Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An authenticated command injection vulnerability exists in the AOS-CX command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands on the underlying operating system as a privileged user on the affected switch. This allows an attacker to fully compromise the underlying operating system on the device running AOS-CX.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Aruba Instant 4.x prior to 6.4.4.8-4.2.4.12, 6.5.x prior to 6.5.4.11, 8.3.x prior to 8.3.0.6, and 8.4.x prior to 8.4.0.1 allows Command injection.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

An attacker is able to remotely inject arbitrary commands by sending especially crafted packets destined to the PAPI (Aruba Networks AP Management protocol) UDP port (8211) of access-pointsor controllers in Aruba 9000 Gateway; Aruba 7000 Series Mobility Controllers; Aruba 7200 Series Mobility Controllers version(s): 2.1.0.1, 2.2.0.0 and below; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below ; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below.

Command injection vulnerability in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

WBCE CMS 1.5.3 has a command execution vulnerability via admin/languages/install.php.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during a password change resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.

setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field.

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, Magento admin users with access to the customer media could execute code on the server. Versions 19.4.22 and 20.0.19 contain a patch for this issue.

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, an administrator with the permissions to upload files via DataFlow and to create products was able to execute arbitrary code via the convert profile. Versions 19.4.22 and 20.0.19 contain a patch for this issue.

Vulnerability in admin_ip.php in Seacms v13.1, when action=set, allows attackers to control IP parameters that are written to the data/admin/ip.php file and could result in arbitrary command execution.

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, Custom Layout enabled admin users to execute arbitrary commands via block methods. Versions 19.4.22 and 20.0.19 contain patches for this issue.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.50, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.1.62, and RAX80 before 1.0.1.62.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6250 before 1.0.4.36, R6300v2 before 1.0.4.36, R6400 before 1.0.1.50, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.8, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R6900P before 1.3.2.132, R7100LG before 1.0.0.52, R7900 before 1.0.3.10, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, and RAX80 before 1.0.1.40.

A command-injection vulnerability in an authenticated Telnet connection in Poly (formerly Polycom) CX5500 and CX5100 1.3.5 leads an attacker to Privilege Escalation and Remote Code Execution capability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

Multiple OS command injection vulnerabilities exist in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `dest` POST parameter.

Multiple OS command injection vulnerabilities exist in the adm.cgi sch_reboot() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to a arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `restart_week` POST parameter.

An os command injection vulnerability exists in the firewall.cgi iptablesWebsFilterRun() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

TELSAT marKoni FM Transmitters are vulnerable to a command injection vulnerability through the manipulation of settings and could allow an attacker to gain unauthorized access to the system with administrative privileges.

Multiple OS command injection vulnerabilities exist in the adm.cgi sch_reboot() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to a arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `restart_hour` POST parameter.

A vulnerability has been identified in SINEMA Remote Connect Client (All versions < V3.2 HF1). The system service of affected applications is vulnerable to command injection due to missing server side input sanitation when loading VPN configurations. This could allow an administrative remote attacker running a corresponding SINEMA Remote Connect Server to execute arbitrary code with system privileges on the client system.

Multiple OS command injection vulnerabilities exist in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `custom_interface` POST parameter.

Multiple OS command injection vulnerabilities exist in the adm.cgi sch_reboot() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to a arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `restart_min` POST parameter.

An os command injection vulnerability exists in the nas.cgi remove_dir() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Multiple OS command injection vulnerabilities exist in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `gateway` POST parameter.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

A command-injection issue in the Certificate Signing Request (CSR) functionality in R-HUB TurboMeeting through 8.x allows authenticated attackers with administrator privileges to execute arbitrary commands on the underlying server as root.

Microsoft SharePoint Server Remote Code Execution Vulnerability

Microsoft SharePoint Server Remote Code Execution Vulnerability

An os command injection vulnerability exists in the adm.cgi set_ledonoff() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Firmware in KAON AR2140 routers prior to version 4.2.16 is vulnerable to a shell command injection via sending a crafted request to one of the endpoints. In order to exploit this vulnerability, one has to have access to the administrative portal of the router.

Netwrix CoSoSys Endpoint Protector through 5.9.3 and CoSoSys Unify through 7.0.6 contain a remote code execution vulnerability in the shadowing component of the Endpoint Protector and Unify agent which allows an attacker with administrative access to the Endpoint Protector or Unify server to overwrite sensitive configuration and subsequently execute system commands with SYSTEM/root privileges on a chosen client endpoint.

Netgear XR1000 v1.0.0.64 is vulnerable to command injection in usb_remote_smb_conf.cgi via the share_name parameter.

Tenda O3V2 with firmware versions V1.0.0.10 and V1.0.0.12 was discovered to contain a Blind Command Injection via dest parameter in /goform/getTraceroute. This vulnerability allows attackers to execute arbitrary commands with root privileges. Authentication is required to exploit this vulnerability.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later

There is a command injection vulnerability in some Hikvision NVRs. This could allow an authenticated user with administrative rights to execute arbitrary commands.