A vulnerability exists where a low-privileged user can exploit insufficient permissions in credential handling to leak NTLM hashes of saved credentials. The exploitation involves using retrieved credentials to expose sensitive NTLM hashes, impacting systems beyond the initial target and potentially leading to broader security vulnerabilities.

A vulnerability in Veeam ONE allows a user with the Veeam ONE Read-Only User role to view the Dashboard Schedule. Note: The criticality of this vulnerability is reduced because the user with the Read-Only role is only able to view the schedule and cannot make changes.

Veeam Backup Enterprise Manager allows unauthenticated users to log in as any user to enterprise manager web interface.

Vulnerability CVE-2024-22021 allows a Veeam Recovery Orchestrator user with a low privileged role (Plan Author) to retrieve plans from a Scope other than the one they are assigned to.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of VEEAM One Agent 9.5.4.4587. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HandshakeResult method. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-10401.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of VEEAM One Agent 9.5.4.4587. Authentication is not required to exploit this vulnerability. The specific flaw exists within the PerformHandshake method. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-10400.

A deserialization of untrusted data vulnerability with a malicious payload can allow an unauthenticated remote code execution (RCE).

A vulnerability in Veeam Backup & Replication allows users with certain operator roles to expose saved credentials by leveraging a combination of methods in a remote management interface. This can be achieved using a session object that allows for credential enumeration and exploitation, leading to the leak of plaintext credentials to a malicious host. The attack is facilitated by improper usage of a method that allows operators to add a new host with an attacker-controlled IP, enabling them to retrieve sensitive credentials in plaintext.

A series of related high-severity vulnerabilities, the most notable enabling remote code execution (RCE) as the service account and extraction of sensitive information (savedcredentials and passwords). Exploiting these vulnerabilities requires a user who has been assigned a low-privileged role within Veeam Backup & Replication.

Cleartext password storage exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The files in question are /etc/waipass and /etc/roapass. In case one of these devices is compromised, the attacker can gain access to passwords and abuse them to compromise further systems.

Linear eMerge E3-Series devices have Cleartext Credentials in a Database.

On Wireless IP Camera (P2P) WIFICAM devices, access to .ini files (containing credentials) is not correctly checked. An attacker can bypass authentication by providing an empty loginuse parameter and an empty loginpas parameter in the URI.

An issue was discovered on Humax Digital HG100R 2.0.6 devices. To download the backup file it's not necessary to use credentials, and the router credentials are stored in plaintext inside the backup, aka GatewaySettings.bin.

In ABB IP GATEWAY 3.39 and prior, some configuration files contain passwords stored in plain-text, which may allow an attacker to gain unauthorized access.

A Plaintext Storage of a Password issue was discovered in Moxa OnCell G3110-HSPA Version 1.3 build 15082117 and previous versions, OnCell G3110-HSDPA Version 1.2 Build 09123015 and previous versions, OnCell G3150-HSDPA Version 1.4 Build 11051315 and previous versions, OnCell 5104-HSDPA, OnCell 5104-HSPA, and OnCell 5004-HSPA. The application's configuration file contains parameters that represent passwords in plaintext.

A Weak Cryptography for Passwords issue was discovered in General Electric (GE) Multilin SR 750 Feeder Protection Relay, firmware versions prior to Version 7.47; SR 760 Feeder Protection Relay, firmware versions prior to Version 7.47; SR 469 Motor Protection Relay, firmware versions prior to Version 5.23; SR 489 Generator Protection Relay, firmware versions prior to Version 4.06; SR 745 Transformer Protection Relay, firmware versions prior to Version 5.23; SR 369 Motor Protection Relay, all firmware versions; Multilin Universal Relay, firmware Version 6.0 and prior versions; and Multilin URplus (D90, C90, B95), all versions. Ciphertext versions of user passwords were created with a non-random initialization vector leaving them susceptible to dictionary attacks. Ciphertext of user passwords can be obtained from the front LCD panel of affected products and through issued Modbus commands.

An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-1-02-08 and prior. Password is stored in clear text.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.

An issue was discovered in portier vision 4.4.4.2 and 4.4.4.6. Passwords are stored using reversible encryption rather than as a hash value, and the used Vigenere algorithm is badly outdated. Moreover, the encryption key is static and too short. Due to this, the passwords stored by the application can be easily decrypted.

A insufficiently protected credentials in Fortinet FortiSDNConnector version 1.1.7 and below allows attacker to disclose third-party devices credential information via configuration page lookup.

Fuji Electric V-Server before 6.0.33.0 stores database credentials in project files as plaintext. An attacker that can gain access to the project file can recover the database credentials and gain access to the database server.

Jenkins Telegram Bot Plugin 1.4.0 and earlier stores the Telegram Bot token unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

Lexmark Scan To Network (SNF) 3.2.9 and earlier stores network configuration credentials in plaintext and transmits them in requests, which allows remote attackers to obtain sensitive information via requests to (1) cgi-bin/direct/printer/prtappauth/apps/snfDestServlet or (2) cgi-bin/direct/printer/prtappauth/apps/ImportExportServlet.

An information leak exists in Wanscam's HW0021 network camera that allows an unauthenticated remote attacker to recover the administrator username and password via an ONVIF GetSnapshotUri request.

An exposure of sensitive information to an unauthorized actor [CWE-200] in FortiSIEM version 7.0.0 and before 6.7.5 may allow an attacker with access to windows agent logs to obtain the windows agent password via searching through the logs.

The HTTP client in Gradle before 5.6 sends authentication credentials originally destined for the configured host. If that host returns a 30x redirect, Gradle also sends those credentials to all subsequent hosts that the request redirects to. This is similar to CVE-2018-1000007.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. Sensitive Credentials data is transmitted in cleartext.

An issue was discovered in AUO Solar Data Recorder before 1.3.0. The web portal uses HTTP Basic Authentication and provides the account and password in the WWW-Authenticate attribute. By using this account and password, anyone can login successfully.

The SSH Plugin stores credentials which allow jobs to access remote servers via the SSH protocol. User passwords and passphrases for encrypted SSH keys are stored in plaintext in a configuration file.

CloudBees Jenkins Operations Center 2.150.2.3, when an expired trial license exists, allows Cleartext Password Storage and Retrieval via the proxy configuration page.

TeamPass version 2.1.27 and earlier contains a Storing Passwords in a Recoverable Format vulnerability in Shared password vaults that can result in all shared passwords are recoverable server side. This attack appears to be exploitable via any vulnerability that can bypass authentication or role assignment and can lead to shared password leakage.

Aquaverde GmbH Aquarius CMS prior to version 4.1.1 is affected by: Incorrect Access Control. The impact is: The access to the log file is not restricted. It contains sensitive information like passwords etc. The component is: log file. The attack vector is: open the file.

A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.

A cleartext password storage issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. The file in question is /usr/local/ipsca/mipsca.db. If a camera is compromised, the attacker can gain access to passwords and abuse them to compromise further systems.

If an attacker has access to the firmware from the VGo Robot (Versions 3.0.3.52164 and 3.0.3.53662. Prior versions may also be affected) they may be able to extract credentials.

Echelon SmartServer 1 all versions, SmartServer 2 all versions prior to release 4.11.007, i.LON 100 all versions, and i.LON 600 all versions. The devices store passwords in plaintext, which may allow an attacker with access to the configuration file to log into the SmartServer web user interface.

Jenkins Code Dx Plugin 3.1.0 and earlier does not mask Code Dx server API keys displayed on the configuration form, increasing the potential for attackers to observe and capture them.

Jenkins Code Dx Plugin 3.1.0 and earlier stores Code Dx server API keys unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

In the web application in BeaconMedaes TotalAlert Scroll Medical Air Systems running software versions prior to 4107600010.23, passwords are presented in plaintext in a file that is accessible without authentication.

Dynacolor FCM-MB40 v1.2.0.0 use /etc/appWeb/appweb.pass to store administrative web-interface credentials in cleartext. These credentials can be retrieved via cgi-bin/getuserinfo.cgi?mode=info.

CastleNet CBV38Z4EC 125.553mp1.39219mp1.899.007, CBV38Z4ECNIT 125.553mp1.39219mp1.899.005ITT, CBW383G4J 37.556mp5.008, and CBW38G4J 37.553mp1.008 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

NETWAVE MNG6200 C4835805jrc12FU121413.cpr devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Zoom 5352 v5.5.8.6Y devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Technicolor DPC3928SL D3928SL-PSIP-13-A010-c3420r55105-170214a devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests.

Technicolor TC7110.B STC8.62.02 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests.

Insecure Cryptographic Storage of credentials in com.vestiacom.qbeecamera_preferences.xml in the QBee Cam application through 1.0.5 for Android allows an attacker to retrieve the username and password.

Technicolor TC7200.TH2v2 SC05.00.22 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests.

Thomson DWG849 STC0.01.16, DWG850-4 ST9C.05.25, DWG855 ST80.20.26, and TWG870 STB2.01.36 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Bnmux BCW700J 5.20.7, BCW710J 5.30.6a, and BCW710J2 5.30.16 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.