In the HDF5 1.8.16 library's failure to check if the number of dimensions for an array read from the file is within the bounds of the space allocated for it, a heap-based buffer overflow will occur, potentially leading to arbitrary code execution.

The HDF5 1.8.16 library allocating space for the array using a value from the file has an impact within the loop for initializing said array allowing a value within the file to modify the loop's terminator. Due to this, an aggressor can cause the loop's index to point outside the bounds of the array when initializing it.

hdf5 v1.14.6 was discovered to contain a heap buffer overflow via the H5Z__filter_scaleoffset function.

hdf5 v1.14.6 was discovered to contain a heap buffer overflow via the H5VM_memcpyvv function.

An issue was discovered in HDF5 through 1.12.0. A heap-based buffer overflow exists in the function Decompress() located in decompress.c. It can be triggered by sending a crafted file to the gif2h5 binary. It allows an attacker to cause Denial of Service.

An out-of-bounds write vulnerability exists in the gif2h5 functionality of HDF5 Group libhdf5 1.10.4. A specially-crafted GIF file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

An issue was discovered in the HDF HDF5 1.10.3 library. There is a stack-based buffer overflow in the function H5S_extent_get_dims() in H5S.c. Specifically, this issue occurs while converting an HDF5 file to a GIF file.

A heap-based buffer overflow vulnerability exists in the gif2h5 functionality of HDF5 Group libhdf5 1.10.4. A specially-crafted GIF file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a memcpy parameter overlap in the function H5O_link_decode in H5Olink.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer overflow in the function H5G_ent_decode in H5Gent.c.

A vulnerability has been found in HDF5 1.14.6 and classified as critical. This vulnerability affects the function H5T__bit_copy of the component Type Conversion Logic. The manipulation leads to heap-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The vendor plans to fix this issue in an upcoming release.

Buffer Overflow vulnerability in function H5S_close in H5S.c in HDF5 1.10.4 allows remote attackers to run arbitrary code via creation of crafted file.

Buffer Overflow vulnerability in function H5S_close in H5S.c in HDF5 1.10.4 allows remote attackers to run arbitrary code via creation of crafted file.

A vulnerability, which was classified as critical, was found in HDF5 1.14.6. This affects the function H5Z__scaleoffset_decompress_one_byte of the component Scale-Offset Filter. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor plans to fix this issue in an upcoming release.

A vulnerability was found in HDF5 1.14.6 and classified as critical. This issue affects the function H5MM_strndup of the component Metadata Attribute Decoder. The manipulation leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor plans to fix this issue in an upcoming release.

A vulnerability, which was classified as critical, was found in HDF5 1.14.6. Affected is the function H5SM_delete of the file H5SM.c of the component h5 File Handler. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used.

A buffer overflow in H5O__layout_encode in H5Olayout.c in the HDF HDF5 through 1.10.4 library allows attackers to cause a denial of service via a crafted HDF5 file. This issue was triggered while repacking an HDF5 file, aka "Invalid write of size 2."

HDF5 through 1.14.3 contains a heap buffer overflow in H5A__attr_release_table, resulting in the corruption of the instruction pointer and causing denial of service or potential code execution.

HDF5 Library through 1.14.3 contains a heap-based buffer overflow in H5T__ref_mem_setnull in H5Tref.c (called from H5T__conv_ref in H5Tconv.c), resulting in the corruption of the instruction pointer.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x40 is overflowed with the call to sprintf() for any gateway values that are greater than 512-len(‘/etc/config-tools/config_default_gateway number=0 state=enabled value=‘) in length. A gateway value of length 0x7e2 will cause the service to crash.

PSKMAD.sys in Panda Free Antivirus 18.0 allows local users to cause a denial of service (BSoD) via a crafted DeviceIoControl request to \\.\PSMEMDriver.

libjxl b02d6b9, as used in libvips 8.11 through 8.11.2 and other products, has an out-of-bounds write in jxl::ModularFrameDecoder::DecodeGroup (called from jxl::FrameDecoder::ProcessACGroup and jxl::ThreadPool::RunCallState<jxl::FrameDecoder::ProcessSections).

GPAC 2.3-DEV-rev605-gfc9e29089-master contains a SEGV in gpac/MP4Box in gf_media_change_pl /afltest/gpac/src/media_tools/isom_tools.c:3293:42.

Stack-based buffer overflow in the vrend_decode_set_framebuffer_state function in vrend_decode.c in virglrenderer before 926b9b3460a48f6454d8bbe9e44313d86a65447f, as used in Quick Emulator (QEMU), allows a local guest users to cause a denial of service (application crash) via the "nr_cbufs" argument.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: Add bounds checking to mi_enum_attr() Added bounds checking to make sure that every attr don't stray beyond valid memory region.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). The destination buffer sp+0x440 is overflowed with the call to sprintf() for any domainname values that are greater than 1024-len(‘/etc/config-tools/edit_dns_server domain-name=‘) in length. A domainname value of length 0x3fa will cause the service to crash.

GPAC 2.3-DEV-rev605-gfc9e29089-master contains a SEGV in gpac/MP4Box in gf_isom_find_od_id_for_track /afltest/gpac/src/isomedia/media_odf.c:522:14.

A vulnerability was found in Performance Co-Pilot (PCP).  This flaw allows an attacker to send specially crafted data to the system, which could cause the program to misbehave or crash.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

Insufficient input validation during parsing of the System Management Mode (SMM) binary may allow a maliciously crafted SMM executable binary to corrupt Dynamic Root of Trust for Measurement (DRTM) user application memory that may result in a potential denial of service.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data stream corruption Maxim reported several issues when forcing a TCP transparent proxy to use the MPTCP protocol for the inbound connections. He also provided a clean reproducer. The problem boils down to 'mptcp_frag_can_collapse_to()' assuming that only MPTCP will use the given page_frag. If others - e.g. the plain TCP protocol - allocate page fragments, we can end-up re-using already allocated memory for mptcp_data_frag. Fix the issue ensuring that the to-be-expanded data fragment is located at the current page frag end. v1 -> v2: - added missing fixes tag (Mat)

In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x440 is overflowed with the call to sprintf() for any type values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled config-type=‘) in length. A type value of length 0x3d9 will cause the service to crash.

Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiVectorRender!StrokeText_Blend+0x00000000000003a7.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code.

GPAC 2.3-DEV-rev605-gfc9e29089-master contains a heap-buffer-overflow in ffdmx_parse_side_data /afltest/gpac/src/filters/ff_dmx.c:202:14 in gpac/MP4Box.

Improper buffer restrictions in Intel(R) Media SDK software all versions may allow an authenticated user to potentially enable denial of service via local access.

In /SM8250_Q_Master/android/vendor/oppo_charger/oppo/charger_ic/oppo_da9313.c, failure to check the parameter buf in the function proc_work_mode_write in proc_work_mode_write causes a vulnerability.

In PCRE 8.41, after compiling, a pcretest load test PoC produces a crash overflow in the function match() in pcre_exec.c because of a self-recursive call. NOTE: third parties dispute the relevance of this report, noting that there are options that can be used to limit the amount of stack that is used

Vim is an open source command line text editor. When performing a search and displaying the search-count message is disabled (:set shm+=S), the search pattern is displayed at the bottom of the screen in a buffer (msgbuf). When right-left mode (:set rl) is enabled, the search pattern is reversed. This happens by allocating a new buffer. If the search pattern contains some ASCII NUL characters, the buffer allocated will be smaller than the original allocated buffer (because for allocating the reversed buffer, the strlen() function is called, which only counts until it notices an ASCII NUL byte ) and thus the original length indicator is wrong. This causes an overflow when accessing characters inside the msgbuf by the previously (now wrong) length of the msgbuf. The issue has been fixed as of Vim patch v9.1.0689.

Buffer overflow in McAfee Data Loss Prevention (DLPe) for Windows 11.x prior to 11.3.2.8 allows local user to cause the Windows operating system to "blue screen" via a carefully constructed message sent to DLPe which bypasses DLPe internal checks and results in DLPe reading unallocated memory.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops.

An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in macOS Sonoma 14.6. An app may be able to cause a coprocessor crash.

Buffer Overflow vulnerability in Cesanta mJS 1.26 allows remote attackers to cause a denial of service via crafted .js file to mjs_set_errorf.

GPAC 2.3-DEV-rev605-gfc9e29089-master contains a heap-buffer-overflow in gf_isom_use_compact_size gpac/src/isomedia/isom_write.c:3403:3 in gpac/MP4Box.

Out-of-bounds array write in Xpdf 4.05 and earlier, triggered by long Unicode sequence in ActualText.