Venki Supravizio BPM 10.1.2 does not limit the number of authentication attempts. An unauthenticated user may exploit this vulnerability to launch a brute-force authentication attack against the Login page.

OpenClinic GA versions 5.09.02 and 5.89.05b may allow an attacker to bypass the system’s account lockout protection, which may allow brute force password attacks.

The Phonemes mode in Pwgen 2.06 generates predictable passwords, which makes it easier for context-dependent attackers to guess the password via a brute-force attack.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It has brute-force attack mishandling because the CAS service lacks a limit on login failures.

An issue was discovered on Samsung mobile devices with O(8.x) (with TEEGRIS) software. The Gatekeeper Trustlet allows a brute-force attack on user credentials. The Samsung ID is SVE-2020-16908 (June 2020).

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab OAuth endpoint was vulnerable to brute-force attacks through a specific parameter.

OX App Suite 7.10.1 to 7.10.3 has improper input validation for rate limits with a crafted User-Agent header, spoofed vacation notices, and /apps/load memory consumption.

IBM Tivoli Key Lifecycle Manager 3.0.1 and 4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 184156.

Lack of rate limiting in M-Files Server and M-Files Web products with versions before 21.12.10873.0 in certain type of user accounts allows unlimited amount of attempts and therefore makes brute-forcing login accounts easier.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

A brute-force protection bypass in CAPTCHA protection in ASUS ROG Rapture GT-AX11000, RT-AX3000, RT-AX55, RT-AX56U, RT-AX56U_V2, RT-AX58U, RT-AX82U, RT-AX82U GUNDAM EDITION, RT-AX86 Series(RT-AX86U/RT-AX86S), RT-AX86U ZAKU II EDITION, RT-AX88U, RT-AX92U, TUF Gaming AX3000, TUF Gaming AX5400 (TUF-AX5400), ASUS ZenWiFi XD6, ASUS ZenWiFi AX (XT8) before 3.0.0.4.386.45898, and RT-AX68U before 3.0.0.4.386.45911, allows a remote attacker to attempt any number of login attempts via sending a specific HTTP request.

RAGFlow through 0.18.1 allows account takeover because it is possible to conduct successful brute-force attacks against email verification codes to perform arbitrary account registration, login, and password reset. Codes are six digits and there is no rate limiting.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Exynos7885, Exynos8895, and Exynos9810 chipsets) software. The Gatekeeper trustlet allows a brute-force attack on the screen lock password. The Samsung ID is SVE-2019-14575 (January 2020).

The cookie session ID is of insufficient length and can be exploited by brute force, which may allow a remote attacker to obtain a valid session, bypass authentication, and manipulate the transmitter.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

In Sorcery before 0.15.0, there is a brute force vulnerability when using password authentication via Sorcery. The brute force protection submodule will prevent a brute force attack for the defined lockout period, but once expired, protection will not be re-enabled until a user or malicious actor logs in successfully. This does not affect users that do not use the built-in brute force protection submodule, nor users that use permanent account lockout. This has been patched in 0.15.0.

There is no limit on the number of login attempts in the web server for the SNAP PAC S1 Firmware version R10.3b. This could allow for a brute-force attack on the built-in web server login.

UVDesk Community Skeleton v1.1.1 allows unauthenticated attackers to perform brute force attacks on the login page to gain access to the application.

Windows IIS Server Elevation of Privilege Vulnerability

An unauthorized user could gain account access to IQ Wifi 6 versions prior to 2.0.2 by conducting a brute force authentication attack.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

SpliceCom Maximiser Soft PBX v1.5 and before does not restrict excessive authentication attempts, allowing attackers to bypass authentication via a brute force attack.

The number of login attempts is not limited. This could allow an attacker to perform a brute force on HTTP basic authentication.

The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

D-Link DSL-224 firmware version 3.0.10 CWE-307: Improper Restriction of Excessive Authentication Attempts

Improper Restriction of Excessive Authentication Attempts in GitHub repository froxlor/froxlor prior to 2.0.20.

user_oidc app is an OpenID Connect user backend for Nextcloud. Authentication can be broken/bypassed in user_oidc app. It is recommended that the Nextcloud user_oidc app is upgraded to 1.3.2

BlackVue DR750-2CH LTE v.1.012_2022.10.26 was discovered to contain a weak default passphrase which can be easily cracked via a brute force attack if the WPA2 handshake is intercepted.

DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.

Improper restriction of excessive authentication attempts in the SSHGuard component of Netgate pfSense Plus software v22.05.1 and pfSense CE software v2.6.0 allows attackers to bypass brute force protection mechanisms via crafted web requests.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 2023.Q1.1223.

An issue in the user login box of CSCMS v4.0 allows attackers to hijack user accounts via brute force attacks.

A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

Snap One Wattbox WB-300-IP-3 versions WB10.9a17 and prior could bypass the brute force protection, allowing multiple attempts to force a login.

Improper Authentication in Lin-CMS-Flask v0.1.1 allows remote attackers to launch brute force login attempts without restriction via the 'login' function in the component 'app/api/cms/user.py'.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

The authentication implementation on the xArm controller has very low entropy, making it vulnerable to a brute-force attack. There is no mechanism in place to mitigate or lockout automated attempts to gain access.

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0

Improper Restriction of Excessive Authentication Attempts in GitHub repository azuracast/azuracast prior to 0.18.3.

Moxa IKS and EDS do not implement sufficient measures to prevent multiple failed authentication attempts, which may allow an attacker to discover passwords via brute force attack.

A lack of rate limiting on the password reset endpoint of Chamberlain myQ v5.222.0.32277 (on iOS) allows attackers to compromise user accounts via a bruteforce attack.

IBM Robotic Process Automation with Automation Anywhere 11 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161411.

Plataformatec Devise version 4.5.0 and earlier, using the lockable module contains a CWE-367 vulnerability in The `Devise::Models::Lockable` class, more specifically at the `#increment_failed_attempts` method. File location: lib/devise/models/lockable.rb that can result in Multiple concurrent requests can prevent an attacker from being blocked on brute force attacks. This attack appear to be exploitable via Network connectivity - brute force attacks. This vulnerability appears to have been fixed in 4.6.0 and later.

Microsoft Exchange Server Elevation of Privilege Vulnerability

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.