An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: Multimedia Console 2.1.2 ( 2023/05/04 ) and later Multimedia Console 1.4.8 ( 2023/05/05 ) and later QTS 5.1.0.2399 build 20230515 and later QTS 4.3.6.2441 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later Media Streaming add-on 500.1.1.2 ( 2023/06/12 ) and later Media Streaming add-on 500.0.0.11 ( 2023/06/16 ) and later

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

There are command injection vulnerabilities in the underlying Soft AP Daemon service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

network-manager through 1.0.2 allows remote attackers to execute arbitrary commands via the "execSync()" argument.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote unauthenticated attacker to execute an arbitrary OS command.

Blamer versions prior to 1.0.1 allows execution of arbitrary commands. It is possible to inject arbitrary commands as part of the arguments provided to blamer.

push-dir through 0.4.1 allows execution of arbritary commands. Arguments provided as part of the variable "opt.branch" is not validated before being provided to the "git" command within "index.js#L139". This could be abused by an attacker to inject arbitrary commands.

Zumtobel Netlink CCD Onboard 3.74 - Firmware 3.80 was discovered to contain a command injection vulnerability via the NetHostname parameter.

Thecus 4800Eco was discovered to contain a command injection vulnerability via the username parameter in /adm/setmain.php.

devcert-sanscache before 0.4.7 allows remote attackers to execute arbitrary code or cause a Command Injection via the exec function. The variable `commonName` controlled by user input is used as part of the `exec` function without any sanitization.

im-metadata through 3.0.1 allows remote attackers to execute arbitrary commands via the "exec" argument. It is possible to inject arbitrary commands as part of the metadata options which is given to the "exec" function.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

In aws-lambda versions prior to version 1.0.5, the "config.FunctioName" is used to construct the argument used within the "exec" function without any sanitization. It is possible for a user to inject arbitrary commands to the "zipCmd" used within "config.FunctionName".

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

All versions including 0.0.4 of lsof npm module are vulnerable to Command Injection. Every exported method used by the package uses the exec function to parse user input.

Grandstream GAC2500 1.0.3.35, GXP2200 1.0.3.27, GVC3202 1.0.3.51, GXV3275 before 1.0.3.219 Beta, and GXV3240 before 1.0.3.219 Beta devices allow unauthenticated remote code execution via shell metacharacters in a /manager?action=getlogcat priority field, in conjunction with a buffer overflow (via the phonecookie cookie) to overwrite a data structure and consequently bypass authentication. This can be exploited remotely or via CSRF because the cookie can be placed in an Accept HTTP header in an XMLHttpRequest call to lighttpd.

php-shellcommand versions before 1.6.1 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

In "index.js" file line 240, the run command executes the git command with a user controlled variable called remoteUrl. This affects git-diff-apply all versions prior to 0.22.2.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

All versions of curling.js are vulnerable to Command Injection via the run function. The command argument can be controlled by users without any sanitization.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

This affects all versions of package kill-process-by-name. If (attacker-controlled) user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization in the index.js file.

rpi through 0.0.3 allows execution of arbritary commands. The variable pinNumbver in function GPIO within src/lib/gpio.js is used as part of the arguement of exec function without any sanitization.

KLog Server through 2.4.1 allows authenticated command injection. async.php calls shell_exec() on the original value of the source parameter.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

Shell Metacharacter Injection in the package installer on Zyxel NAS 326 version 5.21 and below allows an authenticated attacker to execute arbitrary code via multiple different requests.

An issue in Infotel Conseil GLPI v.10.X.X and after allows a remote attacker to execute arbitrary code via the insufficient validation of user-supplied input.

SGE-PLC1000 device, in its 0.9.2b firmware version, does not handle some requests correctly, allowing a remote attacker to inject code into the operating system with maximum privileges.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

From Apache NiFi MiNiFi C++ version 0.5.0 the c2 protocol implements an "agent-update" command which was designed to patch the application binary. This "patching" command defaults to calling a trusted binary, but might be modified to an arbitrary value through a "c2-update" command. Said command is then executed using the same privileges as the application binary. This was addressed in version 0.10.0

Contao Managed Edition v1.5.0 was discovered to contain a remote command execution (RCE) vulnerability via the component php_cli parameter.

OS Command Injection vulnerability in es128 ssl-utils 1.0.0 for Node.js allows attackers to execute arbitrary commands via unsanitized shell metacharacters provided to the createCertRequest() and the createCert() functions.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A vulnerability was found in agentUniverse up to 0.0.18 and classified as critical. This issue affects the function StdioServerParameters of the component MCPSessionManager/MCPTool/MCPToolkit. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

OS Command injection vulnerability in Mintzo Docker-Tester through 1.2.1 allows attackers to execute arbitrary commands via shell metacharacters in the 'ports' entry of a crafted docker-compose.yml file.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

Liferay Portal 6.2.5 allows Command=FileUpload&Type=File&CurrentFolder=/ requests when frmfolders.html exists. NOTE: The vendor disputes this issue because the exploit reference link only shows frmfolders.html is accessible and does not demonstrate how an unauthorized user can upload a file.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to command injection, which may allow an attacker to remotely execute arbitrary code.

An issue in aliyundrive-webdav v.2.3.3 and before allows a remote attacker to execute arbitrary code via a crafted payload to the sid parameter in the action_query_qrcode component.

im-resize through 2.3.2 allows remote attackers to execute arbitrary commands via the "exec" argument. The cmd argument used within index.js, can be controlled by user without any sanitization.