In Eclipse Mosquitto versions 2.07 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0.

Pexip Infinity before 26 allows remote denial of service because of missing H.264 input validation (issue 2 of 2).

Windows Secure Channel Denial of Service Vulnerability

In archive/zip in Go before 1.15.13 and 1.16.x before 1.16.5, a crafted file count (in an archive's header) can cause a NewReader or OpenReader panic.

In Messaging, there is a possible way to disable the messaging application due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

Improper Input Validation vulnerability in HTTP/2 of Apache Traffic Server allows an attacker to DOS the server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

Pexip Infinity 25.x before 25.4 has Improper Input Validation, and thus an unauthenticated remote attacker can cause a denial of service via the administrative web interface.

A flaw was found in Undertow package. Using the FormAuthenticationMechanism, a malicious user could trigger a Denial of Service by sending crafted requests, leading the server to an OutofMemory error, exhausting the server's memory.

Insufficient input validation in ASP may allow an attacker with a malicious BIOS to potentially cause a denial of service.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

Pexip Infinity before 26 allows remote denial of service because of missing RTMP input validation.

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below does not proper sanitize user input, allowing for an unauthenticated attacker to crash the controller software

An Improper Input Validation vulnerability in Packet Forwarding Engine manager (FXPC) process of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) by sending specific DHCPv6 packets to the device and crashing the FXPC service. Continued receipt and processing of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms in ACX Series: ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096 devices. Other ACX platforms are not affected from this issue. This issue affects Juniper Networks Junos OS on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096: 18.4 version 18.4R3-S7 and later versions prior to 18.4R3-S8. This issue does not affect: Juniper Networks Junos OS 18.4 versions prior to 18.4R3-S7 on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096.

Insufficient input validation of BIOS mailbox messages in SMU may result in out-of-bounds memory reads potentially resulting in a denial of service.

FastDDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Prior to versions 2.14.1, 2.13.5, 2.10.4, and 2.6.8, when a publisher serves a malformed `RTPS` packet, the subscriber crashes when creating `pthread`. This can remotely crash any Fast-DDS process, potentially leading to a DOS attack. Versions 2.14.1, 2.13.5, 2.10.4, and 2.6.8 contain a patch for the issue.

A denial of service vulnerability was reported in some Lenovo Printers that could allow an attacker to cause the device to crash by sending crafted LPD packets.

In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.

Possible buffer overflow due to Improper validation of received CF-ACK and CF-Poll data frames in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker cause DOS through improper input.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for an ICO container, and thus an attempted memory allocation can be very large.

Pillow before 8.1.2 allows attackers to cause a denial of service (memory consumption) because the reported size of a contained image is not properly checked for a BLP container, and thus an attempted memory allocation can be very large.

When incoming DNS over HTTPS support is enabled using the nghttp2 provider, and queries are routed to a tcp-only or DNS over TLS backend, an attacker can trigger an assertion failure in DNSdist by sending a request for a zone transfer (AXFR or IXFR) over DNS over HTTPS, causing the process to stop and thus leading to a Denial of Service. DNS over HTTPS is not enabled by default, and backends are using plain DNS (Do53) by default.

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

An issue was discovered on FiberHome HG6245D devices through RP2613. It is possible to crash the telnet daemon by sending a certain 0a 65 6e 61 62 6c 65 0a 02 0a 1a 0a string.

Pexip Infinity before 31.2 has Improper Input Validation for RTCP, allowing remote attackers to trigger an abort.

Oryx Embedded CycloneTCP 1.7.6 to 2.0.0, fixed in 2.0.2, is affected by incorrect input validation, which may cause a denial of service (DoS). To exploit the vulnerability, an attacker needs to have TCP connectivity to the target system. Receiving a maliciously crafted TCP packet from an unauthenticated endpoint is sufficient to trigger the bug.

Running DDoS on tcp port 22 will trigger a kernel crash. This issue is introduced by the backport of a commit regarding nft_lookup without the subsequent fixes that were introduced after this commit. The resolution of this CVE introduces those commits to the linux-bluefield package.

An issue was discovered in Joomla! 2.5.0 through 3.9.27. Missing validation of input could lead to a broken usergroups table.

An input validation vulnerability exists in the Rockwell Automation 5015-AENFTXT that causes the secondary adapter to result in a major nonrecoverable fault (MNRF) when malicious input is entered. If exploited, the availability of the device will be impacted, and a manual restart is required. Additionally, a malformed PTP packet is needed to exploit this vulnerability.

Improper Input Validation in Hitron Systems DVR LGUVR-16H 1.02~4.02 allows an attacker to cause network attack in case of using defalut admin ID/PW.

A denial-of-service vulnerability exists in the Rockwell Automation PowerFlex® 527 due to improper traffic throttling in the device. If multiple data packets are sent to the device repeatedly the device will crash and require a manual restart to recover.

The Stars Rating WordPress plugin before 3.5.1 does not validate the submitted rating, allowing submission of long integer, causing a Denial of Service in the comments section, or pending comment dashboard depending if the user sent it as unauthenticated or authenticated.

A lack of replay attack protection in Security Mode Command process prior to SMR Oct-2021 Release 1 can lead to denial of service on mobile network connection and battery depletion.

Improper Input Validation in Hitron Systems DVR HVR-8781 1.03~4.02 allows an attacker to cause network attack in case of using defalut admin ID/PW.

Improper Input Validation in Hitron Systems DVR LGUVR-4H 1.02~4.02 allows an attacker to cause network attack in case of using defalut admin ID/PW.

All versions of Node.js 9.x and 10.x are vulnerable and the severity is HIGH. An attacker can cause a denial of service (DoS) by causing a node process which provides an http server supporting TLS server to crash. This can be accomplished by sending duplicate/unexpected messages during the handshake. This vulnerability has been addressed by updating the TLS implementation.

A Malformed h2 frame can cause 'std::out_of_range' exception when parsing priority meta data. This behavior can lead to denial-of-service. This affects all supported versions of HHVM (3.25.2, 3.24.6, and 3.21.10 and below) when using the proxygen server to handle HTTP2 requests.

Improper Input Validation in Hitron Systems DVR HVR-4781 1.03~4.02 allows an attacker to cause network attack in case of using defalut admin ID/PW.

Proxygen fails to validate that a secondary auth manager is set before dereferencing it. That can cause a denial of service issue when parsing a Certificate/CertificateRequest HTTP2 Frame over a fizz (TLS 1.3) transport. This issue affects Proxygen releases starting from v2018.10.29.00 until the fix in v2018.11.19.00.

Transient DOS while decoding an ASN.1 OER message containing a SEQUENCE of unknown extensions.

A malformed discovery packet sent by a malicious actor with preexisting access to the network could interrupt the functionality of device management and discovery. Affected Products: UniFi Access Points UniFi Switches UniFi LTE Backup UniFi Express (Only Mesh Mode, Router mode is not affected) Mitigation: Update UniFi Access Points to Version 6.6.55 or later. Update UniFi Switches to Version 6.6.61 or later. Update UniFi LTE Backup to Version 6.6.57 or later. Update UniFi Express to Version 3.2.5 or later.

Transient DOS while decoding message of size that exceeds the available system memory.

.NET Framework Denial of Service Vulnerability

CWE-20: Improper Input Validation vulnerability exists that could cause a Denial Of Service when specific crafted FTP command is sent to the device.

Yandex Browser Lite for Android prior to version 21.1.0 allows remote attackers to cause a denial of service.

An exploitable denial-of-service vulnerability exists in the URI-parsing functionality of the TP-Link TL-R600VPN HTTP server. A specially crafted URL can cause the server to stop responding to requests, resulting in downtime for the management portal. An attacker can send either an unauthenticated or authenticated web request to trigger this vulnerability.

A denial-of-service vulnerability exists in the Pixar Renderman IT Display Service 21.6 (0x67). The vulnerability is present in the parsing of a network packet without proper validation of the packet. The data read by the application is not validated, and its use can lead to a null pointer dereference. The IT application is opened by a user and then listens for a connection on port 4001. An attacker can deliver an attack once the application has been opened.

On BIG-IP Advanced WAF and BIG-IP ASM version 16.x before 16.1.0x, 15.1.x before 15.1.3.1, 14.1.x before 14.1.4.3, 13.1.x before 13.1.4.1, and all versions of 12.1.x, when a WebSocket profile is configured on a virtual server, undisclosed requests can cause bd to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

There is an Input Verification Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause the system to reset.