A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.
A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Multiple Cisco products are affected by a vulnerability in Snort rules that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.The vulnerability is due to improper handling of the Block with Reset or Interactive Block with Reset actions if a rule is configured without proper constraints. An attacker could exploit this vulnerability by sending a crafted IP packet to the affected device. A successful exploit could allow the attacker to cause through traffic to be dropped. Note: Only products with Snort3 configured and either a rule with Block with Reset or Interactive Block with Reset actions configured are vulnerable. Products configured with Snort2 are not vulnerable.
A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.
A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM).
A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.
A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.
A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads.
A vulnerability in the Internet Key Exchange version 2 (IKEv2) protocol for VPN termination of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted IKEv2 traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a.
A vulnerability in the SSL VPN feature for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a logic error in memory management when the device is handling SSL VPN connections. An attacker could exploit this vulnerability by sending crafted SSL/TLS packets to the SSL VPN server of the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one.
A vulnerability in the VPN and management web servers of the Cisco Adaptive Security Virtual Appliance (ASAv) and Cisco Secure Firewall Threat Defense Virtual (FTDv), formerly Cisco Firepower Threat Defense Virtual, platforms could allow an unauthenticated, remote attacker to cause the virtual devices to run out of system memory, which could cause SSL VPN connection processing to slow down and eventually cease all together. This vulnerability is due to a lack of proper memory management for new incoming SSL/TLS connections on the virtual platforms. An attacker could exploit this vulnerability by sending a large number of new incoming SSL/TLS connections to the targeted virtual platform. A successful exploit could allow the attacker to deplete system memory, resulting in a denial of service (DoS) condition. The memory could be reclaimed slowly if the attack traffic is stopped, but a manual reload may be required to restore operations quickly.
A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.
A vulnerability in the SIP call processing function of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a crafted SIP message to an affected Cisco Unified CM or Cisco Unified CM SME device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition that interrupts the communications of reliant voice and video devices.
A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Internet Key Exchange Version 2 Mobility and Multihoming Protocol (MOBIKE) feature for the Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to the incorrect processing of certain MOBIKE packets. An attacker could exploit this vulnerability by sending crafted MOBIKE packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. The MOBIKE feature is supported only for IPv4 addresses.
A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.
A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for the Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error, which may prevent ingress buffers from being replenished under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to consume all input buffers, which are shared between all interfaces, leading to a queue wedge condition in all active interfaces. This situation would cause an affected device to stop processing any incoming traffic and result in a DoS condition until the device is reloaded manually.
A vulnerability in the software cryptography module of the Cisco Adaptive Security Virtual Appliance (ASAv) and Firepower 2100 Series running Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error with how the software cryptography module handles IPsec sessions. An attacker could exploit this vulnerability by creating and sending traffic in a high number of IPsec sessions through the targeted device. A successful exploit could cause the device to reload and result in a DoS condition.
A vulnerability in the processing of IP Service Level Agreement (SLA) packets by Cisco IOS Software and Cisco IOS XE software could allow an unauthenticated, remote attacker to cause an interface wedge and an eventual denial of service (DoS) condition on the affected device. The vulnerability is due to improper socket resources handling in the IP SLA responder application code. An attacker could exploit this vulnerability by sending crafted IP SLA packets to an affected device. An exploit could allow the attacker to cause an interface to become wedged, resulting in an eventual denial of service (DoS) condition on the affected device.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to an issue with allocating and freeing memory buffers in the network stack. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device in a sustained way. A successful exploit could cause the network stack of an affected device to run out of available buffers, impairing operations of control plane and management plane protocols, resulting in a DoS condition. Note: This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device. Nexus 1000V Switch for Microsoft Hyper-V is affected in versions prior to 5.2(1)SM3(2.1). Nexus 1000V Switch for VMware vSphere is affected in versions prior to 5.2(1)SV3(4.1a). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(6) and 9.2(2). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(11), 7.0(3)I7(6), and 9.2(2). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5) and 9.2(2). Nexus 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(5)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22. Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5) and 9.2(2). UCS 6200 and 6300 Series Fabric Interconnect are affected in versions prior to 3.2(3j) and 4.0(2a). UCS 6400 Series Fabric Interconnect are affected in versions prior to 4.0(2a).
A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the IP Service Level Agreements (IP SLA) responder and Two-Way Active Measurement Protocol (TWAMP) features of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause device packet memory to become exhausted or cause the IP SLA process to crash, resulting in a denial of service (DoS) condition. This vulnerability exists because socket creation failures are mishandled during the IP SLA and TWAMP processes. An attacker could exploit this vulnerability by sending specific IP SLA or TWAMP packets to an affected device. A successful exploit could allow the attacker to exhaust the packet memory, which will impact other processes, such as routing protocols, or crash the IP SLA process.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.
A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted.
A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload.
A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.
A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition.
A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.
A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.