A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function um_inspect_cross_band of the file /goform/RP_setBasicAuto. The manipulation of the argument staticGateway leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function ipv6cmd of the file /goform/setIpv6. The manipulation of the argument Ipv6PriDns/Ipv6SecDns/Ipv6StaticGateway/LanIpv6Addr/LanPrefixLen/pppoeUser/pppoePass/pppoeIdleTime/pppoeRedialPeriod/Ipv6in4_PrefixLen/LocalIpv6/RemoteIpv4/LanIPv6_Prefix/LanPrefixLen/ipv6to4Relay/ipv6rdRelay/tunrd_PrefixLen/wan_UseLinkLocal/Ipv6StaticIp/Ipv6PrefixLen leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A post-authentication command injection vulnerability in the "priv" parameter of Zyxel DX3300-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an authenticated attacker to execute operating system (OS) commands on an affected device.

An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.

A format string vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute arbitrary commands on a specific API endpoint.

Authenticated user can execute arbitrary commands in the context of the root user by providing payload in the "destination" field of the network test tools. This is similar to the vulnerability CVE-2021-28151 mitigated on the user interface level by blacklisting characters with JavaScript, however, it can still be exploited by sending POST requests directly.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters

A vulnerability classified as critical has been found in D-Link DIR-818LW up to 20191215. This affects an unknown part of the component System Time Page. The manipulation of the argument NTP Server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Xuxueli xxl-job up to 3.1.1 and classified as critical. Affected by this vulnerability is the function commandJobHandler of the file src\main\java\com\xxl\job\executor\service\jobhandler\SampleXxlJob.java. The manipulation leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). This vulnerability affects the function fromNetToolGet of the file /goform/setPingInfo of the component httpd. The manipulation of the argument domain leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in TOTOLINK N200RE 9.3.5u.6095_B20200916/9.3.5u.6139_B20201216. Affected by this issue is the function sub_41A0F8 of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

An OS command injection vulnerability has been found to affect legacy QNAP VioStor NVR models running QVR Firmware 4.x. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QVR Firmware 5.0.0 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.5.2645 build 20240116 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.5.2647 build 20240118 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 271524.

An OS command injection vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: QuMagie 2.2.1 and later

Certain MOXA devices allow Authenticated Command Injection via /forms/web_importTFTP. This affects WAC-2004 1.7, WAC-1001 2.1, WAC-1001-T 2.1, OnCell G3470A-LTE-EU 1.7, OnCell G3470A-LTE-EU-T 1.7, TAP-323-EU-CT-T 1.3, TAP-323-US-CT-T 1.3, TAP-323-JP-CT-T 1.3, WDR-3124A-EU 2.3, WDR-3124A-EU-T 2.3, WDR-3124A-US 2.3, and WDR-3124A-US-T 2.3.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. This affects the function mp of the file /goform/mp of the component webs. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

File-Manager in MGT CloudPanel 2.0.0 through 2.3.2 allows the lowest privilege user to achieve OS command injection by changing file ownership and changing file permissions to 4755.

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X6000R v9.4.0cu.1498_B20250826 contains an OS command injection vulnerability in the NTPSyncWithHost handler of the /usr/sbin/shttpd executable. The host_time parameter is retrieved via sub_40C404 and passed to a date -s shell command through CsteSystem. While the first two tokens of the input are validated, the remainder of the string is not sanitized, allowing authenticated attackers to execute arbitrary shell commands via shell metacharacters.

An issue in Datart v1.0.0-rc.3 allows attackers to execute arbitrary code via the url parameter in the JDBC configuration

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

RAGFlow is an open-source RAG (Retrieval-Augmented Generation) engine. In versions prior to 0.23.0, a low-privileged authenticated user (normal login account) can execute arbitrary system commands on the server host process via the frontend Canvas CodeExec component, completely bypassing sandbox isolation. This occurs because untrusted data (stdout) is parsed using eval() with no filtering or sandboxing. The intended design was to "automatically convert string results into Python objects," but this effectively executes attacker-controlled code. Additional endpoints lack access control or contain inverted permission logic, significantly expanding the attack surface and enabling chained exploitation. Version 0.23.0 contains a patch for the issue.

A vulnerability classified as critical has been found in D-Link DI-7300G+ 19.12.25A1. Affected is an unknown function of the file wget_test.asp. The manipulation of the argument url leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the File Storage Directory Mount Path functionality allows users with application/service management permissions to execute arbitrary commands as root on managed servers. The file_storage_directory_source parameter is passed directly to shell commands without proper sanitization, enabling full remote code execution on the host system. Version 4.0.0-beta.451 fixes the issue.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the Database Import functionality allows users with application/service management permissions to execute arbitrary commands as root on managed servers. Database names used in import operations are passed directly to shell commands without sanitization, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue.

Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

ILIAS before 7.16 allows OS Command Injection.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the Dynamic Proxy Configuration Filename handling allows users with application/service management permissions to execute arbitrary commands as root on managed servers. Proxy configuration filenames are passed to shell commands without proper escaping, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the Database Backup functionality allows users with application/service management permissions to execute arbitrary commands as root on managed servers. Database names used in backup operations are passed directly to shell commands without sanitization, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetmask0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.

A weakness has been identified in Tenda AC6 15.03.06.23. Affected by this vulnerability is the function formWifiApScan of the file /goform/WifiApScan of the component httpd. Executing a manipulation of the argument wl2g.public.country/wl5g.public.country can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an authenticated user.

A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

Arbitrary command execution can occur in Webmin through 1.962. Any user authorized for the Package Updates module can execute arbitrary commands with root privileges via vectors involving %0A and %0C. NOTE: this issue exists because of an incomplete fix for CVE-2019-12840.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the diagnostic tools page. This vulnerability is exploited via a crafted HTTP request.

An arbitrary OS command may be executed on the product by the user who can log in to the web management interface.