In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix mas_empty_area_rev() null pointer dereference Currently the code calls mas_start() followed by mas_data_end() if the maple state is MA_START, but mas_start() may return with the maple state node == NULL. This will lead to a null pointer dereference when checking information in the NULL node, which is done in mas_data_end(). Avoid setting the offset if there is no node by waiting until after the maple state is checked for an empty or single entry state. A user could trigger the events to cause a kernel oops by unmapping all vmas to produce an empty maple tree, then mapping a vma that would cause the scenario described above.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? memcpy_orig+0xd5/0x140 rxe_mr_copy+0x1c3/0x200 [rdma_rxe] ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe] copy_data+0xa5/0x230 [rdma_rxe] rxe_requester+0xd9b/0xf70 [rdma_rxe] ? finish_task_switch.isra.0+0x99/0x2e0 rxe_sender+0x13/0x40 [rdma_rxe] do_task+0x68/0x1e0 [rdma_rxe] process_one_work+0x177/0x330 worker_thread+0x252/0x390 ? __pfx_worker_thread+0x10/0x10 This change ensures the variable is available for subsequent operations that require it. [1] https://lore.kernel.org/linux-rdma/6a1f3e8f-deb0-49f9-bc69-a9b03ecfcda7@fujitsu.com/

In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here.

In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix uninitialized values during inode evict If an iget fails due to not being able to retrieve information from the server then the inode structure is only partially initialized. When the inode gets evicted, references to uninitialized structures (like fscache cookies) were being made. This patch checks for a bad_inode before doing anything other than clearing the inode from the cache. Since the inode is bad, it shouldn't have any state associated with it that needs to be written back (and there really isn't a way to complete those anyways).

In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue.

In the Linux kernel, the following vulnerability has been resolved: spi: fix null pointer dereference within spi_sync If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix missing lock on sync reset reload On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […]

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix memory leak in hci_req_sync_complete() In 'hci_req_sync_complete()', always free the previous sync request state before assigning reference to a new one.

In the Linux kernel, the following vulnerability has been resolved: closures: Change BUG_ON() to WARN_ON() If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON() For reference, this has popped up once in the CI, and we'll need more info to debug it: 03240 ------------[ cut here ]------------ 03240 kernel BUG at lib/closure.c:21! 03240 kernel BUG at lib/closure.c:21! 03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 03240 Modules linked in: 03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570 03240 Hardware name: linux,dummy-virt (DT) 03240 Workqueue: btree_update btree_interior_update_work 03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 03240 pc : closure_put+0x224/0x2a0 03240 lr : closure_put+0x24/0x2a0 03240 sp : ffff0000d12071c0 03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360 03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040 03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168 03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001 03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974 03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d 03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e 03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b 03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954 03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000 03240 Call trace: 03240 closure_put+0x224/0x2a0 03240 bch2_check_for_deadlock+0x910/0x1028 03240 bch2_six_check_for_deadlock+0x1c/0x30 03240 six_lock_slowpath.isra.0+0x29c/0xed0 03240 six_lock_ip_waiter+0xa8/0xf8 03240 __bch2_btree_node_lock_write+0x14c/0x298 03240 bch2_trans_lock_write+0x6d4/0xb10 03240 __bch2_trans_commit+0x135c/0x5520 03240 btree_interior_update_work+0x1248/0x1c10 03240 process_scheduled_works+0x53c/0xd90 03240 worker_thread+0x370/0x8c8 03240 kthread+0x258/0x2e8 03240 ret_from_fork+0x10/0x20 03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000) 03240 ---[ end trace 0000000000000000 ]--- 03240 Kernel panic - not syncing: Oops - BUG: Fatal exception 03240 SMP: stopping secondary CPUs 03241 SMP: failed to stop secondary CPUs 13,15 03241 Kernel Offset: disabled 03241 CPU features: 0x00,00000003,80000008,4240500b 03241 Memory Limit: none 03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- 03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s

In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix incorrect descriptor free behavior ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc() The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an unsuccessful status. In such cases, the elsiocb is not issued, the completion is not called, and thus the elsiocb resource is leaked. Check return value after calling lpfc_sli4_resume_rpi() and conditionally release the elsiocb resource.

drivers/scsi/bfa/bfa_core.c in the Linux kernel before 2.6.35 does not initialize a certain port data structure, which allows local users to cause a denial of service (system crash) via read operations on an fc_host statistics file.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Return error if block header overflows file Return an error from cs_dsp_power_up() if a block header is longer than the amount of data left in the file. The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop while there was enough data left in the file for a valid region. This protected against overrunning the end of the file data, but it didn't abort the file processing with an error.

In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().

In the Linux kernel, the following vulnerability has been resolved: mm/shmem: disable PMD-sized page cache if needed For shmem files, it's possible that PMD-sized page cache can't be supported by xarray. For example, 512MB page cache on ARM64 when the base page size is 64KB can't be supported by xarray. It leads to errors as the following messages indicate when this sort of xarray entry is split. WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \ nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \ nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \ libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \ net_failover virtio_console virtio_blk failover dimlib virtio_mmio CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff8000882af5f0 x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858 x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0 x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a shmem file isn't represented by a multi-index entry and doesn't have this limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache").

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix for possible memory corruption Init Control Block is dereferenced incorrectly. Correctly dereference ICB

In the Linux kernel, the following vulnerability has been resolved: block: fix module reference leakage from bdev_open_by_dev error path At the time bdev_may_open() is called, module reference is grabbed already, hence module reference should be released if bdev_may_open() failed. This problem is found by code review.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix a memleak in lima_heap_alloc When lima_vm_map_bo fails, the resources need to be deallocated, or there will be memleaks.

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: platform_get_resource replaced by wrong function The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource.

In the Linux kernel, the following vulnerability has been resolved: selinux: avoid dereference of garbage after mount failure In case kern_mount() fails and returns an error pointer return in the error branch instead of continuing and dereferencing the error pointer. While on it drop the never read static variable selinuxfs_mount.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix null pointer access when abort scan During cancel scan we might use vif that weren't scanning. Fix this by using the actual scanning vif.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix transmit scheduler resource leak Inorder to support shaping and scheduling, Upon class creation Netdev driver allocates trasmit schedulers. The previous patch which added support for Round robin scheduling has a bug due to which driver is not freeing transmit schedulers post class deletion. This patch fixes the same.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. [arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free]

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix NULL pointer dereference in gfs2_log_flush In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush lock to provide exclusion against gfs2_log_flush(). In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before dereferencing it. Otherwise, we could run into a NULL pointer dereference when outstanding glock work races with an unmount (glock_work_func -> run_queue -> do_xmote -> inode_go_sync -> gfs2_log_flush).

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: During vport delete send async logout explicitly During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete.

In the Linux kernel, the following vulnerability has been resolved: smb3: missing lock when picking channel Coverity spotted a place where we should have been holding the channel lock when accessing the ses channel index. Addresses-Coverity: 1582039 ("Data race condition (MISSING_LOCK)")

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't attempt to schedule hpd_work on headless cards If the card doesn't have display hardware, hpd_work and hpd_lock are left uninitialized which causes BUG when attempting to schedule hpd_work on runtime PM resume. Fix it by adding headless flag to DRM and skip any hpd if it's set.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA This dma_alloc_coherent() is undone neither in the remove function, nor in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix both issues.

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix possible cp null dereference cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug

In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: drm/arm/malidp: fix a possible null pointer dereference In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset.

In the Linux kernel, the following vulnerability has been resolved: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description]

In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable(). And thhere is not any protection when iterate over nf_tables_flowtables list in __nft_flowtable_type_get(). Therefore, there is pertential data-race of nf_tables_flowtables list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller nft_flowtable_type_get() to protect the entire type query process.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

In the Linux kernel, the following vulnerability has been resolved: net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine.

In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread);

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue.

In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited().

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: call request_irq() after NAPI initialized The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.