Openshift has shell command injection flaws due to unsanitized data being passed into shell commands.

An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life.

Dolibarr before 17.0.1 allows remote code execution by an authenticated user via an uppercase manipulation: <?PHP instead of <?php in injected data.

Nagios XI versions prior to 2012R1.6 contain a shell command injection vulnerability in the Auto-Discovery tool. User-controlled input is passed to a shell without adequate sanitation or argument quoting, allowing an authenticated user with access to discovery functionality to execute arbitrary commands with the privileges of the application service.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Panasonic AiSEG2 versions 2.80F through 2.93A allows remote attackers to execute arbitrary OS commands.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

An OS Command Injection vulnerability in gRPC Network Operations Interface (gNOI) server module of Juniper Networks Junos OS Evolved allows an authenticated, low privileged, network based attacker to inject shell commands and execute code. This issue affects Juniper Networks Junos OS Evolved 21.4 version 21.4R1-EVO and later versions prior to 22.1R1-EVO.

pfSense through 2.3.4 through 2.4.4-p3 allows Remote Code Injection via a methodCall XML document with a pfsense.exec_php call containing shell metacharacters in a parameter value.

Beekeeper Studio versions prior to 3.9.9 allows a remote authenticated attacker to execute arbitrary JavaScript code with the privilege of the application on the PC where the affected product is installed. As a result, an arbitrary OS command may be executed as well.

ASUS RT-AC86U does not filter special characters for parameters in specific web URLs. A remote attacker with normal user privileges can exploit this vulnerability to perform command injection attack to execute arbitrary system commands, disrupt system or terminate service.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

pymedusa is an automatic video library manager for TV Shows. In versions prior 1.0.12 an attacker with access to the web interface can update the git executable path in /config/general/ > advanced settings with arbitrary OS commands. An attacker may exploit this vulnerability to take execute arbitrary OS commands as the user running the pymedusa program. Users are advised to upgrade. There are no known workarounds for this vulnerability.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

When DNS is provisioned, an authenticated remote command execution vulnerability exists in DNS iQuery mesh. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A component for parsing OXMF templates could be abused to execute arbitrary system commands that would be executed as the non-privileged runtime user. Users and attackers could run system commands with limited privilege to gain unauthorized access to confidential information and potentially violate integrity by modifying resources. The template engine has been reconfigured to deny execution of harmful commands on a system level. No publicly available exploits are known.

Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote authenticated users to execute arbitrary commands as demonstrated by a ; (semicolon) to the ping command feature.

OS command injection vulnerability in the mail setting page of SolarView Compact SV-CPT-MC310 versions prior to Ver.8.10 and SV-CPT-MC310F versions prior to Ver.8.10 allows remote authenticated attackers to execute an arbitrary OS command.

OS command injection vulnerability in the download page of SolarView Compact SV-CPT-MC310 versions prior to Ver.8.10 and SV-CPT-MC310F versions prior to Ver.8.10 allows a remote authenticated attacker to execute an arbitrary OS command.

SeowonIntech SWC 5100W WIMAX Bootloader 1.18.19.0, HW 0.0.7.0, and FW 1.11.0.1, 1.9.9.4 are vulnerable to OS Command Injection. which allows attackers to take over the system with root privilege by abusing doSystem() function.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to search.crud.php because the catCommand parameter is passed to the exec function without filtering, which can lead to command execution.

minPlayCommand.php in Centreon Web before 2.8.27 allows authenticated attackers to execute arbitrary code via the command_hostaddress parameter. NOTE: some sources have listed CVE-2019-17017 for this, but that is incorrect.

In Tiny File Manager before 2.3.9, there is a remote code execution via Upload from URL and Edit/Rename files. Only authenticated users are impacted.

An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

OS command injection vulnerability in CONPROSYS IoT Gateway products allows a remote authenticated attacker who can access Network Maintenance page to execute arbitrary OS commands with a root privilege. The affected products and versions are as follows: M2M Gateway with the firmware Ver.3.7.10 and earlier (CPS-MG341-ADSC1-111, CPS-MG341-ADSC1-931, CPS-MG341G-ADSC1-111, CPS-MG341G-ADSC1-930, and CPS-MG341G5-ADSC1-931), M2M Controller Integrated Type with firmware Ver.3.7.6 and earlier versions (CPS-MC341-ADSC1-111, CPS-MC341-ADSC1-931, CPS-MC341-ADSC2-111, CPS-MC341G-ADSC1-110, CPS-MC341Q-ADSC1-111, CPS-MC341-DS1-111, CPS-MC341-DS11-111, CPS-MC341-DS2-911, and CPS-MC341-A1-111), and M2M Controller Configurable Type with firmware Ver.3.8.8 and earlier versions (CPS-MCS341-DS1-111, CPS-MCS341-DS1-131, CPS-MCS341G-DS1-130, CPS-MCS341G5-DS1-130, and CPS-MCS341Q-DS1-131).

Microhard Systems IPn4G 1.1.0 contains a service vulnerability that allows authenticated users to enable a restricted SSH shell with a default 'msshc' user. Attackers can exploit a custom 'ping' command in the NcFTP environment to escape the restricted shell and execute commands with root privileges.

The post-authentication command injection vulnerability in the CLI command of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker to execute some OS commands remotely.

Nextcloud server is an open source home cloud implementation. In affected versions a missing scope validation allowed users to create workflows which are designed to be only available for administrators. Some workflows are designed to be RCE by invoking defined scripts, in order to generate PDFs, invoking webhooks or running scripts on the server. Due to this combination depending on the available apps the issue can result in a RCE at the end. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. Users unable to upgrade should disable app `workflow_scripts` and `workflow_pdf_converter` as a mitigation.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

The Xiaomi router AX9000 has a post-authentication command injection vulnerability. This vulnerability is caused by the lack of input filtering, allowing an attacker to exploit it to obtain root access to the device.

ZoneMinder is a free, open source Closed-circuit television software application for Linux which supports IP, USB and Analog cameras. Versions prior to 1.36.33 and 1.37.33 contain an OS Command Injection via daemonControl() in (/web/api/app/Controller/HostController.php). Any authenticated user can construct an api command to execute any shell command as the web user. This issue is patched in versions 1.36.33 and 1.37.33.

Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted string, an attacker could modify the device name of an attached PLC adapter to inject and execute arbitrary commands on the system with root privileges.

mailcow is a dockerized email package, with multiple containers linked in one bridged network. The Sync Job feature - which can be made available to standard users by assigning them the necessary permission - suffers from a shell command injection. A malicious user can abuse this vulnerability to obtain shell access to the Docker container running dovecot. The imapsync Perl script implements all the necessary functionality for this feature, including the XOAUTH2 authentication mechanism. This code path creates a shell command to call openssl. However, since different parts of the specified user password are included without any validation, one can simply execute additional shell commands. Notably, the default ACL for a newly-created mailcow account does not include the necessary permission. The Issue has been fixed within the 2023-03 Update (March 3rd 2023). As a temporary workaround the Syncjob ACL can be removed from all mailbox users, preventing from creating or changing existing Syncjobs.

Nagios XI before 5.6.6 allows remote command execution as root. The exploit requires access to the server as the nagios user, or access as the admin user via the web interface. The getprofile.sh script, invoked by downloading a system profile (profile.php?cmd=download), is executed as root via a passwordless sudo entry; the script executes check_plugin, which is owned by the nagios user. A user logged into Nagios XI with permissions to modify plugins, or the nagios user on the server, can modify the check_plugin executable and insert malicious commands to execute as root.

Advantech EKI-1524, EKI-1522, EKI-1521 devices through 1.21 are affected by an command injection vulnerability in the device name input field, which can be triggered by authenticated users via a crafted POST request.

EPrints 3.4.2 allows remote attackers to execute arbitrary commands via crafted input to the verb parameter in a cgi/toolbox/toolbox URI.

SAP Business Object (Adaptive Job Server) - versions 420, 430, allows remote execution of arbitrary commands on Unix, when program objects execution is enabled, to authenticated users with scheduling rights, using the BI Launchpad, Central Management Console or a custom application based on the public java SDK. Programs could impact the confidentiality, integrity and availability of the system.

An improper neutralization of special elements used in an OS command vulnerability in the command line interpreter of FortiAuthenticator before 6.3.1 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

An improper neutralization of special elements used in an OS Command vulnerability in FortiSandbox 3.2.0 through 3.2.2, 3.1.0 through 3.1.4, and 3.0.0 through 3.0.6 may allow an authenticated attacker with access to the web GUI to execute unauthorized code or commands via specifically crafted HTTP requests.

NeDi 1.9C allows an authenticated user to execute operating system commands in the Nodes Traffic function on the endpoint /Nodes-Traffic.php via the md or ag HTTP GET parameter. This allows an attacker to obtain access to the operating system where NeDi is installed and to all application data.

cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. If you use the Backend Error Handler (beh) to create an accessible network printer, this security vulnerability can cause remote code execution. `beh.c` contains the line `retval = system(cmdline) >> 8;` which calls the `system` command with the operand `cmdline`. `cmdline` contains multiple user controlled, unsanitized values. As a result an attacker with network access to the hosted print server can exploit this vulnerability to inject system commands which are executed in the context of the running server. This issue has been addressed in commit `8f2740357` and is expected to be bundled in the next release. Users are advised to upgrade when possible and to restrict access to network printers in the meantime.

A SQL injection vulnerability exists in the vendor_country parameter of the “vendor print report” feature of the ScienceLogic SL1 that takes unsanitized user‐controlled input and passes it directly to a SQL query. This allows for the injection of arbitrary SQL before being executed against the database.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.4 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

NVIDIA DGX-1 BMC contains a vulnerability in the SPX REST API, where an attacker with the appropriate level of authorization can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, and data tampering.

A vulnerability in the IBM TS7700 Management Interface 8.51.2.12, 8.52.200.111, 8.52.102.13, and 8.53.0.63 could allow an authenticated user to submit a specially crafted URL leading to privilege escalation and remote code execution. IBM X-Force ID: 246320.

Advantech EKI-1524, EKI-1522, EKI-1521 devices through 1.21 are affected by an command injection vulnerability in the NTP server input field, which can be triggered by authenticated users via a crafted POST request.

A remote unauthorized access vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.