In intel_pmu_drain_pebs_nhm in arch/x86/events/intel/ds.c in the Linux kernel through 5.11.8 on some Haswell CPUs, userspace applications (such as perf-fuzzer) can cause a system crash because the PEBS status in a PEBS record is mishandled, aka CID-d88d05a9e0b6.

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is called only when the timer is enabled, we need to call j1939_session_deactivate_activate_next() if we cancelled the timer. Otherwise, refcount for j1939_session leaks, which will later appear as | unregister_netdevice: waiting for vcan0 to become free. Usage count = 2. problem.

In the Linux kernel, the following vulnerability has been resolved: idpf: detach and close netdevs while handling a reset Protect the reset path from callbacks by setting the netdevs to detached state and close any netdevs in UP state until the reset handling has completed. During a reset, the driver will de-allocate resources for the vport, and there is no guarantee that those will recover, which is why the existing vport_ctrl_lock does not provide sufficient protection. idpf_detach_and_close() is called right before reset handling. If the reset handling succeeds, the netdevs state is recovered via call to idpf_attach_and_open(). If the reset handling fails the netdevs remain down. The detach/down calls are protected with RTNL lock to avoid racing with callbacks. On the recovery side the attach can be done without holding the RTNL lock as there are no callbacks expected at that point, due to detach/close always being done first in that flow. The previous logic restoring the netdevs state based on the IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is still being used to restore the state of the netdevs following the reset, but has no use outside of the reset handling flow. idpf_init_hard_reset() is converted to void, since it was used as such and there is no error handling being done based on its return value. Before this change, invoking hard and soft resets simultaneously will cause the driver to lose the vport state: ip -br a <inf> UP echo 1 > /sys/class/net/ens801f0/device/reset& \ ethtool -L ens801f0 combined 8 ip -br a <inf> DOWN ip link set <inf> up ip -br a <inf> DOWN Also in case of a failure in the reset path, the netdev is left exposed to external callbacks, while vport resources are not initialized, leading to a crash on subsequent ifup/down: [408471.398966] idpf 0000:83:00.0: HW reset detected [408471.411744] idpf 0000:83:00.0: Device HW Reset initiated [408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2 [408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078 [408508.126112] #PF: supervisor read access in kernel mode [408508.126687] #PF: error_code(0x0000) - not-present page [408508.127256] PGD 2aae2f067 P4D 0 [408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI ... [408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf] ... [408508.139193] Call Trace: [408508.139637] <TASK> [408508.140077] __dev_close_many+0xbb/0x260 [408508.140533] __dev_change_flags+0x1cf/0x280 [408508.140987] netif_change_flags+0x26/0x70 [408508.141434] dev_change_flags+0x3d/0xb0 [408508.141878] devinet_ioctl+0x460/0x890 [408508.142321] inet_ioctl+0x18e/0x1d0 [408508.142762] ? _copy_to_user+0x22/0x70 [408508.143207] sock_do_ioctl+0x3d/0xe0 [408508.143652] sock_ioctl+0x10e/0x330 [408508.144091] ? find_held_lock+0x2b/0x80 [408508.144537] __x64_sys_ioctl+0x96/0xe0 [408508.144979] do_syscall_64+0x79/0x3d0 [408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e [408508.145860] RIP: 0033:0x7f3e0bb4caff

An issue was discovered in fs/io_uring.c in the Linux kernel through 5.11.8. It allows attackers to cause a denial of service (deadlock) because exit may be waiting to park a SQPOLL thread, but concurrently that SQPOLL thread is waiting for a signal to start, aka CID-3ebba796fa25.

In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don't enable IRQ from sync_print_obj() Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq().

In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks.

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated

A NULL pointer dereference was found in io_file_bitmap_get in io_uring/filetable.c in the io_uring sub-component in the Linux Kernel. When fixed files are unregistered, some context information (file_alloc_{start,end} and alloc_hint) is not cleared. A subsequent request that has auto index selection enabled via IORING_FILE_INDEX_ALLOC can cause a NULL pointer dereference. An unprivileged user can use the flaw to cause a system crash.

In the Linux kernel, the following vulnerability has been resolved: mm: use memalloc_nofs_save() in page_cache_ra_order() See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"), ensure that page_cache_ra_order() do not attempt to reclaim file-backed pages too, or it leads to a deadlock, found issue when test ext4 large folio. INFO: task DataXceiver for:7494 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200 Call trace: __switch_to+0x14c/0x240 __schedule+0x82c/0xdd0 schedule+0x58/0xf0 io_schedule+0x24/0xa0 __folio_lock+0x130/0x300 migrate_pages_batch+0x378/0x918 migrate_pages+0x350/0x700 compact_zone+0x63c/0xb38 compact_zone_order+0xc0/0x118 try_to_compact_pages+0xb0/0x280 __alloc_pages_direct_compact+0x98/0x248 __alloc_pages+0x510/0x1110 alloc_pages+0x9c/0x130 folio_alloc+0x20/0x78 filemap_alloc_folio+0x8c/0x1b0 page_cache_ra_order+0x174/0x308 ondemand_readahead+0x1c8/0x2b8 page_cache_async_ra+0x68/0xb8 filemap_readahead.isra.0+0x64/0xa8 filemap_get_pages+0x3fc/0x5b0 filemap_splice_read+0xf4/0x280 ext4_file_splice_read+0x2c/0x48 [ext4] vfs_splice_read.part.0+0xa8/0x118 splice_direct_to_actor+0xbc/0x288 do_splice_direct+0x9c/0x108 do_sendfile+0x328/0x468 __arm64_sys_sendfile64+0x8c/0x148 invoke_syscall+0x4c/0x118 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x4c/0x1f8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix crash when adding interface under a lag Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag") fixed a similar issue in the lan966x driver caused by a NULL pointer dereference. The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic and is susceptible to the same crash. This issue specifically affects the ocelot_vsc7514.c frontend, which leaves unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as it uses the DSA framework which registers all ports. Fix this by checking if the port pointer is valid before accessing it.

In the Linux kernel, the following vulnerability has been resolved: idpf: Fix RSS LUT NULL pointer crash on early ethtool operations The RSS LUT is not initialized until the interface comes up, causing the following NULL pointer crash when ethtool operations like rxhash on/off are performed before the interface is brought up for the first time. Move RSS LUT initialization from ndo_open to vport creation to ensure LUT is always available. This enables RSS configuration via ethtool before bringing the interface up. Simplify LUT management by maintaining all changes in the driver's soft copy and programming zeros to the indirection table when rxhash is disabled. Defer HW programming until the interface comes up if it is down during rxhash and LUT configuration changes. Steps to reproduce: ** Load idpf driver; interfaces will be created modprobe idpf ** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off [89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000 [89408.371908] #PF: supervisor read access in kernel mode [89408.371924] #PF: error_code(0x0000) - not-present page [89408.371940] PGD 0 P4D 0 [89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [89408.372052] RIP: 0010:memcpy_orig+0x16/0x130 [89408.372310] Call Trace: [89408.372317] <TASK> [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf] [89408.372363] __netdev_update_features+0x295/0xde0 [89408.372384] ethnl_set_features+0x15e/0x460 [89408.372406] genl_family_rcv_msg_doit+0x11f/0x180 [89408.372429] genl_rcv_msg+0x1ad/0x2b0 [89408.372446] ? __pfx_ethnl_set_features+0x10/0x10 [89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10 [89408.372482] netlink_rcv_skb+0x58/0x100 [89408.372502] genl_rcv+0x2c/0x50 [89408.372516] netlink_unicast+0x289/0x3e0 [89408.372533] netlink_sendmsg+0x215/0x440 [89408.372551] __sys_sendto+0x234/0x240 [89408.372571] __x64_sys_sendto+0x28/0x30 [89408.372585] x64_sys_call+0x1909/0x1da0 [89408.372604] do_syscall_64+0x7a/0xfa0 [89408.373140] ? clear_bhb_loop+0x60/0xb0 [89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e [89408.378887] </TASK> <snip>

In the Linux kernel, the following vulnerability has been resolved: arp: do not assume dev_hard_header() does not change skb->head arp_create() is the only dev_hard_header() caller making assumption about skb->head being unchanged. A recent commit broke this assumption. Initialize @arp pointer after dev_hard_header() call.

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_nxt is properly initialized on connect Christoph reported a splat hinting at a corrupted snd_una: WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Modules linked in: CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8 8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe <0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9 RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4 RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000 R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0 Call Trace: <TASK> __mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline] mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline] __mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615 mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767 process_one_work+0x1e0/0x560 kernel/workqueue.c:3254 process_scheduled_works kernel/workqueue.c:3335 [inline] worker_thread+0x3c7/0x640 kernel/workqueue.c:3416 kthread+0x121/0x170 kernel/kthread.c:388 ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> When fallback to TCP happens early on a client socket, snd_nxt is not yet initialized and any incoming ack will copy such value into snd_una. If the mptcp worker (dumbly) tries mptcp-level re-injection after such ack, that would unconditionally trigger a send buffer cleanup using 'bad' snd_una values. We could easily disable re-injection for fallback sockets, but such dumb behavior already helped catching a few subtle issues and a very low to zero impact in practice. Instead address the issue always initializing snd_nxt (and write_seq, for consistency) at connect time.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent NULL dereference in ip6_output() According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: tls: get psock ref after taking rxlock to avoid leak At the start of tls_sw_recvmsg, we take a reference on the psock, and then call tls_rx_reader_lock. If that fails, we return directly without releasing the reference. Instead of adding a new label, just take the reference after locking has succeeded, since we don't need it before.

An issue was discovered in the Linux kernel through 5.11.10. drivers/net/ethernet/freescale/gianfar.c in the Freescale Gianfar Ethernet driver allows attackers to cause a system crash because a negative fragment size is calculated in situations involving an rx queue overrun when jumbo packets are used and NAPI is enabled, aka CID-d8861bab48b6.

A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.

In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made.

A memory leak flaw and potential divide by zero and Integer overflow was found in the Linux kernel V4L2 and vivid test code functionality. This issue occurs when a user triggers ioctls, such as VIDIOC_S_DV_TIMINGS ioctl. This could allow a local user to crash the system if vivid test code enabled.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

An issue was discovered in fs/fuse/fuse_i.h in the Linux kernel before 5.11.8. A "stall on CPU" can occur because a retry loop continually finds the same bad inode, aka CID-775c5033a0d1.

In the Linux kernel, the following vulnerability has been resolved: debugfs: fix wait/cancellation handling during remove Ben Greear further reports deadlocks during concurrent debugfs remove while files are being accessed, even though the code in question now uses debugfs cancellations. Turns out that despite all the review on the locking, we missed completely that the logic is wrong: if the refcount hits zero we can finish (and need not wait for the completion), but if it doesn't we have to trigger all the cancellations. As written, we can _never_ get into the loop triggering the cancellations. Fix this, and explain it better while at it.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

The Linux kernel io_uring IORING_OP_SOCKET operation contained a double free in function __sys_socket_file() in file net/socket.c. This issue was introduced in da214a475f8bd1d3e9e7a19ddfeb4d1617551bab and fixed in 649c15c7691e9b13cbe9bf6c65c365350e056067.

A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - don't sleep when in softirq When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00?

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: fix refcount leak on error path When failing to allocate report_desc, opts->refcnt has already been incremented so it needs to be decremented to avoid leaving the options structure permanently locked.

In the Linux kernel, the following vulnerability has been resolved: kcm: annotate data-races around kcm->rx_wait kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. syzbot reported: BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1: reserve_rx_kcm net/kcm/kcmsock.c:283 [inline] kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0: kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix warning without PTE_MARKER_UFFD_WP compiled in When PTE_MARKER_UFFD_WP not configured, it's still possible to reach pte marker code and trigger an warning. Add a few CONFIG_PTE_MARKER_UFFD_WP ifdefs to make sure the code won't be reached when not compiled in.

In the Linux kernel, the following vulnerability has been resolved: video/aperture: Call sysfb_disable() before removing PCI devices Call sysfb_disable() from aperture_remove_conflicting_pci_devices() before removing PCI devices. Without, simpledrm can still bind to simple-framebuffer devices after the hardware driver has taken over the hardware. Both drivers interfere with each other and results are undefined. Reported modesetting errors [1] are shown below. ---- snap ---- rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008 Call Trace: <TASK> ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> ... rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e Call Trace: <TASK> ? memcpy_toio+0x76/0xc0 ? memcpy_toio+0x1b/0xc0 ? drm_fb_memcpy_toio+0x76/0xb0 ? drm_fb_blit_toio+0x75/0x2b0 ? simpledrm_simple_display_pipe_update+0x132/0x150 ? drm_atomic_helper_commit_planes+0xb6/0x230 ? drm_atomic_helper_commit_tail+0x44/0x80 ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> The problem was added by commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") to v6.0.3 and does not exist in the mainline branch. The mainline commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") has been backported from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that reworks fbdev framebuffer ownership. The backport misses a change to aperture_remove_conflicting_pci_devices(). Mainline itself is fine, because the function does not exist there as a result of the patch series. Instead of backporting the whole series, fix the additional function.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Fix global state lock backoff We need to grab the lock after the early return for !hwpipe case. Otherwise, we could have hit contention yet still returned 0. Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged in CI: WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154 Modules linked in: CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock+0xf8/0x154 lr : drm_atomic_get_private_obj_state+0x84/0x170 sp : ffff80000cfab6a0 x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00 x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58 x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001 x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038 x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0 x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610 x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029 x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58 Call trace: drm_modeset_lock+0xf8/0x154 drm_atomic_get_private_obj_state+0x84/0x170 mdp5_get_global_state+0x54/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x2ec/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 ... ---[ end trace 0000000000000000 ]--- drm_modeset_lock attempting to lock a contended lock without backoff: drm_modeset_lock+0x148/0x154 mdp5_get_global_state+0x30/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x290/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 drm_atomic_check_only+0x4b0/0x8f4 drm_atomic_commit+0x68/0xe0 Patchwork: https://patchwork.freedesktop.org/patch/492701/

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix bridge lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP bridges, previously allocated bridges will leak on probe deferral. Fix this by amending the DP parser interface and tying the lifetime of the bridge device to the DRM device rather than DP platform device. Patchwork: https://patchwork.freedesktop.org/patch/502667/

In the Linux kernel, the following vulnerability has been resolved: net: hns: fix possible memory leak in hnae_ae_register() Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf]

In the Linux kernel, the following vulnerability has been resolved: mtd: maps: pxa2xx-flash: fix memory leak in probe Free 'info' upon remapping error to avoid a memory leak. [<miquel.raynal@bootlin.com>: Reword the commit log]

In the Linux kernel, the following vulnerability has been resolved: ARM: dts: qcom: replace gcc PXO with pxo_board fixed clock Replace gcc PXO phandle to pxo_board fixed clock declared in the dts. gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a kernel panic if any driver actually try to use it.

In the Linux kernel, the following vulnerability has been resolved: firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will not be freed through rpi_firmware_delete(), fix this leak by calling kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on destination blkaddr during recovery As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 loop5: detected capacity change from 0 to 131072 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): Bitmap was wrongly set, blk:5634 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198 RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs] Call Trace: <TASK> f2fs_do_replace_block+0xa98/0x1890 [f2fs] f2fs_replace_block+0xeb/0x180 [f2fs] recover_data+0x1a69/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic instead of warning. The root cause is: in fuzzed image, SIT table is inconsistent with inode mapping table, result in triggering such warning during SIT table update. This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this flag, data block recovery flow can check destination blkaddr's validation in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() As comment of pci_get_device() says, it returns a pci_device with its refcount increased. We need to call pci_dev_put() to decrease the refcount. Save the return value of pci_get_device() and call pci_dev_put() to decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: soc: amlogic: Fix refcount leak in meson-secure-pwrc.c In meson_secure_pwrc_probe(), there is a refcount leak in one fail path.

In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: zynq: Fix refcount leak in zynq_get_revision of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net/tunnel: wait until all sk_user_data reader finish before releasing the sock There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock.

In the Linux kernel, the following vulnerability has been resolved: ocxl: fix pci device refcount leak when calling get_function_0() get_function_0() calls pci_get_domain_bus_and_slot(), as comment says, it returns a pci device with refcount increment, so after using it, pci_dev_put() needs be called. Get the device reference when get_function_0() is not called, so pci_dev_put() can be called in the error path and callers unconditionally. And add comment above get_dvsec_vendor0() to tell callers to call pci_dev_put().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix size validation for non-exclusive domains (v4) Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the requested memory exists, else we get a kernel oops when dereferencing "man". v2: Make the patch standalone, i.e. not dependent on local patches. v3: Preserve old behaviour and just check that the manager pointer is not NULL. v4: Complain if GTT domain requested and it is uninitialized--most likely a bug.

In the Linux kernel, the following vulnerability has been resolved: dm thin: Use last transaction's pmd->root when commit failed Recently we found a softlock up problem in dm thin pool btree lookup code due to corrupted metadata: Kernel panic - not syncing: softlockup: hung tasks CPU: 7 PID: 2669225 Comm: kworker/u16:3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: <IRQ> dump_stack+0x9c/0xd3 panic+0x35d/0x6b9 watchdog_timer_fn.cold+0x16/0x25 __run_hrtimer+0xa2/0x2d0 </IRQ> RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio] __bufio_new+0x11f/0x4f0 [dm_bufio] new_read+0xa3/0x1e0 [dm_bufio] dm_bm_read_lock+0x33/0xd0 [dm_persistent_data] ro_step+0x63/0x100 [dm_persistent_data] btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data] dm_btree_lookup+0x16f/0x210 [dm_persistent_data] dm_thin_find_block+0x12c/0x210 [dm_thin_pool] __process_bio_read_only+0xc5/0x400 [dm_thin_pool] process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool] process_one_work+0x3c5/0x730 Following process may generate a broken btree mixed with fresh and stale btree nodes, which could get dm thin trapped in an infinite loop while looking up data block: Transaction 1: pmd->root = A, A->B->C // One path in btree pmd->root = X, X->Y->Z // Copy-up Transaction 2: X,Z is updated on disk, Y write failed. // Commit failed, dm thin becomes read-only. process_bio_read_only dm_thin_find_block __find_block dm_btree_lookup(pmd->root) The pmd->root points to a broken btree, Y may contain stale node pointing to any block, for example X, which gets dm thin trapped into a dead loop while looking up Z. Fix this by setting pmd->root in __open_metadata(), so that dm thin will use the last transaction's pmd->root if commit failed. Fetch a reproducer in [Link]. Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790