Multiple authenticated remote code execution vulnerabilities were discovered in the AOS-CX command line interface in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.06.xxxx: 10.06.0170 and below, AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below. Aruba has released upgrades for Aruba AOS-CX devices that address these security vulnerabilities.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, an administrator with the permissions to upload files via DataFlow and to create products was able to execute arbitrary code via the convert profile. Versions 19.4.22 and 20.0.19 contain a patch for this issue.

A vulnerability was found in Ruijie RG-UAC up to 20240428. It has been classified as critical. Affected is an unknown function of the file /view/IPV6/ipv6StaticRoute/static_route_edit_ipv6.php. The manipulation of the argument oldipmask/oldgateway/olddevname leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263112. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable command injection vulnerability exists in the cloud connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject operating system commands into the TimeoutPrepared parameter value contained in the firmware update command.

A vulnerability was found in Ruijie RG-UAC up to 20240428 and classified as critical. This issue affects some unknown processing of the file /view/IPV6/ipv6StaticRoute/static_route_add_ipv6.php. The manipulation of the argument text_prefixlen/text_gateway/devname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263111. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

RELY-PCIe v22.2.1 to v23.1.0 was discovered to contain a command injection vulnerability via the time_date function.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.3 and was fixed in versions 3.0.21, 3.1.13, 3.2.5. This vulnerability was reported via the GitHub Bug Bounty program.

An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.

A command injection vulnerability is present in the web management interface of ArubaOS that permits an authenticated user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. This vulnerability only affects ArubaOS 8.x.

An issue in Netgate pfSense v.2.7.0 allows a remote attacker to execute arbitrary code via a crafted request to the interfaces_gif_edit.php and interfaces_gre_edit.php components.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

An exploitable command injection vulnerability exists in the iw_webs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12)

ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via keys smartqos_express_devices and smartqos_normal_devices in SetSmartQoSSettings.

There are command injection vulnerabilities present in the AirWave application. Certain input fields controlled by an administrative user are not properly sanitized before being parsed by AirWave. If conditions are met, an attacker can obtain command execution on the host.

A vulnerability was found in Ruijie RG-UAC up to 20240428. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /view/IPV6/naborTable/add_commit.php. The manipulation of the argument ip_addr/mac_addr leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263113 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

RELY-PCIe v22.2.1 to v23.1.0 was discovered to contain a command injection vulnerability via the sys_mgmt function.

Vulnerability in admin_ip.php in Seacms v13.1, when action=set, allows attackers to control IP parameters that are written to the data/admin/ip.php file and could result in arbitrary command execution.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

RELY-PCIe v22.2.1 to v23.1.0 was discovered to contain a command injection vulnerability via the sys_conf function.

A vulnerability has been found in Ruijie RG-UAC up to 20240428 and classified as critical. This vulnerability affects unknown code of the file /view/IPV6/ipv6Addr/ip_addr_edit_commit.php. The manipulation of the argument text_ip_addr/orgprelen/orgname leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263110 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240428. Affected is an unknown function of the file /view/dhcp/dhcpClient/dhcp_client_commit.php. The manipulation of the argument ifName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-263106 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.

An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command.

A Command Injection vulnerability exists in Vivotek PT7135 IP Cameras 0300a and 0400a via the system.ntp parameter to the farseer.out binary file, which cold let a malicious user execute arbitrary code.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

The email search interface of HGiga iSherlock (including MailSherlock, SpamSherock, AuditSherlock) fails to filter special characters in certain function parameters, allowing remote attackers with administrative privileges to exploit this vulnerability for Command Injection attacks, enabling execution of arbitrary system commands.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [4] the dns_data->dns1 variable, that has the value of the dns1 parameter provided through the SetLocal API, is not validated properly. This would lead to an OS command injection.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setL2tpServerCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701. Likelihood: High. However, the attacker will need a (low privilege) account to gain access to the action.exe CGI binary and upload the crafted firmware file, or convince a user with such access to upload it. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).

On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects GS108Tv2 before 5.4.2.36, GS110TPP before 7.0.7.2, GS110TPv2 before 5.4.2.36., GS110TPv3 before 7.0.7.2, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

Certain TP-Link devices allow Command Injection. This affects NC260 1.5.2 build 200304 and NC450 1.5.3 build 200304.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701. Likelihood: Moderate – It might be difficult for an attacker to identify the file structure of the <redated> directory, and then modify the backup to add a new CGI script in the correct directory. Furthermore, the attacker will need an account to restore the settings backup, or convince a user with such access to upload a modified backup file. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).

Authenticated command injection in the filename of a <redacted>.exe request leads to remote code execution as the root user. This issue affects Iocharger firmware for AC models before version 24120701. Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services. CVSS clarification: This attack can be performed over any network conenction serving the web interfacr (AV:N), and there are not additional mitigating measures that need to be circumvented (AC:L) or other prerequisites (AT:N). The attack does require privileges, but the level does not matter (PR:L), there is no user interaction required (UI:N). The attack leeds to a full compromised of the charger (VC:H/VI:H/VA:H) and a compromised charger can be used to "pivot" to networks that should normally not be reachable (SC:L/SI:L/SA:H). Because this is an EV chargers with significant pwoer, there is a potential safety imp0act (S:P). THis attack can be automated (AU:Y).

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.