An issue was discovered on LG mobile devices with Android OS 9.0 and 10 software. The Wi-Fi subsystem has incorrect input validation, leading to a crash. The LG ID is LVE-SMP-200022 (October 2020).

Nanopb is a small code-size Protocol Buffers implementation. In Nanopb before versions 0.4.4 and 0.3.9.7, decoding specifically formed message can leak memory if dynamic allocation is enabled and an oneof field contains a static submessage that contains a dynamic field, and the message being decoded contains the submessage multiple times. This is rare in normal messages, but it is a concern when untrusted data is parsed. This is fixed in versions 0.3.9.7 and 0.4.4. The following workarounds are available: 1) Set the option `no_unions` for the oneof field. This will generate fields as separate instead of C union, and avoids triggering the problematic code. 2) Set the type of the submessage field inside oneof to `FT_POINTER`. This way the whole submessage will be dynamically allocated and the problematic code is not executed. 3) Use an arena allocator for nanopb, to make sure all memory can be released afterwards.

Dovecot before 2.3.13 has Improper Input Validation in lda, lmtp, and imap, leading to an application crash via a crafted email message with certain choices for ten thousand MIME parts.

Dell BSAFE Micro Edition Suite, versions prior to 4.5.1, contain a Buffer Over-Read Vulnerability.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 federated server is vulnerable to a denial of service when a specially crafted cursor is used. IBM X-Force ID: 269367.

The affected product does not properly validate input, which may allow an attacker to execute a denial-of-service attack on the NIO 50 (all versions).

On QFX10000 Series devices using Juniper Networks Junos OS when configured as transit IP/MPLS penultimate hop popping (PHP) nodes with link aggregation group (LAG) interfaces, an Improper Validation of Specified Index, Position, or Offset in Input weakness allows an attacker sending certain IP packets to cause multiple interfaces in the LAG to detach causing a Denial of Service (DoS) condition. Continued receipt and processing of these packets will sustain the Denial of Service. This issue affects IPv4 and IPv6 packets. Packets of either type can cause and sustain the DoS event. These packets can be destined to the device or be transit packets. On devices such as the QFX10008 with line cards, line cards can be restarted to restore service. On devices such as the QFX10002 you can restart the PFE service, or reboot device to restore service. This issue affects: Juniper Networks Junos OS on QFX10000 Series: All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S1. An indicator of compromise may be seen by issuing the command: request pfe execute target fpc0 command "show jspec pechip[3] registers ps l2_node 10" timeout 0 | refresh 1 | no-more and reviewing for backpressured output; for example: GOT: 0x220702a8 pe.ps.l2_node[10].pkt_cnt 00000076 GOT: 0x220702b4 pe.ps.l2_node[10].backpressured 00000002 <<<< STICKS HERE and requesting detail on the pepic wanio: request pfe execute target fpc0 command "show pepic 0 wanio-info" timeout 0 | no-more | match xe-0/0/0:2 GOT: 3 xe-0/0/0:2 10 6 3 0 1 10 189 10 0x6321b088 <<< LOOK HERE as well as looking for tail drops looking at the interface queue, for example: show interfaces queue xe-0/0/0:2 resulting in: Transmitted: Total-dropped packets: 1094137 0 pps << LOOK HERE

A vulnerability in the packet processing functionality of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted H.323 traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to either reboot normally or reboot into maintenance mode, which could result in a DoS condition on the device.

A S+ Operations and S+ Historian service is subject to a DoS by special crafted messages. An attacker might use this flaw to make it crash or even execute arbitrary code on the machine where the service is hosted.

An issue was discovered in the _send_secure_msg() function of yubihsm-shell through 2.0.2. The function does not validate the embedded length field of a message received from the device. This could lead to an oversized memcpy() call that will crash the running process. This could be used by an attacker to cause a denial of service.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. OpenBao before v2.3.0 allowed an attacker to perform unauthenticated, unaudited cancellation of root rekey and recovery rekey operations, effecting a denial of service. In OpenBao v2.2.0 and later, manually setting the configuration option `disable_unauthed_rekey_endpoints=true` allows an operator to deny these rarely-used endpoints on global listeners. A patch is available at commit fe75468822a22a88318c6079425357a02ae5b77b. In a future OpenBao release communicated on OpenBao's website, the maintainers will set this to `true` for all users and provide an authenticated alternative. As a workaround, if an active proxy or load balancer sits in front of OpenBao, an operator can deny requests to these endpoints from unauthorized IP ranges.

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 software. A service crash may occur because of incorrect input validation. The LG ID is LVE-SMP-200013 (July 2020).

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 software. An application crash can occur because of incorrect application-level input validation. The LG ID is LVE-SMP-200018 (July 2020).

A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.

An Improper Input Validation vulnerability in the routing protocol daemon (rpd) of Juniper Networks allows an attacker to cause a Denial of Service (DoS )to the device upon receiving and processing a specific malformed ISO VPN BGP UPDATE packet. Continued receipt of this packet will cause a sustained Denial of Service condition. This issue affects: * Juniper Networks Junos OS: * All versions prior to 20.4R3-S6; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S3; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R2-S2, 22.1R3; * 22.2 versions prior to 22.2R2-S1, 22.2R3; * 22.3 versions prior to 22.3R1-S2, 22.3R2. Juniper Networks Junos OS Evolved: * All versions prior to 20.4R3-S6-EVO; * 21.1-EVO version 21.1R1-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO versions prior to 21.3R3-S3-EVO; * 21.4-EVO versions prior to 21.4R3-S3-EVO; * 22.1-EVO versions prior to 22.1R3-EVO; * 22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions prior to 22.3R1-S2-EVO, 22.3R2-EVO.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

An improper input validation vulnerability in the configuration daemon of Palo Alto Networks PAN-OS Panorama allows for a remote unauthenticated user to send a specifically crafted registration request to the device that causes the configuration service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS Panorama services by restarting the device and putting it into maintenance mode. This issue affects: All versions of PAN-OS 7.1, PAN-OS 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7; PAN-OS 9.1 versions earlier than 9.1.0.

A denial of service issue was addressed with improved input validation. This issue is fixed in iOS 13.6 and iPadOS 13.6. A remote attacker may cause an unexpected application termination.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service.

An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.

In the MZ Automation LibIEC61850 in versions prior to 1.5.1 an unauthenticated attacker can craft a goose message, which may result in a denial of service.

A vulnerability in version 0.90 of the Open Floodlight SDN controller software could allow an attacker with access to the OpenFlow control network to selectively disconnect individual switches from the SDN controller, causing degradation and eventually denial of network access to all devices connected to the targeted switch.

An Improper Input Validation vulnerability in the Packet Forwarding Engine of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause memory leak, leading to Denial of Service (DoS). On all Junos OS QFX5000 Series platforms, when pseudo-VTEP (Virtual Tunnel End Point) is configured under EVPN-VXLAN scenario, and specific DHCP packets are transmitted, DMA memory leak is observed. Continuous receipt of these specific DHCP packets will cause memory leak to reach 99% and then cause the protocols to stop working and traffic is impacted, leading to Denial of Service (DoS) condition. A manual reboot of the system recovers from the memory leak. To confirm the memory leak, monitor for "sheaf:possible leak" and "vtep not found" messages in the logs. This issue affects: Juniper Networks Junos OS QFX5000 Series: * All versions prior to 20.4R3-S6; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S4; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R3-S2; * 22.2 versions prior to 22.2R2-S2, 22.2R3; * 22.3 versions prior to 22.3R2-S1, 22.3R3; * 22.4 versions prior to 22.4R1-S2, 22.4R2.

Brocade SANnav before v.2.1.0a could allow remote attackers cause a denial-of-service condition due to a lack of proper validation, of the length of user-supplied data as name for custom field name.

LibRaw before 0.20-RC1 lacks a thumbnail size range check. This affects decoders/unpack_thumb.cpp, postprocessing/mem_image.cpp, and utils/thumb_utils.cpp. For example, malloc(sizeof(libraw_processed_image_t)+T.tlength) occurs without validating T.tlength.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 federated server is vulnerable to a denial of service when a specially crafted cursor is used. IBM X-Force ID: 268759.

Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.

On Juniper Networks Junos OS devices configured with DHCPv6 relay enabled, receipt of a specific DHCPv6 packet might crash the jdhcpd daemon. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of specific crafted DHCP messages will repeatedly crash jdhcpd, leading to an extended Denial of Service (DoS) condition. Only DHCPv6 packet can trigger this issue. DHCPv4 packet cannot trigger this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.

On Juniper Networks Junos OS and Junos OS Evolved devices, the receipt of a specific BGP UPDATE packet causes an internal counter to be incremented incorrectly, which over time can lead to the routing protocols process (RPD) crash and restart. This issue affects both IBGP and EBGP multihop deployment in IPv4 or IPv6 network. This issue affects: Juniper Networks Junos OS: 17.2X75 versions prior to 17.2X75-D105.19; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.2X75 versions prior to 18.2X75-D13, 18.2X75-D411.1, 18.2X75-D420.18, 18.2X75-D52.3, 18.2X75-D60; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS Evolved: any releases prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R1.

An improper use of a validation framework when processing incoming genuine BGP packets within Juniper Networks RPD (routing protocols process) daemon allows an attacker to crash RPD thereby causing a Denial of Service (DoS) condition. This framework requires these packets to be passed. By continuously sending any of these types of formatted genuine packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Authentication to the BGP peer is not required. This issue can be initiated or propagated through eBGP and iBGP and can impact devices in either modes of use as long as the devices are configured to support the compromised framework and a BGP path is activated or active. This issue affects: Juniper Networks Junos OS 16.1 versions 16.1R7-S6 and later versions prior to 16.1R7-S8; 17.3 versions 17.3R2-S5, 17.3R3-S6 and later versions prior to 17.3R3-S8; 17.4 versions 17.4R2-S7, 17.4R3 and later versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions 18.1R3-S7 and later versions prior to 18.1R3-S10; 18.2 versions 18.2R2-S6, 18.2R3-S2 and later versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions 18.2X75-D12, 18.2X75-D32, 18.2X75-D33, 18.2X75-D51, 18.2X75-D60, 18.2X75-D411, 18.2X75-D420 and later versions prior to 18.2X75-D32, 18.2X75-D33, 18.2X75-D420, 18.2X75-D52, 18.2X75-D60, 18.2X75-D65, 18.2X75-D70;(*1) 18.3 versions 18.3R1-S6, 18.3R2-S3, 18.3R3 and later versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions 18.4R1-S5, 18.4R2-S4, 18.4R3 and later versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S3(*2); 19.1 versions 19.1R1-S3, 19.1R2 and later versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3-S2; 19.2 versions 19.2R1-S2, 19.2R2 and later versions prior to 19.2R1-S5, 19.2R2, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affect Junos OS prior to 16.1R1. This issue affects IPv4 and IPv6 traffic.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, by controlling the `fill` argument of tf.strings.as_string, a malicious attacker is able to trigger a format string vulnerability due to the way the internal format use in a `printf` call is constructed. This may result in segmentation fault. The issue is patched in commit 33be22c65d86256e6826666662e40dbdfe70ee83, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5 CLI is vulnerable to a denial of service when a specially crafted request is used. IBM X-Force ID: 268073.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, changing the TensorFlow's `SavedModel` protocol buffer and altering the name of required keys results in segfaults and data corruption while loading the model. This can cause a denial of service in products using `tensorflow-serving` or other inference-as-a-service installments. Fixed were added in commits f760f88b4267d981e13f4b302c437ae800445968 and fcfef195637c6e365577829c4d67681695956e7d (both going into TensorFlow 2.2.0 and 2.3.0 but not yet backported to earlier versions). However, this was not enough, as #41097 reports a different failure mode. The issue is patched in commit adf095206f25471e864a8e63a0f1caef53a0e3a6, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Pexip Infinity before 23.4 has a lack of input validation, leading to temporary denial of service via H.323.

HCL Domino is susceptible to a Denial of Service vulnerability caused by improper validation of user-supplied input. A remote unauthenticated attacker could exploit this vulnerability using a specially-crafted email message to hang the server. Versions previous to releases 9.0.1 FP10 IF6, 10.0.1 FP5 and 11.0.1 are affected.

HCL Domino is susceptible to a Denial of Service vulnerability due to improper validation of user-supplied input, potentially giving an attacker the ability to crash the server. Versions previous to release 9.0.1 FP10 IF6 and release 10.0.1 are affected.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

The Zend Engine in PHP before 5.4.16 RC1, and 5.5.0 before RC2, does not properly determine whether a parser error occurred, which allows context-dependent attackers to cause a denial of service (memory consumption and application crash) via a crafted function definition, as demonstrated by an attack within a shared web-hosting environment. NOTE: the vendor's http://php.net/security-note.php page says "for critical security situations you should be using OS-level security by running multiple web servers each as their own user id.

MediaTek microchips, as used in NETGEAR devices through 2021-12-13 and other devices, mishandle attempts at Wi-Fi authentication flooding. (Affected Chipsets MT7603E, MT7612, MT7613, MT7615, MT7622, MT7628, MT7629, MT7915; Affected Software Versions 7.4.0.0).

Grin through 2.1.1 has Insufficient Validation.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

HCL Domino is susceptible to a Denial of Service (DoS) vulnerability due to insufficient validation of input to its public API. An unauthenticated attacker could could exploit this vulnerability to crash the Domino server.

HCL Notes is susceptible to a Denial of Service vulnerability caused by improper validation of user-supplied input. A remote unauthenticated attacker could exploit this vulnerability using a specially-crafted email message to hang the client. Versions 9, 10 and 11 are affected.

Pexip Infinity 23.x before 23.3 has improper input validation, leading to a temporary software abort via RTP.

Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial of service in the device.

NaviServer 4.99.4 to 4.99.19 allows denial of service due to the nsd/driver.c ChunkedDecode function not properly validating the length of a chunk. A remote attacker can craft a chunked-transfer request that will result in a negative value being passed to memmove via the size parameter, causing the process to crash.

Improper session invalidation in the component /srms/change-password.php of PHPGurukul Student Result Management System v2.0 allows attackers to execute a session hijacking attack.

Dell EMC Data Protection Central version 19.5 contains an Improper Input Validation Vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service.