In MPLS environments, receipt of a specific SNMP packet may cause the routing protocol daemon (RPD) process to crash and restart. By continuously sending a specially crafted SNMP packet, an attacker can repetitively crash the RPD process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS : 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D48 on EX/QFX series; 15.1 versions prior to 15.1R4-S9, 15.1R7-S2; 15.1F6 versions prior to 15.1F6-S11; 15.1X49 versions prior to 15.1X49-D141, 15.1X49-D144, 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400 Series; 15.1X54 on ACX Series; 16.1 versions prior to 16.1R3-S10, 16.1R4-S11, 16.1R6-S5, 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S6; 17.1 versions prior to 17.1R2-S8, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R1-S1, 18.1R2-S1, 18.1R3; 18.2X75 versions prior to 18.2X75-D10.

The srxpfe process may crash on SRX Series services gateways when the UTM module processes a specific fragmented HTTP packet. The packet is misinterpreted as a regular TCP packet which causes the processor to crash. This issue affects all SRX Series platforms that support URL-Filtering and have web-filtering enabled. Affected releases are Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D85 on SRX Series; 15.1X49 versions prior to 15.1X49-D181, 15.1X49-D190 on SRX Series; 17.3 versions on SRX Series; 17.4 versions prior to 17.4R1-S8, 17.4R2-S5, 17.4R3 on SRX Series; 18.1 versions prior to 18.1R3-S6 on SRX Series; 18.2 versions prior to 18.2R2-S1, 18.2R3 on SRX Series; 18.3 versions prior to 18.3R1-S2, 18.3R2 on SRX Series; 18.4 versions prior to 18.4R1-S1, 18.4R2 on SRX Series.

When BGP tracing is enabled an incoming BGP message may cause the Junos OS routing protocol daemon (rpd) process to crash and restart. While rpd restarts after a crash, repeated crashes can result in an extended DoS condition. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9, 16.2R3; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3-S1; 17.3 versions prior to 17.3R3-S3, 17.3R3-S4, 17.3R4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3, 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4, 18.1R4; 18.2 versions prior to 18.2R2-S2, 18.2R2-S3, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2. This issue does not affect Junos releases prior to 16.1R1.

Receipt of a specific packet on the out-of-band management interface fxp0 may cause the system to crash and restart (vmcore). By continuously sending a specially crafted packet to the fxp0 interface, an attacker can repetitively crash the rpd process causing prolonged Denial of Service (DoS). Affected releases are Juniper Networks SRX5000 Series: 12.1X46 versions prior to 12.1X46-D82; 12.3X48 versions prior to 12.3X48-D80; 15.1X49 versions prior to 15.1X49-D160.

On Junos devices with the BGP graceful restart helper mode enabled or the BGP graceful restart mechanism enabled, a BGP session restart on a remote peer that has the graceful restart mechanism enabled may cause the local routing protocol daemon (RPD) process to crash and restart. By simulating a specific BGP session restart, an attacker can repeatedly crash the RPD process causing prolonged denial of service (DoS). Graceful restart helper mode for BGP is enabled by default. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S8; 17.1 versions prior to 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R2. Junos OS releases prior to 16.1R1 are not affected.

In Apache Subversion versions up to and including 1.9.10, 1.10.4, 1.12.0, Subversion's svnserve server process may exit when a client sends certain sequences of protocol commands. This can lead to disruption for users of the server.

PingCAP TiDB v6.1.0 was discovered to contain a NULL pointer dereference.

A vulnerability has been found in INSTAR 2K+ and 4K 3.11.1 Build 1124. This vulnerability affects unknown code of the component Backend IPC Server. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function read_50_controller_cap_complete of the file tools/mgmt-tester.c of the component BlueZ. The manipulation of the argument cap_len leads to null pointer dereference. It is recommended to apply a patch to fix this issue. VDB-211086 is the identifier assigned to this vulnerability.

On Junos devices with the BGP graceful restart helper mode enabled or the BGP graceful restart mechanism enabled, a certain sequence of BGP session restart on a remote peer that has the graceful restart mechanism enabled may cause the local routing protocol daemon (RPD) process to crash and restart. Repeated crashes of the RPD process can cause prolonged Denial of Service (DoS). Graceful restart helper mode for BGP is enabled by default. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S3; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.2X75 versions prior to 17.2X75-D105; 17.3 versions prior to 17.3R3-S2; 17.4 versions prior to 17.4R1-S7, 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D12, 18.2X75-D30; 18.3 versions prior to 18.3R1-S4, 18.3R2. Junos OS releases prior to 16.1R1 are not affected.

SAP CommonCryptoLib version 8.5.38 or lower is vulnerable to null pointer dereference vulnerability when an unauthenticated attacker sends crafted malicious data in the HTTP requests over the network, this causes the SAP application to crash and has high impact on the availability of the SAP system.

ncmpc through 0.29 is prone to a NULL pointer dereference flaw. If a user uses the chat screen and another client sends a long chat message, a crash and denial of service could occur.

A vulnerability has been found in Open5GS up to 2.7.5. Affected by this issue is the function esm_handle_pdn_connectivity_request of the file src/mme/esm-handler.c of the component AMF Component. The manipulation leads to denial of service. The attack may be launched remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 701505102f514cbde2856cd2ebc9bedb7efc820d. It is recommended to upgrade the affected component.

IP fragmentation denial of service in FreeBSD allows a remote attacker to cause a crash.

The br_mdb_ip_get function in net/bridge/br_multicast.c in the Linux kernel before 2.6.35-rc5 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an IGMP packet, related to lack of a multicast table.

wasm-micro-runtime (aka WebAssembly Micro Runtime or WAMR) 06df58f is vulnerable to NULL Pointer Dereference in function `block_type_get_result_types.

A vulnerability was identified in Open5GS up to 2.7.5. Affected by this vulnerability is the function amf_npcf_am_policy_control_build_create/amf_nsmf_pdusession_build_create_sm_context of the file src/amf/npcf-build.c of the component AMF. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is named cf63dd63197bf61a4b041aa364ba6a6199ab15e4. It is recommended to upgrade the affected component.

A vulnerability was found in Open5GS up to 2.7.5. This affects the function gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The identifier of the patch is f47f2bd4f7274295c5fbb19e2f806753d183d09a. It is recommended to upgrade the affected component.

A vulnerability has been found in Open5GS up to 2.7.5. Affected is the function gmm_state_de_registered/gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to launch the attack remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 1f30edac27f69f61cff50162e980fe58fdeb30ca. It is recommended to upgrade the affected component.

A NULL pointer dereference flaw was found in the way LibVNCServer before 0.9.9 handled certain ClientCutText message. A remote attacker could use this flaw to crash the VNC server by sending a specially crafted ClientCutText message from a VNC client.

It was found in FreeBSD 8.0, 6.3 and 4.9, and OpenBSD 4.6 that a null pointer dereference in ftpd/popen.c may lead to remote denial of service of the ftpd service.

A vulnerability was determined in Open5GS up to 2.7.5. This vulnerability affects the function smf_state_operational of the file src/smf/smf-sm.c of the component SMF. The manipulation of the argument stream leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version v2.7.6 is able to address this issue. The patch is identified as f168f7586a4fa536cee95ae60ac437d997f15b97. It is recommended to upgrade the affected component.

A vulnerability was found in Filseclab Twister Antivirus 8. It has been declared as problematic. This vulnerability affects the function 0x80112053 in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-223288.

A mismatch caused by client-triggered server-sent stream resets between HTTP/2 specifications and the internal architectures of some HTTP/2 implementations may result in excessive server resource consumption leading to denial-of-service (DoS). By opening streams and then rapidly triggering the server to reset them—using malformed frames or flow control errors—an attacker can exploit incorrect stream accounting. Streams reset by the server are considered closed at the protocol level, even though backend processing continues. This allows a client to cause the server to handle an unbounded number of concurrent streams on a single connection. This CVE will be updated as affected product details are released.

If a DHCPv4 client sends a request with some specific options, and Kea fails to find an appropriate subnet for the client, the `kea-dhcp4` process will abort with an assertion failure. This happens only if the client request is unicast directly to Kea; broadcast messages do not cause the problem. This issue affects Kea versions 2.7.1 through 2.7.9, 3.0.0, and 3.1.0.

Proxygen fails to validate that a secondary auth manager is set before dereferencing it. That can cause a denial of service issue when parsing a Certificate/CertificateRequest HTTP2 Frame over a fizz (TLS 1.3) transport. This issue affects Proxygen releases starting from v2018.10.29.00 until the fix in v2018.11.19.00.

A vulnerability classified as problematic was found in Arborator Server. This vulnerability affects the function start of the file project.cgi. The manipulation of the argument project leads to denial of service. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as cdbdbcbd491db65e9d697ab4365605fdfab1a604. It is recommended to apply a patch to fix this issue. VDB-230662 is the identifier assigned to this vulnerability.

NULL Pointer Dereference in µD3TN via non-singleton destination Endpoint Identifier allows remote attacker to reliably cause DoS

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) (AP + CP MDM9x35, or Qualcomm Onechip) software. There is a NULL pointer dereference issue in the IPC socket code. The Samsung ID is SVE-2016-5980 (July 2016).

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to send a specific packet causing the packet forwarding engine (PFE) to crash and restart, resulting in a Denial of Service (DoS). By continuously sending these specific packets, an attacker can repeatedly disable the PFE causing a sustained Denial of Service (DoS). This issue only affects Juniper Networks NFX Series, SRX Series platforms when SSL Proxy is configured. This issue affects Juniper Networks Junos OS on NFX Series and SRX Series: 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S1; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions on NFX Series and SRX Series prior to 18.3R1.

A vulnerability was determined in Open5GS up to 2.7.5. Affected by this issue is the function smf_gsm_state_wait_pfcp_deletion of the file src/smf/gsm-sm.c of the component SMF. The manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is identified as c58b8f081986aaf2a312d73a0a17985518b47fe6. It is recommended to upgrade the affected component.

An issue was discovered in dbus-broker before 31. Multiple NULL pointer dereferences can be found when supplying a malformed XML config file.

NULL pointer dereference vulnerability in ZNC before 0.092 caused by traffic stats when there are unauthenticated connections.

Cisco Unified Personal Communicator 7.0 (1.13056) does not free allocated memory for received data and does not perform validation if memory allocation is successful, causing a remote denial of service condition.

A vulnerability was found in Filseclab Twister Antivirus 8. It has been rated as critical. This issue affects the function 0x8011206B in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-223289 was assigned to this vulnerability.

wasm3 139076a is vulnerable to Denial of Service (DoS).

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize.

A vulnerability was found in Netgear WNDR3700v2 1.0.1.14. It has been rated as problematic. This issue affects some unknown processing of the component Web Management Interface. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-221147.

An issue was discovered in Foxit PDF Editor before 11.0.1 and PDF Reader before 11.0.1 on macOS. It mishandles missing dictionary entries, leading to a NULL pointer dereference, aka CNVD-C-2021-95204.

The _ger_parse_control function in Red Hat Directory Server 8 and the 389 Directory Server allows attackers to cause a denial of service (NULL pointer dereference) via a crafted search query.

cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Starting in version 38.0.0 and prior to version 42.0.4, if `pkcs12.serialize_key_and_certificates` is called with both a certificate whose public key did not match the provided private key and an `encryption_algorithm` with `hmac_hash` set (via `PrivateFormat.PKCS12.encryption_builder().hmac_hash(...)`, then a NULL pointer dereference would occur, crashing the Python process. This has been resolved in version 42.0.4, the first version in which a `ValueError` is properly raised.

An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash. This function can be called on public keys supplied from untrusted sources which could allow an attacker to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but applications might call the function if there are additional security requirements imposed by standards such as FIPS 140-3.

A denial-of-service vulnerability exists in the Pixar Renderman IT Display Service 21.6 (0x67). The vulnerability is present in the parsing of a network packet without proper validation of the packet. The data read by the application is not validated, and its use can lead to a null pointer dereference. The IT application is opened by a user and then listens for a connection on port 4001. An attacker can deliver an attack once the application has been opened.

An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL does not call this function however third party applications might call these functions on untrusted data.

A denial-of-service vulnerability exists in the Pixar Renderman IT Display Service 21.6 (0x69). The vulnerability is present in the parsing of a network packet without proper validation of the packet. The data read-in is not validated, and its use can lead to a null pointer dereference. The IT application is opened by a user and then listens for a connection on port 4001. An attacker can deliver an attack once the application has been opened.

An exploitable denial-of-service vulnerability exists in the thumbnail display functionality of the NT9665X Chipset firmware, running on the Anker Roav A1 Dashcam, version RoavA1SWV1.9. A specially crafted packet can cause a null pointer dereference, resulting in a device reboot.

The deferred_image_processing (aka Deferred image processing) extension before 1.0.2 for TYPO3 allows Denial of Service via the FAL API because of /var/transient disk consumption.

A Null pointer dereference in usr/sbin/httpd in ASUS AC68U 3.0.0.4.384.82230 allows remote attackers to trigger DoS via network packet.

OpenDMARC 1.4.2 contains a null pointer dereference vulnerability in /OpenDMARC/libopendmarc/opendmarc_policy.c.

HTTP.sys Denial of Service Vulnerability