In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated.

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: use old 'nbands' while purging unused classes Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify() after recent changes from Lion [2]. The problem is: in ets_qdisc_change() we purge unused DWRR queues; the value of 'q->nbands' is the new one, and the cleanup should be done with the old one. The problem is here since my first attempts to fix ets_qdisc_change(), but it surfaced again after the recent qdisc len accounting fixes. Fix it purging idle DWRR queues before assigning a new value of 'q->nbands', so that all purge operations find a consistent configuration: - old 'q->nbands' because it's needed by ets_class_find() - old 'q->nstrict' because it's needed by ets_class_is_strict() BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary) Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021 RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80 Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab RSP: 0018:ffffba186009f400 EFLAGS: 00010202 RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004 RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004 R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000 R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000 FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ets_class_qlen_notify+0x65/0x90 [sch_ets] qdisc_tree_reduce_backlog+0x74/0x110 ets_qdisc_change+0x630/0xa40 [sch_ets] __tc_modify_qdisc.constprop.0+0x216/0x7f0 tc_modify_qdisc+0x7c/0x120 rtnetlink_rcv_msg+0x145/0x3f0 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x245/0x390 netlink_sendmsg+0x21b/0x470 ____sys_sendmsg+0x39d/0x3d0 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x7d/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f2155114084 Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084 RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003 RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0 R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0 </TASK> [1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: w7090p: fix null-ptr-deref in w7090p_tuner_write_serpar and w7090p_tuner_read_serpar In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add check on msg[0].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file() When the volume header contains erroneous values that do not reflect the actual state of the filesystem, hfsplus_fill_super() assumes that the attributes file is not yet created, which later results in hitting BUG_ON() when hfsplus_create_attributes_file() is called. Replace this BUG_ON() with -EIO error with a message to suggest running fsck tool.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent infinite loop in rt6_nlmsg_size() While testing prior patch, I was able to trigger an infinite loop in rt6_nlmsg_size() in the following place: list_for_each_entry_rcu(sibling, &f6i->fib6_siblings, fib6_siblings) { rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len); } This is because fib6_del_route() and fib6_add_rt2node() uses list_del_rcu(), which can confuse rcu readers, because they might no longer see the head of the list. Restart the loop if f6i->fib6_nsiblings is zero.

In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on unexpected eb generation at btrfs_copy_root() If we find an unexpected generation for the extent buffer we are cloning at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the transaction, meaning we allow to persist metadata with an unexpected generation. Instead of warning only, abort the transaction and return -EUCLEAN.

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Make EEH driver device hotplug safe Multiple race conditions existed between the PCIe hotplug driver and the EEH driver, leading to a variety of kernel oopses of the same general nature: <pcie device unplug> <eeh driver trigger> <hotplug removal trigger> <pcie tree reconfiguration> <eeh recovery next step> <oops in EEH driver bus iteration loop> A second class of oops is also seen when the underlying bus disappears during device recovery. Refactor the EEH module to be PCI rescan and remove safe. Also clean up a few minor formatting / readability issues.

In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL pointer dereference in UTF16 conversion There can be a NULL pointer dereference bug here. NULL is passed to __cifs_sfu_make_node without checks, which passes it unchecked to cifs_strndup_to_utf16, which in turn passes it to cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash. This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and returns NULL early to prevent dereferencing NULL pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE

In the Linux kernel, the following vulnerability has been resolved: drm/hisilicon/hibmc: fix the hibmc loaded failed bug When hibmc loaded failed, the driver use hibmc_unload to free the resource, but the mutexes in mode.config are not init, which will access an NULL pointer. Just change goto statement to return, because hibnc_hw_init() doesn't need to free anything.

In the Linux kernel, the following vulnerability has been resolved: MIPS: Don't crash in stack_top() for tasks without ABI or vDSO Not all tasks have an ABI associated or vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL ABI pointer and crash. This can for example happen when using kunit: mips_stack_top+0x28/0xc0 arch_pick_mmap_layout+0x190/0x220 kunit_vm_mmap_init+0xf8/0x138 __kunit_add_resource+0x40/0xa8 kunit_vm_mmap+0x88/0xd8 usercopy_test_init+0xb8/0x240 kunit_try_run_case+0x5c/0x1a8 kunit_generic_run_threadfn_adapter+0x28/0x50 kthread+0x118/0x240 ret_from_kernel_thread+0x14/0x1c Only dereference the ABI point if it is set. The GIC page is also included as it is specific to the vDSO. Also move the randomization adjustment into the same conditional.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel, the following vulnerability has been resolved: benet: fix BUG when creating VFs benet crashes as soon as SRIOV VFs are created: kernel BUG at mm/vmalloc.c:3457! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary) [...] RIP: 0010:vunmap+0x5f/0x70 [...] Call Trace: <TASK> __iommu_dma_free+0xe8/0x1c0 be_cmd_set_mac_list+0x3fe/0x640 [be2net] be_cmd_set_mac+0xaf/0x110 [be2net] be_vf_eth_addr_config+0x19f/0x330 [be2net] be_vf_setup+0x4f7/0x990 [be2net] be_pci_sriov_configure+0x3a1/0x470 [be2net] sriov_numvfs_store+0x20b/0x380 kernfs_fop_write_iter+0x354/0x530 vfs_write+0x9b9/0xf60 ksys_write+0xf3/0x1d0 do_syscall_64+0x8c/0x3d0 be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh. Fix it by freeing only after the lock has been released.

In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc() In the error paths after fb_info structure is successfully allocated, the memory allocated in fb_deferred_io_init() for info->pagerefs is not freed. Fix that by adding the cleanup function on the error path.

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region() In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res.

In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: nvdec: Fix dma_alloc_coherent error check Check for NULL return value with dma_alloc_coherent, in line with Robin's fix for vic.c in 'drm/tegra: vic: Fix DMA API misuse'.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue since it may return NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid panic in f2fs_evict_inode As syzbot [1] reported as below: R10: 0000000000000100 R11: 0000000000000206 R12: 00007ffe17473450 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> ---[ end trace 0000000000000000 ]--- ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 Read of size 8 at addr ffff88812d962278 by task syz-executor/564 CPU: 1 PID: 564 Comm: syz-executor Tainted: G W 6.1.129-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack+0x21/0x24 lib/dump_stack.c:88 dump_stack_lvl+0xee/0x158 lib/dump_stack.c:106 print_address_description+0x71/0x210 mm/kasan/report.c:316 print_report+0x4a/0x60 mm/kasan/report.c:427 kasan_report+0x122/0x150 mm/kasan/report.c:531 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 __list_del_entry include/linux/list.h:134 [inline] list_del_init include/linux/list.h:206 [inline] f2fs_inode_synced+0xf7/0x2e0 fs/f2fs/super.c:1531 f2fs_update_inode+0x74/0x1c40 fs/f2fs/inode.c:585 f2fs_update_inode_page+0x137/0x170 fs/f2fs/inode.c:703 f2fs_write_inode+0x4ec/0x770 fs/f2fs/inode.c:731 write_inode fs/fs-writeback.c:1460 [inline] __writeback_single_inode+0x4a0/0xab0 fs/fs-writeback.c:1677 writeback_single_inode+0x221/0x8b0 fs/fs-writeback.c:1733 sync_inode_metadata+0xb6/0x110 fs/fs-writeback.c:2789 f2fs_sync_inode_meta+0x16d/0x2a0 fs/f2fs/checkpoint.c:1159 block_operations fs/f2fs/checkpoint.c:1269 [inline] f2fs_write_checkpoint+0xca3/0x2100 fs/f2fs/checkpoint.c:1658 kill_f2fs_super+0x231/0x390 fs/f2fs/super.c:4668 deactivate_locked_super+0x98/0x100 fs/super.c:332 deactivate_super+0xaf/0xe0 fs/super.c:363 cleanup_mnt+0x45f/0x4e0 fs/namespace.c:1186 __cleanup_mnt+0x19/0x20 fs/namespace.c:1193 task_work_run+0x1c6/0x230 kernel/task_work.c:203 exit_task_work include/linux/task_work.h:39 [inline] do_exit+0x9fb/0x2410 kernel/exit.c:871 do_group_exit+0x210/0x2d0 kernel/exit.c:1021 __do_sys_exit_group kernel/exit.c:1032 [inline] __se_sys_exit_group kernel/exit.c:1030 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030 x64_sys_call+0x7b4/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 RIP: 0033:0x7f28b1b8e169 Code: Unable to access opcode bytes at 0x7f28b1b8e13f. RSP: 002b:00007ffe174710a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f28b1c10879 RCX: 00007f28b1b8e169 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000002 R08: 00007ffe1746ee47 R09: 00007ffe17472360 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffe17472360 R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520 </TASK> Allocated by task 569: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_alloc_info+0x25/0x30 mm/kasan/generic.c:505 __kasan_slab_alloc+0x72/0x80 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook+0x4f/0x2c0 mm/slab.h:737 slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x104/0x220 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3245 [inline] f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419 alloc_inode fs/inode.c:261 [inline] iget_locked+0x186/0x880 fs/inode.c:1373 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483 f2fs_lookup+0x366/0xab0 fs/f2fs/namei.c:487 __lookup_slow+0x2a3/0x3d0 fs/namei.c:1690 lookup_slow+0x57/0x70 fs/namei.c:1707 walk_component+0x2e6/0x410 fs/namei ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid file types when reading inodes To prevent inodes with invalid file types from tripping through the vfs and causing malfunctions or assertion failures, add a missing sanity check when reading an inode from a block device. If the file type is not valid, treat it as a filesystem error.

In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization.

In the Linux kernel, the following vulnerability has been resolved: mm: slub: avoid wake up kswapd in set_track_prepare set_track_prepare() can incur lock recursion. The issue is that it is called from hrtimer_start_range_ns holding the per_cpu(hrtimer_bases)[n].lock, but when enabled CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare, and try to hold the per_cpu(hrtimer_bases)[n].lock. Avoid deadlock caused by implicitly waking up kswapd by passing in allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the debug_objects_fill_pool() case. Inside stack depot they are processed by gfp_nested_mask(). Since ___slab_alloc() has preemption disabled, we mask out __GFP_DIRECT_RECLAIM from the flags there. The oops looks something like: BUG: spinlock recursion on CPU#3, swapper/3/0 lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3 Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT) Call trace: spin_bug+0x0 _raw_spin_lock_irqsave+0x80 hrtimer_try_to_cancel+0x94 task_contending+0x10c enqueue_dl_entity+0x2a4 dl_server_start+0x74 enqueue_task_fair+0x568 enqueue_task+0xac do_activate_task+0x14c ttwu_do_activate+0xcc try_to_wake_up+0x6c8 default_wake_function+0x20 autoremove_wake_function+0x1c __wake_up+0xac wakeup_kswapd+0x19c wake_all_kswapds+0x78 __alloc_pages_slowpath+0x1ac __alloc_pages_noprof+0x298 stack_depot_save_flags+0x6b0 stack_depot_save+0x14 set_track_prepare+0x5c ___slab_alloc+0xccc __kmalloc_cache_noprof+0x470 __set_page_owner+0x2bc post_alloc_hook[jt]+0x1b8 prep_new_page+0x28 get_page_from_freelist+0x1edc __alloc_pages_noprof+0x13c alloc_slab_page+0x244 allocate_slab+0x7c ___slab_alloc+0x8e8 kmem_cache_alloc_noprof+0x450 debug_objects_fill_pool+0x22c debug_object_activate+0x40 enqueue_hrtimer[jt]+0xdc hrtimer_start_range_ns+0x5f8 ...

In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix NULL dereference on unbind due to stale coupling data Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can lead to NULL pointer dereference when regulators are accessed post-unbind. This can happen during runtime PM or other regulator operations that rely on coupling metadata. For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers a panic in regulator_lock_recursive() due to stale coupling state. Ensure n_coupled is set to 0 to prevent access to invalid pointers.

In the Linux kernel, the following vulnerability has been resolved: clk: davinci: Add NULL check in davinci_lpsc_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C) report a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. Add these 2 devices to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Kill URBs before clearing tx status queue In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb. BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211] Call Trace: <IRQ> rtl8187_tx_cb+0x116/0x150 [rtl8187] __usb_hcd_giveback_urb+0x9d/0x120 usb_giveback_urb_bh+0xbb/0x140 process_one_work+0x19b/0x3c0 bh_worker+0x1a7/0x210 tasklet_action+0x10/0x30 handle_softirqs+0xf0/0x340 __irq_exit_rcu+0xcd/0xf0 common_interrupt+0x85/0xa0 </IRQ> Tested on RTL8187BvE device. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: clk: xilinx: vcu: unregister pll_post only if registered correctly If registration of pll_post is failed, it will be set to NULL or ERR, unregistering same will fail with following call trace: Unable to handle kernel NULL pointer dereference at virtual address 008 pc : clk_hw_unregister+0xc/0x20 lr : clk_hw_unregister_fixed_factor+0x18/0x30 sp : ffff800011923850 ... Call trace: clk_hw_unregister+0xc/0x20 clk_hw_unregister_fixed_factor+0x18/0x30 xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu] xvcu_probe+0x2bc/0x53c [xlnx_vcu]

In the Linux kernel, the following vulnerability has been resolved: ax25: properly unshare skbs in ax25_kiss_rcv() Bernard Pidoux reported a regression apparently caused by commit c353e8983e0d ("net: introduce per netns packet chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without a major crash. But the root cause is that ax25_kiss_rcv() can queue/mangle input skb without checking if this skb is shared or not. Many thanks to Bernard Pidoux for his help, diagnosis and tests. We had a similar issue years ago fixed with commit 7aaed57c5c28 ("phonet: properly unshare skbs in phonet_rcv()").

In the Linux kernel, the following vulnerability has been resolved: hfsplus: remove mutex_lock check in hfsplus_free_extents Syzbot reported an issue in hfsplus filesystem: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4400 at fs/hfsplus/extents.c:346 hfsplus_free_extents+0x700/0xad0 Call Trace: <TASK> hfsplus_file_truncate+0x768/0xbb0 fs/hfsplus/extents.c:606 hfsplus_write_begin+0xc2/0xd0 fs/hfsplus/inode.c:56 cont_expand_zero fs/buffer.c:2383 [inline] cont_write_begin+0x2cf/0x860 fs/buffer.c:2446 hfsplus_write_begin+0x86/0xd0 fs/hfsplus/inode.c:52 generic_cont_expand_simple+0x151/0x250 fs/buffer.c:2347 hfsplus_setattr+0x168/0x280 fs/hfsplus/inode.c:263 notify_change+0xe38/0x10f0 fs/attr.c:420 do_truncate+0x1fb/0x2e0 fs/open.c:65 do_sys_ftruncate+0x2eb/0x380 fs/open.c:193 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd To avoid deadlock, Commit 31651c607151 ("hfsplus: avoid deadlock on file truncation") unlock extree before hfsplus_free_extents(), and add check wheather extree is locked in hfsplus_free_extents(). However, when operations such as hfsplus_file_release, hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed concurrently in different files, it is very likely to trigger the WARN_ON, which will lead syzbot and xfstest to consider it as an abnormality. The comment above this warning also describes one of the easy triggering situations, which can easily trigger and cause xfstest&syzbot to report errors. [task A] [task B] ->hfsplus_file_release ->hfsplus_file_truncate ->hfs_find_init ->mutex_lock ->mutex_unlock ->hfsplus_write_begin ->hfsplus_get_block ->hfsplus_file_extend ->hfsplus_ext_read_extent ->hfs_find_init ->mutex_lock ->hfsplus_free_extents WARN_ON(mutex_is_locked) !!! Several threads could try to lock the shared extents tree. And warning can be triggered in one thread when another thread has locked the tree. This is the wrong behavior of the code and we need to remove the warning.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix jump offset calculation in tailcall The extra pass of bpf_int_jit_compile() skips JIT context initialization which essentially skips offset calculation leaving out_offset = -1, so the jmp_offset in emit_bpf_tail_call is calculated by "#define jmp_offset (out_offset - (cur_offset))" is a negative number, which is wrong. The final generated assembly are as follow. 54: bgeu $a2, $t1, -8 # 0x0000004c 58: addi.d $a6, $s5, -1 5c: bltz $a6, -16 # 0x0000004c 60: alsl.d $t2, $a2, $a1, 0x3 64: ld.d $t2, $t2, 264 68: beq $t2, $zero, -28 # 0x0000004c Before apply this patch, the follow test case will reveal soft lock issues. cd tools/testing/selftests/bpf/ ./test_progs --allow=tailcalls/tailcall_bpf2bpf_1 dmesg: watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056]

In the Linux kernel, the following vulnerability has been resolved: PCI: pnv_php: Fix surprise plug detection and recovery The existing PowerNV hotplug code did not handle surprise plug events correctly, leading to a complete failure of the hotplug system after device removal and a required reboot to detect new devices. This comes down to two issues: 1) When a device is surprise removed, often the bridge upstream port will cause a PE freeze on the PHB. If this freeze is not cleared, the MSI interrupts from the bridge hotplug notification logic will not be received by the kernel, stalling all plug events on all slots associated with the PE. 2) When a device is removed from a slot, regardless of surprise or programmatic removal, the associated PHB/PE ls left frozen. If this freeze is not cleared via a fundamental reset, skiboot is unable to clear the freeze and cannot retrain / rescan the slot. This also requires a reboot to clear the freeze and redetect the device in the slot. Issue the appropriate unfreeze and rescan commands on hotplug events, and don't oops on hotplug if pci_bus_to_OF_node() returns NULL. [bhelgaas: tidy comments]

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.

In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)

In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked.

In the Linux kernel, the following vulnerability has been resolved: net: rose: include node references in rose_neigh refcount Current implementation maintains two separate reference counting mechanisms: the 'count' field in struct rose_neigh tracks references from rose_node structures, while the 'use' field (now refcount_t) tracks references from rose_sock. This patch merges these two reference counting systems using 'use' field for proper reference management. Specifically, this patch adds incrementing and decrementing of rose_neigh->use when rose_neigh->count is incremented or decremented. This patch also modifies rose_rt_free(), rose_rt_device_down() and rose_clear_route() to properly release references to rose_neigh objects before freeing a rose_node through rose_remove_node(). These changes ensure rose_neigh structures are properly freed only when all references, including those from rose_node structures, are released. As a result, this resolves a slab-use-after-free issue reported by Syzbot.

In the Linux kernel, the following vulnerability has been resolved: fs/smb: Fix inconsistent refcnt update A possible inconsistent update of refcount was identified in `smb2_compound_op`. Such inconsistent update could lead to possible resource leaks. Why it is a possible bug: 1. In the comment section of the function, it clearly states that the reference to `cfile` should be dropped after calling this function. 2. Every control flow path would check and drop the reference to `cfile`, except the patched one. 3. Existing callers would not handle refcount update of `cfile` if -ENOMEM is returned. To fix the bug, an extra goto label "out" is added, to make sure that the cleanup logic would always be respected. As the problem is caused by the allocation failure of `vars`, the cleanup logic between label "finished" and "out" can be safely ignored. According to the definition of function `is_replayable_error`, the error code of "-ENOMEM" is not recoverable. Therefore, the replay logic also gets ignored.

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid a NULL pointer dereference [WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Validate length in packet header before skb_put() When receiving a vsock packet in the guest, only the virtqueue buffer size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately, virtio_vsock_skb_rx_put() uses the length from the packet header as the length argument to skb_put(), potentially resulting in SKB overflow if the host has gone wonky. Validate the length as advertised by the packet header before calling virtio_vsock_skb_rx_put().

In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb() In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add check on msg[0].len to prevent crash. Similar issue occurs when access msg[1].buf[0] and msg[1].buf[1]. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: net/sched: Restrict conditions for adding duplicating netems to qdisc tree netem_enqueue's duplication prevention logic breaks when a netem resides in a qdisc tree with other netems - this can lead to a soft lockup and OOM loop in netem_dequeue, as seen in [1]. Ensure that a duplicating netem cannot exist in a tree with other netems. Previous approaches suggested in discussions in chronological order: 1) Track duplication status or ttl in the sk_buff struct. Considered too specific a use case to extend such a struct, though this would be a resilient fix and address other previous and potential future DOS bugs like the one described in loopy fun [2]. 2) Restrict netem_enqueue recursion depth like in act_mirred with a per cpu variable. However, netem_dequeue can call enqueue on its child, and the depth restriction could be bypassed if the child is a netem. 3) Use the same approach as in 2, but add metadata in netem_skb_cb to handle the netem_dequeue case and track a packet's involvement in duplication. This is an overly complex approach, and Jamal notes that the skb cb can be overwritten to circumvent this safeguard. 4) Prevent the addition of a netem to a qdisc tree if its ancestral path contains a netem. However, filters and actions can cause a packet to change paths when re-enqueued to the root from netem duplication, leading us to the current solution: prevent a duplicating netem from inhabiting the same tree as other netems. [1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/ [2] https://lwn.net/Articles/719297/

In the Linux kernel, the following vulnerability has been resolved: parisc: Revise gateway LWS calls to probe user read access We use load and stbys,e instructions to trigger memory reference interruptions without writing to memory. Because of the way read access support is implemented, read access interruptions are only triggered at privilege levels 2 and 3. The kernel and gateway page execute at privilege level 0, so this code never triggers a read access interruption. Thus, it is currently possible for user code to execute a LWS compare and swap operation at an address that is read protected at privilege level 3 (PRIV_USER). Fix this by probing read access rights at privilege level 3 and branching to lws_fault if access isn't allowed.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix a null pointer dereference in ice_copy_and_init_pkg() Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-charger: Fix null check for power_supply_get_by_name In the cpcap_usb_detect() function, the power_supply_get_by_name() function may return `NULL` instead of an error pointer. To prevent potential null pointer dereferences, Added a null check.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use aead_request_free to match aead_request_alloc Use aead_request_free() instead of kfree() to properly free memory allocated by aead_request_alloc(). This ensures sensitive crypto data is zeroed before being freed.

In the Linux kernel, the following vulnerability has been resolved: block: avoid possible overflow for chunk_sectors check in blk_stack_limits() In blk_stack_limits(), we check that the t->chunk_sectors value is a multiple of the t->physical_block_size value. However, by finding the chunk_sectors value in bytes, we may overflow the unsigned int which holds chunk_sectors, so change the check to be based on sectors.