Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite. Affected Products: UniFi Connect EV Station Lite (Version 1.5.1 and earlier) Mitigation: Update UniFi Connect EV Station Lite to Version 1.5.2 or later

NETSCOUT nGeniusPULSE 3.8 has a Command Injection Vulnerability.

Tenda ac9 v1.0 firmware v15.03.05.19 is vulnerable to command injection in /goform/SetSambaCfg, which may lead to remote arbitrary code execution.

An issue was discovered in Donfig 0.3.0. There is a vulnerability in the collect_yaml method in config_obj.py. It can execute arbitrary Python commands, resulting in command execution.

A command injection vulnerability in the web interface of Adtran 411 ONT L80.00.0011.M2 allows attackers to escalate privileges to root and execute arbitrary commands.

TOTOLINK X5000R B20210419 was discovered to contain a remote code execution (RCE) vulnerability via the setTracerouteCfg interface.

A command injection vulnerability in the component diag_backup.php of OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 allows attackers to execute arbitrary commands via a crafted backup configuration file.

D-Link DIR-816 A2 1.10 B05 was discovered to contain a command injection vulnerability via the component /goform/Diagnosis.

A command injection vulnerability in the component /api/cron/settings/setJob/ of OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 allows attackers to execute arbitrary system commands.

RE11S v1.11 was discovered to contain a command injection vulnerability via the component /goform/formAccept.

The Platform component of Mitel OpenScape 4000 and OpenScape 4000 Manager V11 R0.22.0 through V11 R0.22.1, V10 R1.54.0 through V10 R1.54.1, and V10 R1.42.6 and earlier could allow an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization. A successful exploit could allow an attacker to execute arbitrary commands within the same privilege level as the web access process.

A vulnerability has been identified in Spectrum Power 4 (with Web Office Portal). An attacker with network access to the web server on port 80/TCP or 443/TCP could execute system commands with administrative privileges. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected service. No user interaction is required to exploit this security vulnerability. Successful exploitation of the security vulnerability compromises confidentiality, integrity or availability of the targeted system. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the protal_delete_picname parameter in the sub_41171C function at bin/webmgnt.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the destination parameter of sub_431F64 function in bin/webmgnt.

Edgecore ECS2020 Firmware 1.0.0.0 devices allow Unauthenticated Command Injection via the command1 HTTP header to the /EXCU_SHELL URI.

An issue in COMFAST CF-XR11 v.2.7.2 allows an attacker to execute arbitrary code via the ifname and mac parameters in the sub_410074 function at bin/webmgnt.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability detected at function sub_4143F0. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter timestr.

D-LINK DIR-859 A1 1.05 and A1 1.06B01 Beta01 was discovered to contain a command injection vulnerability via the lxmldbc_system function at /htdocs/cgibin.

A remote code execution vulnerability in development mode Rails <5.2.2.1, <6.0.0.beta3 can allow an attacker to guess the automatically generated development mode secret token. This secret token can be used in combination with other Rails internals to escalate to a remote code execution exploit.

An issue in Wavlink WL_WNJ575A3 v.R75A3_V1410_220513 allows a remote attacker to execute arbitrary code via username parameter of the set_sys_adm function in adm.cgi.

netkit-rcp in rsh-client 0.17-24 allows command injection via filenames because /bin/sh is used by susystem, a related issue to CVE-2006-0225, CVE-2019-7283, and CVE-2020-15778.

SpotCam Co., Ltd. SpotCam Sense’s hidden Telnet function has a vulnerability of OS command injection. An remote unauthenticated attacker can exploit this vulnerability to execute command injection attack to perform arbitrary system commands or disrupt service.

A remote command execution (RCE) vulnerability in NextGen Mirth Connect v4.3.0 allows attackers to execute arbitrary commands on the hosting server.

A vulnerability was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. It has been rated as critical. Affected by this issue is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliKey/key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Command injection vulnerability in ELECOM and LOGITEC wireless LAN routers allows a remote unauthenticated attacker to execute an arbitrary command by sending a specially crafted request to a certain port of the web management page. Affected products and versions are as follows: WRC-1167GHBK3-A v1.24 and earlier, WRC-F1167ACF2 all versions, WRC-600GHBK-A all versions, WRC-733FEBK2-A all versions, WRC-1467GHBK-A all versions, WRC-1900GHBK-A all versions, and LAN-W301NR all versions.

Improper Input Validation vulnerability in Honeywell PM43 on 32 bit, ARM (Printer web page modules) allows Command Injection.This issue affects PM43 versions prior to P10.19.050004. Update to the latest available firmware version of the respective printers to version MR19.5 (e.g. P10.19.050006).

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection vulnerability via the FileName parameter in the setUploadSetting function.

A vulnerability classified as critical was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This vulnerability affects the function setRebootScheCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument mode/week/minute/recHour leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

TOTOLINK CP300+ V5.2cu.7594_B20200910 and before is vulnerable to command injection.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection vulnerability via the hostname parameter in the setOpModeCfg function.

A vulnerability has been found in ESAFENET DSM 3.1.2 and classified as critical. Affected by this vulnerability is the function examExportPDF of the file /admin/plan/examExportPDF. The manipulation of the argument s leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Synway SMG Gateway Management Software up to 20250204. It has been rated as critical. This issue affects some unknown processing of the file 9-12ping.php. The manipulation of the argument retry leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute arbitrary commands via a crafted POST request.

A vulnerability, that could result in Remote Code Execution (RCE), has been found in PlotAI. Lack of validation of LLM-generated output allows attacker to execute arbitrary Python code. Vendor commented out vulnerable line, further usage of the software requires uncommenting it and thus accepting the risk. The vendor does not plan to release a patch to fix this vulnerability.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the staticGw parameter at /setting/setWanIeCfg.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a command insertion vulnerability in setDiagnosisCfg.This vulnerability allows an attacker to execute arbitrary commands through the "ip" parameter.

The `Release PR Merged` workflow in the github repo taosdata/grafanaplugin is subject to a command injection vulnerability which allows for arbitrary code execution within the github action context due to the insecure usage of `${{ github.event.pull_request.title }}` in a bash command within the GitHub workflow. Attackers can inject malicious commands which will be executed by the workflow. This happens because `${{ github.event.pull_request.title }}` is directly passed to bash command on like 25 of the workflow. This may allow an attacker to gain access to secrets which the github action has access to or to otherwise make use of the compute resources.

A vulnerability was found in NUUO Camera up to 20250203. It has been declared as critical. This vulnerability affects the function print_file of the file /handle_config.php. The manipulation of the argument log leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setOpModeCfg. This vulnerability allows an attacker to execute arbitrary commands through the "hostName" parameter.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Raisecom Multi-Service Intelligent Gateway up to 20250208. It has been declared as critical. This vulnerability affects unknown code of the file /vpn/vpn_template_style.php of the component Request Parameter Handler. The manipulation of the argument stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the mp function in /bin/webs without any limitations.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain a command injection via the setWanCfg function.

A command injection vulnerability in the hostTime parameter in the function NTPSyncWithHostof TOTOLINK CP300+ V5.2cu.7594_B20200910 allows attackers to execute arbitrary commands via a crafted http packet.

TOTOLINK A3300R v17.0.0cu.557 is vulnerable to Command Injection via /cgi-bin/cstecgi.cgi.

In Cassia Gateway firmware XC1000_2.1.1.2303082218 and XC2000_2.1.1.2303090947, the queueUrl parameter in /bypass/config is not sanitized. This leads to injecting Bash code and executing it with root privileges on device startup.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the formAccept function in /bin/webs without any limitations.

There is a command injection vulnerability in the adslr VW2100 router with firmware version M1DV1.0. An unauthenticated attacker can exploit the vulnerability to execute system commands as the root user.