A vulnerability in the management interface in Brocade Fabric OS Versions before Brocade Fabric OS v9.0.0 could allow a remote attacker to perform a denial of service attack on the vulnerable host.

A carefully crafted request uri-path can cause mod_proxy_uwsgi to read above the allocated memory and crash (DoS). This issue affects Apache HTTP Server versions 2.4.30 to 2.4.48 (inclusive).

Malformed requests may cause the server to dereference a NULL pointer. This issue affects Apache HTTP Server 2.4.48 and earlier.

An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.

An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.

CA Unified Infrastructure Management (Nimsoft/UIM) 20.1, 20.3.x, and 9.20 and below contains a null pointer dereference vulnerability in the robot (controller) component. A remote attacker can crash the Controller service.

An issue found in TCPreplay tcprewrite v.4.4.3 allows a remote attacker to cause a denial of service via the tcpedit_dlt_cleanup function at plugins/dlt_plugins.c.

An issue found in TCPReplay v.4.4.3 allows a remote attacker to cause a denial of service via the read_hexstring function at the utils.c:309 endpoint.

An issue found in TCPprep v.4.4.3 allows a remote attacker to cause a denial of service via the macinstring function.

CA Service Catalog 17.2 and 17.3 contain a vulnerability in the default configuration of the Setup Utility that may allow a remote attacker to cause a denial of service condition.

An issue was discovered in tcpreplay tcpprep v4.3.3. There is a heap buffer overflow vulnerability in MemcmpInterceptorCommon() that can make tcpprep crash and cause a denial of service.

An issue was discovered in tcpreplay tcpprep v4.3.3. There is a heap buffer overflow vulnerability in get_l2len() that can make tcpprep crash and cause a denial of service.

Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f).

Running security scans against the SAN switch can cause config and secnotify processes within the firmware before Brocade Fabric OS v9.0.0, v8.2.2d and v8.2.1e to consume all memory leading to denial of service impacts possibly including a switch panic.

Brocade SANnav before v.2.1.0a could allow remote attackers cause a denial-of-service condition due to a lack of proper validation, of the length of user-supplied data as name for custom field name.

In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).

A memory leak in the fastrpc_dma_buf_attach() function in drivers/misc/fastrpc.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering dma_get_sgtable() failures, aka CID-fc739a058d99.

A memory leak in the rpmsg_eptdev_write_iter() function in drivers/rpmsg/rpmsg_char.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering copy_from_iter_full() failures, aka CID-bbe692e349e2.

An issue found in TCPrewrite v.4.4.3 allows a remote attacker to cause a denial of service via the ports2PORT function at the portmap.c:69 endpoint.

A memory leak in the crypto_reportstat() function in crypto/crypto_user_stat.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering crypto_reportstat_alg() failures, aka CID-c03b04dcdba1.

A memory leak in the adis_update_scan_mode_burst() function in drivers/iio/imu/adis_buffer.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-9c0530e898f3.

An issue found in TCPprep v.4.4.3 allows a remote attacker to cause a denial of service via the cidr2cidr function at the cidr.c:178 endpoint.

A memory leak in the adis_update_scan_mode() function in drivers/iio/imu/adis_buffer.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-ab612b1daf41.

An issue found in TCPreplay TCPprep v.4.4.3 allows a remote attacker to cause a denial of service via the parse endpoints function.

A memory leak in the gs_can_open() function in drivers/net/can/usb/gs_usb.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-fb5be6a7b486.

An issue found in TCPprep v.4.4.3 allows a remote attacker to cause a denial of service via the parse_list function at the list.c:81 endpoint.

Two memory leaks in the v3d_submit_cl_ioctl() function in drivers/gpu/drm/v3d/v3d_gem.c in the Linux kernel before 5.3.11 allow attackers to cause a denial of service (memory consumption) by triggering kcalloc() or v3d_job_init() failures, aka CID-29cd13cfd762.

Pivotal RabbitMQ, versions 3.7.x prior to 3.7.21 and 3.8.x prior to 3.8.1, and RabbitMQ for Pivotal Platform, 1.16.x versions prior to 1.16.7 and 1.17.x versions prior to 1.17.4, contain a web management plugin that is vulnerable to a denial of service attack. The "X-Reason" HTTP Header can be leveraged to insert a malicious Erlang format string that will expand and consume the heap, resulting in the server crashing.

In Apache Thrift all versions up to and including 0.12.0, a server or client may run into an endless loop when feed with specific input data. Because the issue had already been partially fixed in version 0.11.0, depending on the installed version it affects only certain language bindings.

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

Stack consumption vulnerability in the dissect_ber_choice function in the BER dissector in Wireshark 1.2.x through 1.2.15 and 1.4.x through 1.4.4 might allow remote attackers to cause a denial of service (infinite loop) via vectors involving self-referential ASN.1 CHOICE values.

An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.

Loop with unreachable exit condition may occur due to improper handling of unsupported input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables

Improper file stream access in /desktop_app/file.ajax.php?action=uploadfile in Bitrix24 22.0.300 allows unauthenticated remote attackers to cause denial-of-service via a crafted "tmp_url".

A flaw was found in undertow. This issue makes achieving a denial of service possible due to an unexpected handshake status updated in SslConduit, where the loop never terminates.

Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1.

In Contiki 3.0, potential nonterminating acknowledgment loops exist in the Telnet service. When the negotiated options are already disabled, servers still respond to DONT and WONT requests with WONT or DONT commands, which may lead to infinite acknowledgment loops, denial of service, and excessive CPU consumption.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

When calling bson_utf8_validate on some inputs a loop with an exit condition that cannot be reached may occur, i.e. an infinite loop. This issue affects All MongoDB C Driver versions prior to versions 1.25.0.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache NimBLE.  Specially crafted GATT operation can cause infinite loop in GATT server leading to denial of service in Bluetooth stack or device. This issue affects Apache NimBLE: through 1.6.0. Users are recommended to upgrade to version 1.7.0, which fixes the issue.

In Wireshark 2.2.0 to 2.2.12 and 2.4.0 to 2.4.4, the DMP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dmp.c by correctly supporting a bounded number of Security Categories for a DMP Security Classification.

Transient DOS when NAS receives ODAC criteria of length 1 and type 1 in registration accept OTA.

A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library.

qubes-mirage-firewall (aka Mirage firewall for QubesOS) 0.8.x through 0.8.3 allows guest OS users to cause a denial of service (CPU consumption and loss of forwarding) via a crafted multicast UDP packet (IP address range of 224.0.0.0 through 239.255.255.255).

NLnet Labs Unbound version 1.18.0 up to and including version 1.19.1 contain a vulnerability that can cause denial of service by a certain code path that can lead to an infinite loop. Unbound 1.18.0 introduced a feature that removes EDE records from responses with size higher than the client's advertised buffer size. Before removing all the EDE records however, it would try to see if trimming the extra text fields on those records would result in an acceptable size while still retaining the EDE codes. Due to an unchecked condition, the code that trims the text of the EDE records could loop indefinitely. This happens when Unbound would reply with attached EDE information on a positive reply and the client's buffer size is smaller than the needed space to include EDE records. The vulnerability can only be triggered when the 'ede: yes' option is used; non default configuration. From version 1.19.2 on, the code is fixed to avoid looping indefinitely.

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.