There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

A remote code execution (RCE) vulnerability exists in the parisneo/lollms-webui, specifically within the 'open_file' module, version 9.5. The vulnerability arises due to improper neutralization of special elements used in a command within the 'open_file' function. An attacker can exploit this vulnerability by crafting a malicious file path that, when processed by the 'open_file' function, executes arbitrary system commands or reads sensitive file content. This issue is present in the code where subprocess.Popen is used unsafely to open files based on user-supplied paths without adequate validation, leading to potential command injection.

A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

Tenda FH451 v1.0.0.9 has a command injection vulnerability in the formexeCommand function i

Command Injection in GitHub repository thorsten/phpmyfaq prior to 3.1.11.

A vulnerability has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6 and classified as critical. Affected by this vulnerability is an unknown functionality of the component OSPF Handler. The manipulation of the argument area leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The associated identifier of this vulnerability is VDB-223303. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Improper Input Validation vulnerability in ABB Ltd. ASPECT®-Enterprise on ASPECT®-Enterprise, Linux (2CQG103201S3021, 2CQG103202S3021, 2CQG103203S3021, 2CQG103204S3021 modules), ABB Ltd. NEXUS Series on NEXUS Series, Linux (2CQG100102R2021, 2CQG100104R2021, 2CQG100105R2021, 2CQG100106R2021, 2CQG100110R2021, 2CQG100112R2021, 2CQG100103R2021, 2CQG100107R2021, 2CQG100108R2021, 2CQG100109R2021, 2CQG100111R2021, 2CQG100113R2021 modules), ABB Ltd. MATRIX Series on MATRIX Series, Linux (2CQG100102R1021, 2CQG100103R1021, 2CQG100104R1021, 2CQG100105R1021, 2CQG100106R1021 modules) allows Command Injection.This issue affects ASPECT®-Enterprise: from 3.0;0 before 3.07.0; NEXUS Series: from 3.0;0 before 3.07.0; MATRIX Series: from 3.0;0 before 3.07.1.

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

An unauthorized command injection vulnerability exists in the ActionLogin function of the webman.lua file in Ikuai router OS through 3.7.1.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a command insertion vulnerability in setDiagnosisCfg.This vulnerability allows an attacker to execute arbitrary commands through the "ip" parameter.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_week_value` POST parameter.

FOG is a cloning/imaging/rescue suite/inventory management system. Prior to 1.5.10.34, packages/web/lib/fog/reportmaker.class.php in FOG was affected by a command injection via the filename parameter to /fog/management/export.php. This vulnerability is fixed in 1.5.10.34.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the mp function in /bin/webs without any limitations.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

Mocodo Mocodo Online 4.2.6 and below does not properly sanitize the sql_case input field in /web/generate.php, allowing remote attackers to execute arbitrary commands and potentially command injection, leading to remote code execution (RCE) under certain conditions.

Sourcecodester Poultry Farm Management System v1.0 contains an Unauthenticated Remote Code Execution (RCE) vulnerability via the productimage parameter at /farm/product.php.

A command injection vulnerability has been identified in Atos Unify OpenScape 4000 Assistant and Unify OpenScape 4000 Manager (8 before R2.22.18, 10 before 0.28.13, and 10 R1 before R1.34.4) that may allow an unauthenticated attacker to upload arbitrary files and achieve administrative access to the system.

A command injection vulnerability exists in Jitsi before commit 8aa7be58522f4264078d54752aae5483bfd854b2 when launching browsers on Windows which could allow an attacker to insert an arbitrary URL which opens up the opportunity to remote execution.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 5.0.0.

Nanoleaf Desktop App before v1.3.1 was discovered to contain a command injection vulnerability which is exploited via a crafted HTTP request.

Diagnosis Controller miss parameter validation, so user may attacked by command injection via HTTP Request.

GPT-SoVITS-WebUI is a voice conversion and text-to-speech webUI. In versions 20250228v3 and prior, there is a command injection vulnerability in webui.py open_denoise function. denoise_inp_dir and denoise_opt_dir take user input, which is passed to the open_denoise function, which concatenates the user input into a command and runs it on the server, leading to arbitrary command execution. At time of publication, no known patched versions are available.

D-Link DIR-3040 device with firmware 120B03 was discovered to contain a command injection vulnerability via the SetTriggerLEDBlink function.

xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.

An issue was discovered in Anyka Microelectronics AK3918EV300 MCU v18. A command injection vulnerability in the network configuration script within the MCU's operating system allows attackers to perform arbitrary command execution via a crafted wifi SSID or password.

Alarm instance management has command injection when there is a specific command configured. It is only for logged-in users. We recommend you upgrade to version 2.0.6 or higher

D-Link DIR-823G v1.0.2 was found to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via a crafted packet.

GPT-SoVITS-WebUI is a voice conversion and text-to-speech webUI. In versions 20250228v3 and prior, there is a command injection vulnerability in webui.py open_asr function. asr_inp_dir (and a number of other variables) takes user input, which is passed to the open_asr function, which concatenates the user input into a command and runs it on the server, leading to arbitrary command execution. At time of publication, no known patched versions are available.

IP-COM EW9 V15.11.0.14(9732) was discovered to contain a command injection vulnerability in the formSetDebugCfg function.

NETGEAR has released fixes for a pre-authentication command injection in request_handler.php security vulnerability on the following product models: WC7500, running firmware versions prior to 6.5.3.5; WC7520, running firmware versions prior to 2.5.0.46; WC7600v1, running firmware versions prior to 6.5.3.5; WC7600v2, running firmware versions prior to 6.5.3.5; and WC9500, running firmware versions prior to 6.5.3.5.

Array Networks AG/vxAG with ArrayOS AG before 9.4.0.469 allows unauthenticated command injection that leads to privilege escalation and control of the system. NOTE: ArrayOS AG 10.x is unaffected.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

Python Software Foundation Python (CPython) version 2.7 contains a CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in shutil module (make_archive function) that can result in Denial of service, Information gain via injection of arbitrary files on the system or entire drive. This attack appear to be exploitable via Passage of unfiltered user input to the function. This vulnerability appears to have been fixed in after commit add531a1e55b0a739b0f42582f1c9747e5649ace.

The `Release PR Merged` workflow in the github repo taosdata/grafanaplugin is subject to a command injection vulnerability which allows for arbitrary code execution within the github action context due to the insecure usage of `${{ github.event.pull_request.title }}` in a bash command within the GitHub workflow. Attackers can inject malicious commands which will be executed by the workflow. This happens because `${{ github.event.pull_request.title }}` is directly passed to bash command on like 25 of the workflow. This may allow an attacker to gain access to secrets which the github action has access to or to otherwise make use of the compute resources.

There is a command injection vulnerability using environment variables in Bitbucket Server and Data Center. An attacker with permission to control their username can exploit this issue to execute arbitrary code on the system. This vulnerability can be unauthenticated if the Bitbucket Server and Data Center instance has enabled “Allow public signup”.

This command injection vulnerability in Music Station allows attackers to execute commands on the affected device. To fix the vulnerability, QNAP recommend updating Music Station to their latest versions.