In the Linux kernel, the following vulnerability has been resolved: ipv6: reject malicious packets in ipv6_gso_segment() syzbot was able to craft a packet with very long IPv6 extension headers leading to an overflow of skb->transport_header. This 16bit field has a limited range. Add skb_reset_transport_header_careful() helper and use it from ipv6_gso_segment() WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline] WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Modules linked in: CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline] RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Call Trace: <TASK> skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110 skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 __skb_gso_segment+0x342/0x510 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950 validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000 sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329 __dev_xmit_skb net/core/dev.c:4102 [inline] __dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit 773426f4771b ("crypto: arm/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix double free in idxd_setup_wqs() The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif.

In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Double-free fix When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails.

In the Linux kernel, the following vulnerability has been resolved: comedi: Make insn_rw_emulate_bits() do insn->n samples The `insn_rw_emulate_bits()` function is used as a default handler for `INSN_READ` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default handler for `INSN_WRITE` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the `INSN_READ` or `INSN_WRITE` instruction handling with a constructed `INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE` instructions are supposed to be able read or write multiple samples, indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently only handles a single sample. For `INSN_READ`, the comedi core will copy `insn->n` samples back to user-space. (That triggered KASAN kernel-infoleak errors when `insn->n` was greater than 1, but that is being fixed more generally elsewhere in the comedi core.) Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return an error, to conform to the general expectation for `INSN_READ` and `INSN_WRITE` handlers.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt Stanislav reported that in bpf_crypto_crypt() the destination dynptr's size is not validated to be at least as large as the source dynptr's size before calling into the crypto backend with 'len = src_len'. This can result in an OOB write when the destination is smaller than the source. Concretely, in mentioned function, psrc and pdst are both linear buffers fetched from each dynptr: psrc = __bpf_dynptr_data(src, src_len); [...] pdst = __bpf_dynptr_data_rw(dst, dst_len); [...] err = decrypt ? ctx->type->decrypt(ctx->tfm, psrc, pdst, src_len, piv) : ctx->type->encrypt(ctx->tfm, psrc, pdst, src_len, piv); The crypto backend expects pdst to be large enough with a src_len length that can be written. Add an additional src_len > dst_len check and bail out if it's the case. Note that these kfuncs are accessible under root privileges only.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix vmalloc out-of-bounds write in fast_imageblit This issue triggers when a userspace program does an ioctl FBIOPUT_CON2FBMAP by passing console number and frame buffer number. Ideally this maps console to frame buffer and updates the screen if console is visible. As part of mapping it has to do resize of console according to frame buffer info. if this resize fails and returns from vc_do_resize() and continues further. At this point console and new frame buffer are mapped and sets display vars. Despite failure still it continue to proceed updating the screen at later stages where vc_data is related to previous frame buffer and frame buffer info and display vars are mapped to new frame buffer and eventully leading to out-of-bounds write in fast_imageblit(). This bheviour is excepted only when fg_console is equal to requested console which is a visible console and updates screen with invalid struct references in fbcon_putcs().

In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix potential buffer overflow in setup_clusters() In setup_swap_map(), we only ensure badpages are in range (0, last_page]. As maxpages might be < last_page, setup_clusters() will encounter a buffer overflow when a badpage is >= maxpages. Only call inc_cluster_info_page() for badpage which is < maxpages to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write.

In the Linux kernel, the following vulnerability has been resolved: fbdev: fix potential buffer overflow in do_register_framebuffer() The current implementation may lead to buffer overflow when: 1. Unregistration creates NULL gaps in registered_fb[] 2. All array slots become occupied despite num_registered_fb < FB_MAX 3. The registration loop exceeds array bounds Add boundary check to prevent registered_fb[FB_MAX] access.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio()

In the Linux kernel, the following vulnerability has been resolved: wifi: prevent A-MSDU attacks in mesh networks This patch is a mitigation to prevent the A-MSDU spoofing vulnerability for mesh networks. The initial update to the IEEE 802.11 standard, in response to the FragAttacks, missed this case (CVE-2025-27558). It can be considered a variant of CVE-2020-24588 but for mesh networks. This patch tries to detect if a standard MSDU was turned into an A-MSDU by an adversary. This is done by parsing a received A-MSDU as a standard MSDU, calculating the length of the Mesh Control header, and seeing if the 6 bytes after this header equal the start of an rfc1042 header. If equal, this is a strong indication of an ongoing attack attempt. This defense was tested with mac80211_hwsim against a mesh network that uses an empty Mesh Address Extension field, i.e., when four addresses are used, and when using a 12-byte Mesh Address Extension field, i.e., when six addresses are used. Functionality of normal MSDUs and A-MSDUs was also tested, and confirmed working, when using both an empty and 12-byte Mesh Address Extension field. It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh networks keep being detected and prevented. Note that the vulnerability being patched, and the defense being implemented, was also discussed in the following paper and in the following IEEE 802.11 presentation: https://papers.mathyvanhoef.com/wisec2025.pdf https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx

In the Linux kernel, the following vulnerability has been resolved: erofs: fix runtime warning on truncate_folio_batch_exceptionals() Commit 0e2f80afcfa6("fs/dax: ensure all pages are idle prior to filesystem unmount") introduced the WARN_ON_ONCE to capture whether the filesystem has removed all DAX entries or not and applied the fix to xfs and ext4. Apply the missed fix on erofs to fix the runtime warning: [ 5.266254] ------------[ cut here ]------------ [ 5.266274] WARNING: CPU: 6 PID: 3109 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xff/0x260 [ 5.266294] Modules linked in: [ 5.266999] CPU: 6 UID: 0 PID: 3109 Comm: umount Tainted: G S 6.16.0+ #6 PREEMPT(voluntary) [ 5.267012] Tainted: [S]=CPU_OUT_OF_SPEC [ 5.267017] Hardware name: Dell Inc. OptiPlex 5000/05WXFV, BIOS 1.5.1 08/24/2022 [ 5.267024] RIP: 0010:truncate_folio_batch_exceptionals+0xff/0x260 [ 5.267076] Code: 00 00 41 39 df 7f 11 eb 78 83 c3 01 49 83 c4 08 41 39 df 74 6c 48 63 f3 48 83 fe 1f 0f 83 3c 01 00 00 43 f6 44 26 08 01 74 df <0f> 0b 4a 8b 34 22 4c 89 ef 48 89 55 90 e8 ff 54 1f 00 48 8b 55 90 [ 5.267083] RSP: 0018:ffffc900013f36c8 EFLAGS: 00010202 [ 5.267095] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 5.267101] RDX: ffffc900013f3790 RSI: 0000000000000000 RDI: ffff8882a1407898 [ 5.267108] RBP: ffffc900013f3740 R08: 0000000000000000 R09: 0000000000000000 [ 5.267113] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 5.267119] R13: ffff8882a1407ab8 R14: ffffc900013f3888 R15: 0000000000000001 [ 5.267125] FS: 00007aaa8b437800(0000) GS:ffff88850025b000(0000) knlGS:0000000000000000 [ 5.267132] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.267138] CR2: 00007aaa8b3aac10 CR3: 000000024f764000 CR4: 0000000000f52ef0 [ 5.267144] PKRU: 55555554 [ 5.267150] Call Trace: [ 5.267154] <TASK> [ 5.267181] truncate_inode_pages_range+0x118/0x5e0 [ 5.267193] ? save_trace+0x54/0x390 [ 5.267296] truncate_inode_pages_final+0x43/0x60 [ 5.267309] evict+0x2a4/0x2c0 [ 5.267339] dispose_list+0x39/0x80 [ 5.267352] evict_inodes+0x150/0x1b0 [ 5.267376] generic_shutdown_super+0x41/0x180 [ 5.267390] kill_block_super+0x1b/0x50 [ 5.267402] erofs_kill_sb+0x81/0x90 [erofs] [ 5.267436] deactivate_locked_super+0x32/0xb0 [ 5.267450] deactivate_super+0x46/0x60 [ 5.267460] cleanup_mnt+0xc3/0x170 [ 5.267475] __cleanup_mnt+0x12/0x20 [ 5.267485] task_work_run+0x5d/0xb0 [ 5.267499] exit_to_user_mode_loop+0x144/0x170 [ 5.267512] do_syscall_64+0x2b9/0x7c0 [ 5.267523] ? __lock_acquire+0x665/0x2ce0 [ 5.267535] ? __lock_acquire+0x665/0x2ce0 [ 5.267560] ? lock_acquire+0xcd/0x300 [ 5.267573] ? find_held_lock+0x31/0x90 [ 5.267582] ? mntput_no_expire+0x97/0x4e0 [ 5.267606] ? mntput_no_expire+0xa1/0x4e0 [ 5.267625] ? mntput+0x24/0x50 [ 5.267634] ? path_put+0x1e/0x30 [ 5.267647] ? do_faccessat+0x120/0x2f0 [ 5.267677] ? do_syscall_64+0x1a2/0x7c0 [ 5.267686] ? from_kgid_munged+0x17/0x30 [ 5.267703] ? from_kuid_munged+0x13/0x30 [ 5.267711] ? __do_sys_getuid+0x3d/0x50 [ 5.267724] ? do_syscall_64+0x1a2/0x7c0 [ 5.267732] ? irqentry_exit+0x77/0xb0 [ 5.267743] ? clear_bhb_loop+0x30/0x80 [ 5.267752] ? clear_bhb_loop+0x30/0x80 [ 5.267765] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 5.267772] RIP: 0033:0x7aaa8b32a9fb [ 5.267781] Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 e9 83 0d 00 f7 d8 [ 5.267787] RSP: 002b:00007ffd7c4c9468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 5.267796] RAX: 0000000000000000 RBX: 00005a61592a8b00 RCX: 00007aaa8b32a9fb [ 5.267802] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005a61592b2080 [ 5.267806] RBP: 00007ffd7c4c9540 R08: 00007aaa8b403b20 R09: 0000000000000020 [ 5.267812] R10: 0000000000000001 R11: 0000000000000246 R12: 00005a61592a8c00 [ 5.267817] R13: 00000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: libwx: remove duplicate page_pool_put_full_page() page_pool_put_full_page() should only be invoked when freeing Rx buffers or building a skb if the size is too short. At other times, the pages need to be reused. So remove the redundant page put. In the original code, double free pages cause kernel panic: [ 876.949834] __irq_exit_rcu+0xc7/0x130 [ 876.949836] common_interrupt+0xb8/0xd0 [ 876.949838] </IRQ> [ 876.949838] <TASK> [ 876.949840] asm_common_interrupt+0x22/0x40 [ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246 [ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000 [ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e [ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed [ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580 [ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000 [ 876.949852] ? cpuidle_enter_state+0xb3/0x420 [ 876.949855] cpuidle_enter+0x29/0x40 [ 876.949857] cpuidle_idle_call+0xfd/0x170 [ 876.949859] do_idle+0x7a/0xc0 [ 876.949861] cpu_startup_entry+0x25/0x30 [ 876.949862] start_secondary+0x117/0x140 [ 876.949864] common_startup_64+0x13e/0x148 [ 876.949867] </TASK> [ 876.949868] ---[ end trace 0000000000000000 ]--- [ 876.949869] ------------[ cut here ]------------ [ 876.949870] list_del corruption, ffffead40445a348->next is NULL [ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120 [ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E) [ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi [ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary) [ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120 [ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8 [ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282 [ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000 [ 876.949942] RDX: 0000000000000105 RSI: 00000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix double SIGFPE crash Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately. When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace. The issue can be reproduced with this test program: root@parisc:~# cat fpe.c static void fpe_func(int sig, siginfo_t *i, void *v) { sigset_t set; sigemptyset(&set); sigaddset(&set, SIGFPE); sigprocmask(SIG_UNBLOCK, &set, NULL); printf("GOT signal %d with si_code %ld\n", sig, i->si_code); } int main() { struct sigaction action = { .sa_sigaction = fpe_func, .sa_flags = SA_RESTART|SA_SIGINFO }; sigaction(SIGFPE, &action, 0); feenableexcept(FE_OVERFLOW); return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308); } root@parisc:~# gcc fpe.c -lm root@parisc:~# ./a.out Floating point exception root@parisc:~# strace -f ./a.out execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 ... rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} --- --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} --- +++ killed by SIGFPE +++ Floating point exception

In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac.

In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely.

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix smp_processor_id() call trace for preemptible kernels Correct kernel call trace when calling smp_processor_id() when called in preemptible kernels by using raw_smp_processor_id(). smp_processor_id() checks to see if preemption is disabled and if not, issue an error message followed by a call to dump_stack(). Brief example of call trace: kernel: check_preemption_disabled: 436 callbacks suppressed kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u1025:0/2354 kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0 kernel: ... kernel: Workqueue: writeback wb_workfn (flush-253:0) kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x34/0x48 kernel: check_preemption_disabled+0xdd/0xe0 kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: ...

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34

In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix clobbered r15 during livepatching While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is not restored in livepatch sequence leading to not so obvious fails like below: BUG: Unable to handle kernel data access on write at 0xc0000000000f9078 Faulting instruction address: 0xc0000000018ff958 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790 REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000 CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1 GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488 GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000 GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070 GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88 GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000 GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078 ... Call Trace: check_heap_object+0x34/0x390 (unreliable) __mutex_unlock_slowpath.isra.0+0xe4/0x230 seq_read_iter+0x430/0xa90 proc_reg_read_iter+0xa4/0x200 vfs_read+0x41c/0x510 ksys_read+0xa4/0x190 system_call_exception+0x1d0/0x440 system_call_vectored_common+0x15c/0x2ec Fix it by restoring r15 always.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4851: fix ad4858 chan pointer handling The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly.

In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = ffz(~msblk->devblksize); ---- sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0. As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2 is set to 64. This subsequently causes the UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') This commit adds a check for a 0 return by sb_min_blocksize().

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations.

In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Fix potential memory corruption in ipmi_create_user() The "intf" list iterator is an invalid pointer if the correct "intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on and invalid pointer will lead to memory corruption. We don't really need to call atomic_dec() if we haven't called atomic_add_return() so update the if (intf->in_shutdown) path as well.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)

In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).

In the Linux kernel, the following vulnerability has been resolved: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix double-free bug The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd_vfs_stream_write() did not validate whether the write offset (*pos) was within the bounds of the existing stream data length (v_len). If *pos was greater than or equal to v_len, this could lead to an out-of-bounds memory write. This patch adds a check to ensure *pos is less than v_len before proceeding. If the condition fails, -EINVAL is returned.

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix potential out-of-bound write If the caller wrote more characters, count is truncated to the max available space in "simple_write_to_buffer". Check that the input size does not exceed the buffer size. Write a zero termination afterwards.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops Fix a kernel oops found while testing the stm32_pcie Endpoint driver with handling of PERST# deassertion: During EP initialization, pci_epf_test_alloc_space() allocates all BARs, which are further freed if epc_set_bar() fails (for instance, due to no free inbound window). However, when pci_epc_set_bar() fails, the error path: pci_epc_set_bar() -> pci_epf_free_space() does not clear the previous assignment to epf_test->reg[bar]. Then, if the host reboots, the PERST# deassertion restarts the BAR allocation sequence with the same allocation failure (no free inbound window), creating a double free situation since epf_test->reg[bar] was deallocated and is still non-NULL. Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space() invocations are symmetric, and as such, set epf_test->reg[bar] to NULL when memory is freed. [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix a buf size overflow issue during udmabuf creation by casting size_limit_mb to u64 when calculate pglimit.

In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue().

A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat.

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - fix double free in hash_accept If accept(2) is called on socket type algif_hash with MSG_MORE flag set and crypto_ahash_import fails, sk2 is freed. However, it is also freed in af_alg_release, leading to slab-use-after-free error.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Restore context entry setup order for aliased devices Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order.

In the Linux kernel, the following vulnerability has been resolved: perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create() The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix double free in delayed_free The double free could happen in the following path. exfat_create_upcase_table() exfat_create_upcase_table() : return error exfat_free_upcase_table() : free ->vol_utbl exfat_load_default_upcase_table : return error exfat_kill_sb() delayed_free() exfat_free_upcase_table() <--------- double free This patch set ->vol_util as NULL after freeing it.

In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.

In the Linux kernel, the following vulnerability has been resolved: crypto: lzo - Fix compression buffer overrun Unlike the decompression code, the compression code in LZO never checked for output overruns. It instead assumes that the caller always provides enough buffer space, disregarding the buffer length provided by the caller. Add a safe compression interface that checks for the end of buffer before each write. Use the safe interface in crypto/lzo.

In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.