A vulnerability has been found in D-Link DAP-1620 1.03 and classified as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DAP-1620 1.03. This affects the function check_dws_cookie of the file /storage of the component Cookie Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been declared as critical. This vulnerability affects the function ctxz_asp of the file /ctxz.asp of the component Connection Limit Page. The manipulation of the argument def/defTcp/defUdp/defIcmp/defOther leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DAP-1620 1.03 and classified as critical. This issue affects the function check_dws_cookie of the file /storage. The manipulation of the argument uid leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1562 1.10. Affected by this issue is the function http_request_parse of the component HTTP Header Handler. The manipulation of the argument Authorization leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

Jenkins WMI Windows Agents Plugin 1.8 and earlier includes the Windows Remote Command library which has a buffer overflow vulnerability that may allow users able to connect to a named pipe to execute commands on the Windows agent machine.

A buffer overflow in the httpd daemon on TP-Link TL-WR841N V12 (firmware version 3.16.9) devices allows an authenticated remote attacker to execute arbitrary code via a GET request to the page for the System Tools of the Wi-Fi network. This affects TL-WR841 V12 TL-WR841N(EU)_V12_160624 and TL-WR841 V11 TL-WR841N(EU)_V11_160325 , TL-WR841N_V11_150616 and TL-WR841 V10 TL-WR841N_V10_150310 are also affected.

A vulnerability was found in Tenda FH1206 1.2.0.8(8155) and classified as critical. This issue affects the function fromAddressNat of the file /goform/addressNat. The manipulation of the argument entrys leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261671. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A stack buffer overflow vulnerability has been discovered in Microsoft Skype 7.2, 7.35, and 7.36 before 7.37, involving MSFTEDIT.DLL mishandling of remote RDP clipboard content within the message box.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "URL" parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments" and passes a "pointer" to the function where it will be allowed to store the value from the URL parameter. This pointer is passed as the second parameter $a2 to the function "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". However, neither the callee or the caller in this case performs a simple length check and as a result an attacker who is able to send more than 1336 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

A vulnerability was determined in Tenda CH22 1.0.0.1. Affected by this issue is the function fromIpsecitem of the file /goform/IPSECsave of the component httpd. Executing manipulation of the argument ipsecno can lead to stack-based buffer overflow. The attack may be performed from remote.

Buffer overflow in Microsoft SQL Server 2005 SP1 and SP2, and 2005 Express Edition SP1 and SP2, allows remote authenticated users to execute arbitrary code via a crafted insert statement.

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a buffer overflow in the handling of the `INDEX` of `NET-SNMP-VACM-MIB` can cause an out-of-bounds memory access. A user with read-only credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range.

Buffer overflow in OpenBase 10.0.5 and earlier might allow remote authenticated users to execute arbitrary code or cause a denial of service (daemon crash) by creating a stored procedure with a long name and invoking this procedure, which triggers heap corruption.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A heap overflow vulnerability in Citrix NetScaler Gateway versions 10.1 before 135.8/135.12, 10.5 before 65.11, 11.0 before 70.12, and 11.1 before 52.13 allows a remote authenticated attacker to run arbitrary commands via unspecified vectors.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

spice versions though 0.13 are vulnerable to out-of-bounds memory access when processing specially crafted messages from authenticated attacker to the spice server resulting into crash and/or server memory leak.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chan_sip, the CDR dialplan function, and the AMI Monitor action.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

The affected product is vulnerable to five post-authentication buffer overflows, which may allow a logged in user to remotely execute arbitrary code on the IP150 (firmware versions 5.02.09).

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

A stack buffer overflow flaw was found in the Quick Emulator (QEMU) before 2.9 built with the Network Block Device (NBD) client support. The flaw could occur while processing server's response to a 'NBD_OPT_LIST' request. A malicious NBD server could use this issue to crash a remote NBD client resulting in DoS or potentially execute arbitrary code on client host with privileges of the QEMU process.

Buffer overflow in WG-C10 v3.0.79 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

Stack-based buffer overflow in Oracle 9i and 10g allows remote attackers to execute arbitrary code via a long token in the text of a wrapped procedure.

Buffer overflow in the glob implementation (glob.c) in libc in NetBSD-current before 20050914, NetBSD 2.* and 3.* before 20061203, and Apple Mac OS X before 2007-004, as used by the FTP daemon and tnftpd, allows remote authenticated users to execute arbitrary code via a long pathname that results from path expansion.

Buffer overflow in IMAP service in MDaemon 6.7.5 and earlier allows remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a CREATE command with a long mailbox name.

Stack-based buffer overflow in the eap_do_notify function in eap.c in xsupplicant before 1.2.6, and possibly other versions, allows remote authenticated users to execute arbitrary code via unspecified vectors.

A buffer overflow vulnerability in the PAN-OS management web interface allows authenticated administrators to disrupt system processes and potentially execute arbitrary code with root privileges. This issue impacts only PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

An issue was discovered in net/ceph/messenger_v2.c in the Linux kernel before 6.4.5. There is an integer signedness error, leading to a buffer overflow and remote code execution via HELLO or one of the AUTH frames. This occurs because of an untrusted length taken from a TCP packet in ceph_decode_32.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. At 0x9d01ef24 the value for the s_offset key is copied using strcpy to the buffer at $sp+0x2b0. This buffer is 32 bytes large, sending anything longer will cause a buffer overflow.

Buffer overflow in logout.cgi in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allows remote authenticated users to execute arbitrary code via the SID parameter.

ProFTPD 1.2.7 through 1.2.9rc2 does not properly translate newline characters when transferring files in ASCII mode, which allows remote attackers to execute arbitrary code via a buffer overflow using certain files.

Multiple buffer overflows in Oracle 9i Database release 2, Release 1, 8i, 8.1.7, and 8.0.6 allow remote attackers to execute arbitrary code via (1) a long conversion string argument to the TO_TIMESTAMP_TZ function, (2) a long time zone argument to the TZ_OFFSET function, or (3) a long DIRECTORY parameter to the BFILENAME function.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the PubNub message handler for the "control" channel of Insteon Hub running firmware version 1012. Specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. A strcpy overflows the buffer insteon_pubnub.channel_cc_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "c_r" parameter in order to exploit this vulnerability. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability.

Multiple buffer overflows in (a) UltraVNC (aka Ultr@VNC) 1.0.1 and earlier and (b) tabbed_viewer 1.29 (1) allow user-assisted remote attackers to execute arbitrary code via a malicious server that sends a long string to a client that connects on TCP port 5900, which triggers an overflow in Log::ReallyPrint; and (2) allow remote attackers to cause a denial of service (server crash) via a long HTTP GET request to TCP port 5800, which triggers an overflow in VNCLog::ReallyPrint.

Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.

VMware ESXi (6.0 before ESXi600-201711101-SG, 5.5 ESXi550-201709101-SG), Workstation (12.x before 12.5.8), and Fusion (8.x before 8.5.9) contain a vulnerability that could allow an authenticated VNC session to cause a stack overflow via a specific set of VNC packets. Successful exploitation of this issue could result in remote code execution in a virtual machine via the authenticated VNC session. Note: In order for exploitation to be possible in ESXi, VNC must be manually enabled in a virtual machine's .vmx configuration file. In addition, ESXi must be configured to allow VNC traffic through the built-in firewall.

In the Linux kernel, the following vulnerability has been resolved: wl1251: Fix possible buffer overflow in wl1251_cmd_scan Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size.