ABB is aware of vulnerabilities in the product versions listed below. An update is available that resolves the reported vulnerabilities in the product versions under maintenance. An attacker who successfully exploited one or more of these vulnerabilities could cause the product to stop or make the product inaccessible.  Numeric Range Comparison Without Minimum Check vulnerability in ABB Freelance controllers AC 700F (Controller modules), ABB Freelance controllers AC 900F (controller modules).This issue affects: Freelance controllers AC 700F:  from 9.0;0 through V9.2 SP2, through Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019, through Freelance 2019 SP1, through Freelance 2019 SP1 FP1;  Freelance controllers AC 900F:  Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019, through Freelance 2019 SP1, through Freelance 2019 SP1 FP1.

ABB is aware of vulnerabilities in the product versions listed below. An update is available that resolves the reported vulnerabilities in the product versions under maintenance. An attacker who successfully exploited one or more of these vulnerabilities could cause the product to stop or make the product inaccessible. Stack-based Buffer Overflow vulnerability in ABB Freelance controllers AC 700F (conroller modules), ABB Freelance controllers AC 900F (controller modules).This issue affects:  Freelance controllers AC 700F:  from 9.0;0 through V9.2 SP2, through Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019 , through Freelance 2019 SP1, through Freelance 2019 SP1 FP1;  Freelance controllers AC 900F:  through Freelance 2013, through Freelance 2013SP1, through Freelance 2016, through Freelance 2016SP1, through Freelance 2019, through Freelance 2019 SP1, through Freelance 2019 SP1 FP1.

Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE. When the REST interface is enabled by the user, and an attacker gains access to the control network, and user/password broker authentication is enabled, and CVE-2025-6074 is exploited, the attacker can overflow the buffer for username or password. This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016.

Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE. When the REST interface is enabled by the user, and an attacker gains access to the control network, and CVE-2025-6074 is exploited, the attacker can use the JSON configuration to overflow the date of expiration field.This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016.

ABB has internally identified a vulnerability in the ABB VPNI feature of the S+ Control API component which may be used by several Symphony Plus products (e.g., S+ Operations, S+ Engineering and S+ Analyst) This issue affects Symphony Plus S+ Operations: from 3..0;0 through 3.3 SP1 RU4, from 2.1;0 through 2.1 SP2 RU3, from 2.0;0 through 2.0 SP6 TC6; Symphony Plus S+ Engineering: from 2.1 through 2.3 RU3; Symphony Plus S+ Analyst: from 7.0.0.0 through 7.2.0.2.

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

Improper Input Validation vulnerability in ABB 800xA, Control Software for AC 800M, Control Builder Safe, Compact Product Suite - Control and I/O, ABB Base Software for SoftControl allows an attacker to cause the denial of service.

Improper Handling of Exceptional Conditions, Improper Check for Unusual or Exceptional Conditions vulnerability in the ABB SPIET800 and PNI800 module that allows an attacker to cause the denial of service or make the module unresponsive.

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

For the Central Licensing Server component used in ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, ABB AbilityTM SCADAvantage versions 5.1 to 5.6.5, a weakness in validation of input exists that allows an attacker to block license handling by sending specially crafted messages to the CLS web service.

The vulnerabilities can be exploited to cause the web visualization component of the PLC to stop and not respond, leading to genuine users losing remote visibility of the PLC state. If a user attempts to login to the PLC while this vulnerability is exploited, the PLC will show an error state and refuse connections to Automation Builder. The execution of the PLC application is not affected by this vulnerability. This issue affects ABB AC500 V2 products with onboard Ethernet.

A S+ Operations and S+ Historian service is subject to a DoS by special crafted messages. An attacker might use this flaw to make it crash or even execute arbitrary code on the machine where the service is hosted.

Missing Authentication for Critical Function vulnerability in ABB Aspect.This issue affects Aspect: All versions.

Missing Authentication for Critical Function vulnerability in ABB Aspect.This issue affects Aspect: All versions.

A Missing Authentication vulnerability in RobotWare for the OmniCore robot controller allows an attacker to read and modify files on the robot controller if the attacker has access to the Connected Services Gateway Ethernet port.

ABB MicroSCADA Pro SYS600 version 9.3 suffers from an instance of CWE-306: Missing Authentication for Critical Function.

ABB eSOMS versions 4.0 to 6.0.3 use ASP.NET Viewstate without Message Authentication Code (MAC). Alterations to Viewstate might thus not be noticed.

The web server in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway allows access to different endpoints of the application without authenticating by accessing a specific uniform resource locator (URL) , violating the access-control (ACL) rules. This issue allows obtaining sensitive information that may aid in further attacks and privilege escalation.

A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V5.5). The affected systems allow any unauthenticated client to disconnect any active user from the server. An attacker could use this vulnerability to prevent any user to perform actions in the system, causing a denial of service situation.

The reminder module lacks an authentication mechanism for broadcasts received. Successful exploitation of this vulnerability may affect availability.

An issue in the component tpi_systool_handle(0) (/goform/SysToolReboot) of Tenda W6-S v1.0.0.4(510) allows unauthenticated attackers to arbitrarily reboot the device.

DuraComm SPM-500 DP-10iN-100-MU lacks access controls for a function that should require user authentication. This could allow an attacker to repeatedly reboot the device.

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to replace system licenses through a web interface intended for license renewal. Attackers can exploit this to replace valid licenses with expired or trial licenses, causing denial of service.

D-Link D-View shutdown_coreserver Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the shutdown_coreserver action. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-19572.

One of the usage insights HTTP API endpoints in Grafana Enterprise 6.x before 6.7.6, 7.x before 7.3.10, and 7.4.x before 7.4.5 is accessible without any authentication. This allows any unauthenticated user to send an unlimited number of requests to the endpoint, leading to a denial of service (DoS) attack against a Grafana Enterprise instance.

CyberData  011209 Intercom exposes features that could allow an unauthenticated to gain access and cause a denial-of-service condition or system disruption.

In Fibaro Home Center 2 and Lite devices with firmware version 4.600 and older an internal management service is accessible on port 8000 and some API endpoints could be accessed without authentication to trigger a shutdown, a reboot or a reboot into recovery mode.

ClipBucket V5 provides open source video hosting with PHP. Prior to 5.5.1 - 238, ClipBucket V5 allows unauthenticated attackers to change the template directory via a directory traversal, which results in a denial of service.

In Apache NiFi 1.0.0 to 1.11.4, the NiFi download token (one-time password) mechanism used a fixed cache size and did not authenticate a request to create a download token, only when attempting to use the token to access the content. An unauthenticated user could repeatedly request download tokens, preventing legitimate users from requesting download tokens.

A vulnerability in the MSC800 allows an unauthenticated attacker to modify the product’s IP address over Sopas ET. This can lead to Denial of Service. Users are recommended to upgrade both MSC800 and MSC800 LFT to version V4.26 and S2.93.20 respectively which fixes this issue.

The endpoint hosts a script that allows an unauthorized remote attacker to put the system in a fail-safe state over the network due to missing authentication.

An unauthenticated remote attacker can access a URL which causes the device to reboot.

SAP NetWeaver AS JAVA, versions - (ENGINEAPI 7.10; WSRM 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50; J2EE-FRMW 7.10, 7.11), does not perform any authentication checks for a web service allowing the attacker to send several payloads and leading to complete denial of service.

Hydra is a Continuous Integration service for Nix based projects. It is possible to trigger evaluations in Hydra without any authentication. Depending on the size of evaluations, this can impact the availability of systems. The problem can be fixed by applying https://github.com/NixOS/hydra/commit/f73043378907c2c7e44f633ad764c8bdd1c947d5 to any Hydra package. Users are advised to upgrade. Users unable to upgrade should deny the `/api/push` route in a reverse proxy. This also breaks the "Evaluate jobset" button in the frontend.

A denial of service vulnerability exists in the OAS Engine SecureConfigValues functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted network request can lead to loss of communications. An attacker can send a network request to trigger this vulnerability.

An access control issue in the component /ManageRoute/postRoute of FreeTAKServer v1.9.8 allows unauthenticated attackers to cause a Denial of Service (DoS) via an unusually large amount of created routes, or create unsafe or false routes for legitimate users.

Missing authentication for critical function exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote unauthenticated attacker to execute some critical functions without authentication, e.g., rebooting the product.

Due to missing authentication check, SAP Business one License service API - version 10.0 allows an unauthenticated attacker to send malicious http requests over the network. On successful exploitation, an attacker can break the whole application making it inaccessible.

Missing Authentication for Critical Function in SICK Flexi Classic and Flexi Soft Gateways with Partnumbers 1042193, 1042964, 1044078, 1044072, 1044073, 1044074, 1099830, 1099832, 1127717, 1069070, 1112296, 1051432, 1102420, 1127487, 1121596, 1121597 allows an unauthenticated remote attacker to influence the availability of the device by changing the IP settings of the device via broadcasted UDP packets.

LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication to perform critical functions to the PLC. This could allow an attacker to change the PLC's mode arbitrarily.

The affected product is vulnerable due to missing authentication, which may allow an attacker to read or modify sensitive data and execute arbitrary code, resulting in a denial-of-service condition.

A Missing Authentication for Critical Function vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to easily exhaust available disk resources leading to DoS. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37.

Permission control vulnerability in the audio module. Successful exploitation of this vulnerability may cause audio devices to perform abnormally.

TadTools special page is vulnerable to authorization bypass, thus remote attackers can use the specific parameter to delete arbitrary files in the system without logging in.

AVE DOMINAplus <=1.10.x suffers from an unauthenticated reboot command execution. Attackers can exploit this issue to cause a denial of service scenario.

When connecting to a certain port Axeda agent (All versions) and Axeda Desktop Server for Windows (All versions) may allow an attacker to send a certain command to a specific port without authentication. Successful exploitation of this vulnerability could allow a remote unauthenticated attacker to shut down a specific service.

In Contour ( Ingress controller for Kubernetes) before version 1.7.0, a bad actor can shut down all instances of Envoy, essentially killing the entire ingress data plane. GET requests to /shutdown on port 8090 of the Envoy pod initiate Envoy's shutdown procedure. The shutdown procedure includes flipping the readiness endpoint to false, which removes Envoy from the routing pool. When running Envoy (For example on the host network, pod spec hostNetwork=true), the shutdown manager's endpoint is accessible to anyone on the network that can reach the Kubernetes node that's running Envoy. There is no authentication in place that prevents a rogue actor on the network from shutting down Envoy via the shutdown manager endpoint. Successful exploitation of this issue will lead to bad actors shutting down all instances of Envoy, essentially killing the entire ingress data plane. This is fixed in version 1.7.0.

An unprotected logging route may allow an attacker to write endless log statements into the database without space limits or authentication. This results in consuming the entire available hard-disk space on the Ignition 8 Gateway (versions prior to 8.0.10), causing a denial-of-service condition.

ENTTEC Datagate MK2, Storm 24, Pixelator all firmware versions prior to (70044,70050,70060)_update_05032019-482 allows an unauthenticated user to initiate a remote reboot, which may be used to cause a denial of service condition.