP 1242-7 V2 (6GK7242-7KX31-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 (6GK7243-1BX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-1 DNP3 (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-1 IEC (incl. SIPLUS variants) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE EU (6GK7243-7KX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-7 LTE US (6GK7243-7SX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1243-8 IRC (6GK7243-8RX30-0XE0) (All versions < V3.4.29), SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE0) (All versions < V3.3), SIMATIC CP 443-1 (6GK7443-1EX30-0XE1) (All versions < V3.3), SIMATIC CP 443-1 Advanced (6GK7443-1GX30-0XE0) (All versions < V3.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS NET CP 1242-7 V2 (6AG1242-7KX31-7XE0) (All versions < V3.4.29), SIPLUS NET CP 443-1 (6AG1443-1EX30-4XE0) (All versions < V3.3), SIPLUS NET CP 443-1 Advanced (6AG1443-1GX30-4XE0) (All versions < V3.3), SIPLUS S7-1200 CP 1243-1 (6AG1243-1BX30-2AX0) (All versions < V3.4.29), SIPLUS S7-1200 CP 1243-1 RAIL (6AG2243-1BX30-1XE0) (All versions < V3.4.29), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.3.6), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.3.6). The webserver of the affected products contains a vulnerability that may lead to a denial of service condition. An attacker may cause a denial of service situation of the webserver of the affected product.

Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/lib/gssapi/krb5/k5sealv3.c.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. It's possible to make XWiki create many new schemas and fill them with tables just by using a crafted user identifier in the login form. This may lead to degraded database performance. The problem has been patched in XWiki 13.10.8, 14.6RC1 and 14.4.2. Users are advised to upgrade. There are no known workarounds for this issue.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can exhaust router's thread pool, rendering it inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

A Memory Allocation with Excessive Size Value vulnerablity in the TEE_Realloc function in Samsung mTower through 0.3.0 allows a trusted application to trigger a Denial of Service (DoS) by invoking the function TEE_Realloc with an excessive number for the parameter len.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

Jetty is a Java based web server and servlet engine. An HTTP/2 SSL connection that is established and TCP congested will be leaked when it times out. An attacker can cause many connections to end up in this state, and the server may run out of file descriptors, eventually causing the server to stop accepting new connections from valid clients. The vulnerability is patched in 9.4.54, 10.0.20, 11.0.20, and 12.0.6.