quiche v. 0.15.0 through 0.19.0 was discovered to be vulnerable to unbounded queuing of path validation messages, which could lead to excessive resource consumption. QUIC path validation (RFC 9000 Section 8.2) requires that the recipient of a PATH_CHALLENGE frame responds by sending a PATH_RESPONSE. An unauthenticated remote attacker can exploit the vulnerability by sending PATH_CHALLENGE frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that PATH_RESPONSE frames can only be sent at the slower rate than they are received; leading to storage of path validation data in an unbounded queue. Quiche versions greater than 0.19.0 address this problem.

In PHP versions 7.2.x below 7.2.31, 7.3.x below 7.3.18 and 7.4.x below 7.4.6, when HTTP file uploads are allowed, supplying overly long filenames or field names could lead PHP engine to try to allocate oversized memory storage, hit the memory limit and stop processing the request, without cleaning up temporary files created by upload request. This potentially could lead to accumulation of uncleaned temporary files exhausting the disk space on the target server.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-942-APPLICATION-ATTACK-SQLI.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with nested repetition operators.

Mattermost fails to properly sanitize the request to /api/v4/redirect_location allowing an attacker, sending a specially crafted request to /api/v4/redirect_location, to fill up the memory due to caching large items.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with $a# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with next# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with set_error_handler# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

A security flaw has been discovered in Open5GS up to 2.7.5. This issue affects some unknown processing of the component Timer Handler. The manipulation results in resource consumption. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The patch is identified as c7c131f8d2cb1195ada5e0e691b6868ebcd8a845. It is best practice to apply a patch to resolve this issue.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

In mlflow/mlflow version v2.13.2, a vulnerability exists that allows the creation or renaming of an experiment with a large number of integers in its name due to the lack of a limit on the experiment name. This can cause the MLflow UI panel to become unresponsive, leading to a potential denial of service. Additionally, there is no character limit in the `artifact_location` parameter while creating the experiment.

In Apache HTTP server versions 2.4.37 and prior, by sending request bodies in a slow loris way to plain resources, the h2 stream for that request unnecessarily occupied a server thread cleaning up that incoming data. This affects only HTTP/2 (mod_http2) connections.

A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.50), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.50), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.50), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.50), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.50), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.50), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.50), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.50), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.50), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.50), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.50), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.50), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.50), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.50), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.50), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.50), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.50), SIPROTEC 5 7SX85 (CP300) (All versions < V9.50), SIPROTEC 5 7UM85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.50), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.50), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.50), SIPROTEC 5 7VE85 (CP300) (All versions < V9.50), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.50), SIPROTEC 5 7VU85 (CP300) (All versions < V9.50), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.50), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.50). Affected devices do not properly restrict secure client-initiated renegotiations within the SSL and TLS protocols. This could allow an attacker to create a denial of service condition on the ports 443/tcp and 4443/tcp for the duration of the attack.

A vulnerability, which was classified as problematic, was found in JoeyBling bootplus up to 247d5f6c209be1a5cf10cd0fa18e1d8cc63cf55d. Affected is the function qrCode of the file src/main/java/io/github/controller/QrCodeController.java. The manipulation of the argument w/h leads to resource consumption. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available.

Synapse before 1.52.0 with URL preview functionality enabled will attempt to generate URL previews for media stream URLs without properly limiting connection time. Connections will only be terminated after `max_spider_size` (default: 10M) bytes have been downloaded, which can in some cases lead to long-lived connections towards the streaming media server (for instance, Icecast). This can cause excessive traffic and connections toward such servers if their stream URL is, for example, posted to a large room with many Synapse instances with URL preview enabled. Version 1.52.0 implements a timeout mechanism which will terminate URL preview connections after 30 seconds. Since generating URL previews for media streams is not supported and always fails, 1.53.0 additionally implements an allow list for content types for which Synapse will even attempt to generate a URL preview. Upgrade to 1.53.0 to fully resolve the issue. As a workaround, turn off URL preview functionality by setting `url_preview_enabled: false` in the Synapse configuration file.

Bref is an open-source project that helps users go serverless on Amazon Web Services with PHP. When Bref prior to version 2.1.17 is used with the Event-Driven Function runtime and the handler is a `RequestHandlerInterface`, then the Lambda event is converted to a PSR7 object. During the conversion process, if the request is a MultiPart, each part is parsed. In the parsing process, the `Content-Type` header of each part is read using the `Riverline/multipart-parser` library. The library, in the `StreamedPart::parseHeaderContent` function, performs slow multi-byte string operations on the header value. Precisely, the `mb_convert_encoding` function is used with the first (`$string`) and third (`$from_encoding`) parameters read from the header value. An attacker could send specifically crafted requests which would force the server into performing long operations with a consequent long billed duration. The attack has the following requirements and limitations: The Lambda should use the Event-Driven Function runtime and the `RequestHandlerInterface` handler and should implement at least an endpoint accepting POST requests; the attacker can send requests up to 6MB long (this is enough to cause a billed duration between 400ms and 500ms with the default 1024MB RAM Lambda image of Bref); and if the Lambda uses a PHP runtime <= php-82, the impact is higher as the billed duration in the default 1024MB RAM Lambda image of Bref could be brought to more than 900ms for each request. Notice that the vulnerability applies only to headers read from the request body as the request header has a limitation which allows a total maximum size of ~10KB. Version 2.1.17 contains a fix for this issue.

joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. In versions 1.3.4 through 1.6.5, joserfc accepts oversized RFC7797 b64=false JWS payloads without applying JWSRegistry.max_payload_length, which can lead to resource exhaustion. The normal JWS compact and flattened JSON paths reject payloads above the configured payload-size limit with ExceededSizeError. The RFC7797 unencoded payload paths do not make the same check. A valid b64=false compact or flattened JSON JWS can therefore deserialize successfully with a payload larger than JWSRegistry.max_payload_length. Applications that accept lower-trust JWS values and rely on joserfc to reject oversized token content during verification have a moderate availability risk. This issue has been fixed in version 1.6.7.

A vulnerability was found in Braces versions 2.2.0 and above, prior to 2.3.1. Affected versions of this package are vulnerable to Regular Expression Denial of Service (ReDoS) attacks.

It was discovered that the is-my-json-valid JavaScript library used an inefficient regular expression to validate JSON fields defined to have email format. A specially crafted JSON file could cause it to consume an excessive amount of CPU time when validated.

Cosign is a sigstore signing tool for OCI containers. Cosign is susceptible to a denial of service by an attacker controlled registry. An attacker who controls a remote registry can return a high number of attestations and/or signatures to Cosign and cause Cosign to enter a long loop resulting in an endless data attack. The root cause is that Cosign loops through all attestations fetched from the remote registry in pkg/cosign.FetchAttestations. The attacker needs to compromise the registry or make a request to a registry they control. When doing so, the attacker must return a high number of attestations in the response to Cosign. The result will be that the attacker can cause Cosign to go into a long or infinite loop that will prevent other users from verifying their data. In Kyvernos case, an attacker whose privileges are limited to making requests to the cluster can make a request with an image reference to their own registry, trigger the infinite loop and deny other users from completing their admission requests. Alternatively, the attacker can obtain control of the registry used by an organization and return a high number of attestations instead the expected number of attestations. The issue can be mitigated rather simply by setting a limit to the limit of attestations that Cosign will loop through. The limit does not need to be high to be within the vast majority of use cases and still prevent the endless data attack. This issue has been patched in version 2.2.1 and users are advised to upgrade.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i800NC, RUGGEDCOM i801, RUGGEDCOM i801NC, RUGGEDCOM i802, RUGGEDCOM i802NC, RUGGEDCOM i803, RUGGEDCOM i803NC, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2100NC, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M2200NC, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM M969NC, RUGGEDCOM RMC30, RUGGEDCOM RMC30NC, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RMC8388NC V4.X, RUGGEDCOM RMC8388NC V5.X, RUGGEDCOM RP110, RUGGEDCOM RP110NC, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600FNC, RUGGEDCOM RS1600NC, RUGGEDCOM RS1600T, RUGGEDCOM RS1600TNC, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS400NC, RUGGEDCOM RS401, RUGGEDCOM RS401NC, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416NC, RUGGEDCOM RS416NCv2 V4.X, RUGGEDCOM RS416NCv2 V5.X, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416PNC, RUGGEDCOM RS416PNCv2 V4.X, RUGGEDCOM RS416PNCv2 V5.X, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000ANC, RUGGEDCOM RS8000H, RUGGEDCOM RS8000HNC, RUGGEDCOM RS8000NC, RUGGEDCOM RS8000T, RUGGEDCOM RS8000TNC, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GNC, RUGGEDCOM RS900GNC(32M) V4.X, RUGGEDCOM RS900GNC(32M) V5.X, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900GPNC, RUGGEDCOM RS900L, RUGGEDCOM RS900LNC, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900MNC-GETS-C01, RUGGEDCOM RS900MNC-GETS-XX, RUGGEDCOM RS900MNC-STND-XX, RUGGEDCOM RS900MNC-STND-XX-C01, RUGGEDCOM RS900NC, RUGGEDCOM RS900NC(32M) V4.X, RUGGEDCOM RS900NC(32M) V5.X, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910LNC, RUGGEDCOM RS910NC, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920LNC, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930LNC, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS940GNC, RUGGEDCOM RS969, RUGGEDCOM RS969NC, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100NC, RUGGEDCOM RSG2100NC(32M) V4.X, RUGGEDCOM RSG2100NC(32M) V5.X, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2100PNC, RUGGEDCOM RSG2100PNC (32M) V4.X, RUGGEDCOM RSG2100PNC (32M) V5.X, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2200NC, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2288NC V4.X, RUGGEDCOM RSG2288NC V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300NC V4.X, RUGGEDCOM RSG2300NC V5.X, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2300PNC V4.X, RUGGEDCOM RSG2300PNC V5.X, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG2488NC V4.X, RUGGEDCOM RSG2488NC V5.X, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSG920PNC V4.X, RUGGEDCOM RSG920PNC V5.X, RUGGEDCOM RSL910, RUGGEDCOM RSL910NC, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. Affected devices improperly handle partial HTTP requests which makes them vulnerable to slowloris attacks. This could allow a remote attacker to create a denial of service condition that persists until the attack ends.

An uncontrolled resource consumption issue when parsing URLs in GitLab CE/EE affecting all versions prior to 15.3.5, 15.4 prior to 15.4.4, and 15.5 prior to 15.5.2 allows an attacker to cause performance issues and potentially a denial of service on the GitLab instance.

markdown-it is a Markdown parser. Versions 14.1.1 and below contain a denial-of-service vulnerability when typographer: true is enabled, due to quadratic (O(n^2)) processing in the smartquotes rule. The issue stems from repeatedly modifying strings with replaceAt(), which performs O(n) slicing and concatenation per quote character. This can cause excessive CPU consumption when parsing quote-heavy, user-supplied markdown and may let attackers degrade or disrupt service availability. Although typographer is disabled by default, many production apps enable it for smart typography, making the issue relevant. This issue has been fixed in version 14.2.0.

UAParser.js is a JavaScript library to detect browsers, operating systems, CPUs, and devices from user-agent data. From 2.0.1 until 2.0.10, a regular expression denial-of-service vulnerability exists when using the Client Hints API. By sending a crafted Sec-CH-UA-Model header to an application that calls UAParser(headers).withClientHints(), an attacker can cause excessive CPU time due to catastrophic backtracking in the device regex because Client Hints values are copied without the UA_MAX_LENGTH limit used for User-Agent values. This issue is fixed in version 2.0.10.

OpenZeppelin Contracts is a library for secure smart contract development. The target contract of an EIP-165 `supportsInterface` query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost. The issue has been fixed in v4.7.2. Users are advised to upgrade. There are no known workarounds for this issue.

JOSE is "JSON Web Almost Everything" - JWA, JWS, JWE, JWT, JWK, JWKS with no dependencies using runtime's native crypto in Node.js, Browser, Cloudflare Workers, Electron, and Deno. The PBKDF2-based JWE key management algorithms expect a JOSE Header Parameter named `p2c` PBES2 Count, which determines how many PBKDF2 iterations must be executed in order to derive a CEK wrapping key. The purpose of this parameter is to intentionally slow down the key derivation function in order to make password brute-force and dictionary attacks more expensive. This makes the PBES2 algorithms unsuitable for situations where the JWE is coming from an untrusted source: an adversary can intentionally pick an extremely high PBES2 Count value, that will initiate a CPU-bound computation that may take an unreasonable amount of time to finish. Under certain conditions, it is possible to have the user's environment consume unreasonable amount of CPU time. The impact is limited only to users utilizing the JWE decryption APIs with symmetric secrets to decrypt JWEs from untrusted parties who do not limit the accepted JWE Key Management Algorithms (`alg` Header Parameter) using the `keyManagementAlgorithms` (or `algorithms` in v1.x) decryption option or through other means. The `v1.28.2`, `v2.0.6`, `v3.20.4`, and `v4.9.2` releases limit the maximum PBKDF2 iteration count to `10000` by default. It is possible to adjust this limit with a newly introduced `maxPBES2Count` decryption option. If users are unable to upgrade their required library version, they have two options depending on whether they expect to receive JWEs using any of the three PBKDF2-based JWE key management algorithms. They can use the `keyManagementAlgorithms` decryption option to disable accepting PBKDF2 altogether, or they can inspect the JOSE Header prior to using the decryption API and limit the PBKDF2 iteration count (`p2c` Header Parameter).

PyJWT is a JSON Web Token implementation in Python. From 2.8.0 to 2.12.1, when verifying detached JWS tokens using the unencoded-payload option ("b64": false, RFC 7797), PyJWT performs Base64URL decoding of the compact-serialization payload segment before enforcing the detached-payload rules. For b64=false, PyJWT later discards that decoded payload and replaces it with the caller-provided detached_payload. In practice, this turns the middle segment into an attacker-controlled “work amplifier”: a remote client can supply an arbitrarily large Base64URL payload segment that forces CPU work + memory allocations even if the signature is invalid. This creates an unauthenticated DoS vector against any endpoint that verifies detached JWS using PyJWT. This vulnerability is fixed in 2.13.0.

Strawberry GraphQL is a library for creating GraphQL APIs. In versions 0.172.0 through0.315.6, the MaxAliasesLimiter extension in Strawberry fails to account for the multiplicative/amplification effect of FragmentSpreadNode. While it correctly counts static aliases within the AST it does not consider how many times a fragments internal aliases are expanded during execution. this allows an attacker to bypass alias limits and force the server to resolve and render a significantly higher number of aliases than allowed, potentially leading to a dos via resource exhaustion. Version 0.315.7 contains a fix for the issue.

Netty is a network application framework for development of protocol servers and clients. In netty-codec-http2 prior to versions 4.1.135.Final and 4.2.15.Final, the `DelegatingDecompressorFrameListener` class orchestrates HTTP/2 decompression by embedding a per-stream `EmbeddedChannel` that runs the appropriate decompression codec (gzip, deflate, zstd) and forwards decompressed chunks to a wrapped listener. Each decompressed chunk is a pooled `ByteBuf` handed to an anonymous `ChannelInboundHandlerAdapter` tail handler, which becomes the sole owner responsible for releasing it. A remote peer could send frames that would result in the flow-controller throwing and so trigger a resource leak which at the end might take down the whole JVM due OOME. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.

The vCenter Server contains a denial-of-service vulnerability in the content library service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to trigger a denial-of-service condition by sending a specially crafted header.

In CODESYS Gateway Server V2 an insufficient check for the activity of TCP client connections allows an unauthenticated attacker to consume all available TCP connections and prevent legitimate users or clients from establishing a new connection to the CODESYS Gateway Server V2. Existing connections are not affected and therefore remain intact.

Strawberry GraphQL is a library for creating GraphQL APIs. In versions 0.71.0 through 0.315.6, the QueryDepthLimiter extension is vulnerable to an Application-level DOS due to a lack of cycle detection in fragment spreads. When a query contains circular fragment references the determine_depth function enters an infinite recursion, leading to a RecursionError and crashing the validation process. Version 0.315.7 patches the issue.

Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, DefaultHttp2Connection.DefaultEndpoint initialises maxActiveStreams/maxStreams to Integer.MAX_VALUE, and Http2Settings never inserts SETTINGS_MAX_CONCURRENT_STREAMS by default (Http2Settings.java:305-307 only clamps a user-supplied value). Unless the application explicitly calls initialSettings().maxConcurrentStreams(n), a Netty HTTP/2 server advertises no limit and enforces none locally. Each open stream allocates a DefaultStream object, PropertyMap slots, flow-controller state and IntObjectHashMap entry; with ~2^30 permissible odd stream IDs a single TCP connection can create hundreds of thousands of long-lived stream objects. This is also the precondition for CVE-2023-44487-style Rapid-Reset amplification, where the absence of a low concurrent cap multiplies backend work. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 3). The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.

fugit contains time tools for flor and the floraison group. The fugit "natural" parser, that turns "every wednesday at 5pm" into "0 17 * * 3", accepted any length of input and went on attempting to parse it, not returning promptly, as expected. The parse call could hold the thread with no end in sight. Fugit dependents that do not check (user) input length for plausibility are impacted. A fix was released in fugit 1.11.1.

A vulnerability has been identified in SIMATIC ET 200pro IM154-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8F PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8FX PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.1), SIMATIC S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317TF-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319F-3 PN/DP (All versions < V3.X.17), SIMATIC S7-400 PN/DP V6 and below CPU family (incl. SIPLUS variants) (All versions), SIMATIC S7-400 PN/DP V7 CPU family (incl. SIPLUS variants) (All versions), SIMATIC WinAC RTX 2010 (All versions), SIMATIC WinAC RTX F 2010 (All versions), SIPLUS ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIPLUS ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIPLUS S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17). Affected devices contain a vulnerability that could cause a denial of service condition of the web server by sending specially crafted HTTP requests to ports 80/tcp and 443/tcp. Beyond the web service, no other functions or interfaces are affected by the denial of service condition.

REXML is an XML toolkit for Ruby. The REXML gem 3.3.2 has a DoS vulnerability when it parses an XML that has many entity expansions with SAX2 or pull parser API. The REXML gem 3.3.3 or later include the patch to fix the vulnerability.

Multiple unauthenticated Denial-of-Service (DoS) vulnerabilities exist in the AP Certificate Management daemon accessed via the PAPI protocol. Successful exploitation of these vulnerabilities results in the ability to interrupt the normal operation of the affected Access Point.

Multiple unauthenticated Denial-of-Service (DoS) vulnerabilities exist in the Soft AP daemon accessed via the PAPI protocol. Successful exploitation of these vulnerabilities results in the ability to interrupt the normal operation of the affected Access Point.

Multiple unauthenticated Denial-of-Service (DoS) vulnerabilities exist in the Soft AP daemon accessed via the PAPI protocol. Successful exploitation of these vulnerabilities results in the ability to interrupt the normal operation of the affected Access Point.

REXML is an XML toolkit for Ruby. The REXML gem before 3.3.2 has some DoS vulnerabilities when it parses an XML that has many specific characters such as whitespace character, `>]` and `]>`. The REXML gem 3.3.3 or later include the patches to fix these vulnerabilities.

Spring MVC controller methods with an @RequestBody byte[] method parameter are vulnerable to a DoS attack.

SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.

Applications that parse ETags from "If-Match" or "If-None-Match" request headers are vulnerable to DoS attack. Users of affected versions should upgrade to the corresponding fixed version. Users of older, unsupported versions could enforce a size limit on "If-Match" and "If-None-Match" headers, e.g. through a Filter.

Vulnerability in Oracle REST Data Services (component: Core). Supported versions that are affected are 24.2.0-26.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle REST Data Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle REST Data Services. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, because of a missing check in the MNG coder it would be possible to read more images than the list limit policy would allow resulting in excessive resource use. This issue has been patched in versions 6.9.13-47 and 7.1.2-22.