A vulnerability was found in Tenda AC15 15.03.05.18 and classified as critical. Affected by this issue is the function saveParentControlInfo of the file /goform/saveParentControlInfo. The manipulation of the argument urls leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257774 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
AASync.com AASync version 2.2.1.0 suffers from an instance of CWE-121: Stack-based Buffer Overflow.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 65
There is a buffer overflow vulnerability in the underlying L2/L3 Management service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 3
LuaJIT through 2.1 and OpenRusty luajit2 before v2.1-20240626 have a stack-buffer-overflow in lj_strfmt_wfnum in lj_strfmt_num.c.
A stack-based buffer overflow vulnerability exists in the Programming Software Connection FileSelect functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to stack-based buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.This CVE tracks the stack-based buffer overflow that occurs at offset `0xb6e84` of v1.2.10.9 of the P3-550E firmware.
A vulnerability, which was classified as critical, has been found in Tenda AC15 15.03.05.18/15.03.20_multi. This issue affects the function formQuickIndex of the file /goform/QuickIndex. The manipulation of the argument PPPOEPassword leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257663. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A stack buffer overflow occurs in net/at/src/at_server.c in RT-Thread through 5.0.2.
A Stack Based Buffer Overflow vulnerability in Tenda AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the fromSetSysTime function.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 64
The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, unauthenticated attacker to /GponForm/fsetup_Form. An attacker can leverage this vulnerability to potentially execute arbitrary code.
The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to a stack buffer overflow in libAwgCgi.so's PARSERtoCHAR function. A remote, unauthenticated attacker can use this vulnerability to execute arbitrary code as root via a crafted request to the return.cgi endpoint.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 131
A stack-based buffer overflow vulnerability exists in the Programming Software Connection FileSelect functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to stack-based buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.This CVE tracks the stack-based buffer overflow that occurs at offset `0xb6e98` of v1.2.10.9 of the P3-550E firmware.
A vulnerability has been found in Tenda AC15 15.03.05.18/15.03.20_multi and classified as critical. Affected by this vulnerability is the function formWifiWpsOOB of the file /goform/WifiWpsOOB. The manipulation of the argument index leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257665 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 67
Advantech WebAccess before 8.4.3 allows unauthenticated remote attackers to execute arbitrary code or cause a denial of service (memory corruption) due to a stack-based buffer overflow when handling IOCTL 70533 RPC messages.
libcurl versions from 7.36.0 to before 7.64.0 are vulnerable to a stack-based buffer overflow. The function creating an outgoing NTLM type-3 header (`lib/vauth/ntlm.c:Curl_auth_create_ntlm_type3_message()`), generates the request HTTP header contents based on previously received data. The check that exists to prevent the local buffer from getting overflowed is implemented wrongly (using unsigned math) and as such it does not prevent the overflow from happening. This output data can grow larger than the local buffer if very large 'nt response' data is extracted from a previous NTLMv2 header provided by the malicious or broken HTTP server. Such a 'large value' needs to be around 1000 bytes or more. The actual payload data copied to the target buffer comes from the NTLMv2 type-2 response header.
A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8842 of biosig.c on the current master branch (35a819fa), when the Tag is 12: else if (tag==12) //0x0C { // sampling resolution if (len>6) fprintf(stderr,"Warning MFER tag12 incorrect length %i>6\n",len); val32 = 0; int8_t v8; curPos += ifread(&UnitCode,1,1,hdr); curPos += ifread(&v8,1,1,hdr); curPos += ifread(buf,1,len-2,hdr); In addition to values of `len` greater than 130 triggering a buffer overflow, a value of `len` smaller than 2 will also trigger a buffer overflow due to an integer underflow when computing `len-2` in this code path.
ChaosPro 2.0 contains a buffer overflow vulnerability in the configuration file path handling that allows attackers to execute arbitrary code by overwriting the Structured Exception Handler. Attackers can craft a malicious configuration file with carefully constructed payload to overwrite memory and gain remote code execution on vulnerable Windows XP systems.
Ayukov NFTP client 1.71 contains a buffer overflow vulnerability in the SYST command handling that allows remote attackers to execute arbitrary code. Attackers can send a specially crafted SYST command with oversized payload to trigger a buffer overflow and execute a bind shell on port 5150.
FTP Navigator 8.03 contains a stack overflow vulnerability that allows attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) registers. Attackers can craft a malicious payload that triggers a buffer overflow when pasted into the Custom Command textbox, enabling remote code execution and launching the calculator as proof of concept.
A stack-based buffer overflow vulnerability exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.This vulnerability manifests on line 8970 of biosig.c on the current master branch (35a819fa), when the Tag is 63: else if (tag==63) { uint8_t tag2=255, len2=255; count = 0; while ((count<len) && !(FlagInfiniteLength && len2==0 && tag2==0)){ curPos += ifread(&tag2,1,1,hdr); curPos += ifread(&len2,1,1,hdr); if (VERBOSE_LEVEL==9) fprintf(stdout,"MFER: tag=%3i chan=%2i len=%-4i tag2=%3i len2=%3i curPos=%i %li count=%4i\n",tag,chan,len,tag2,len2,curPos,iftell(hdr),(int)count); if (FlagInfiniteLength && len2==0 && tag2==0) break; count += (2+len2); curPos += ifread(&buf,1,len2,hdr); Here, the number of bytes read is not the Data Length decoded from the current frame in the file (`len`) but rather is a new length contained in a single octet read from the same input file (`len2`). Despite this, a stack-based buffer overflow condition can still occur, as the destination buffer is still `buf`, which has a size of only 128 bytes, while `len2` can be as large as 255.
Several stack-based buffer overflow vulnerabilities exists in the MFER parsing functionality of The Biosig Project libbiosig 3.9.1. A specially crafted MFER file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger these vulnerabilities.When Tag is 133
A vulnerability classified as critical was found in Tenda AC15 15.03.05.18/15.03.20_multi. This vulnerability affects the function formExpandDlnaFile of the file /goform/expandDlnaFile. The manipulation of the argument filePath leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-257662 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130/9.3.5u.6698_B20230810. Affected is the function loginAuth of the file /cgi-bin/cstecgi.cgi of the component Web Interface. The manipulation of the argument http_host leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-254574 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Domain Quester Pro 6.02 contains a stack overflow vulnerability that allows remote attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) registers. Attackers can craft a malicious payload targeting the 'Domain Name Keywords' input field to trigger an access violation and execute a bind shell on port 9999.
Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the mitInterface parameter of fromAddressNat function.
Aida64 Engineer 6.10.5200 contains a buffer overflow vulnerability in the CSV logging configuration that allows attackers to execute malicious code by crafting a specially designed payload. Attackers can exploit the vulnerability by creating a malformed log file with carefully constructed SEH (Structured Exception Handler) overwrite techniques to achieve remote code execution.
MailCarrier 2.51 contains a buffer overflow vulnerability in the POP3 USER command that allows remote attackers to execute arbitrary code. Attackers can send a crafted oversized buffer to the POP3 service, overwriting memory and potentially gaining remote system access.
A vulnerability classified as problematic was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This vulnerability affects the function sub_40662C of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
FW-WGS-804HPT v1.305b241111 was discovered to contain a stack overflow via the remote_ip parameter in the web_snmpv3_remote_engineId_add_post function.
Buffer overflow in the Address Book of Mobile Device function of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Buffer overflow in mDNS NSEC record registering process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Buffer overflow in IPP number-up attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Buffer overflow in IPP sides attribute process of Office / Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *:Satera LBP660C Series/LBP620C Series/MF740C Series/MF640C Series firmware Ver.11.04 and earlier sold in Japan. Color imageCLASS LBP660C Series/LBP 620C Series/X LBP1127C/MF740C Series/MF640C Series/X MF1127C firmware Ver.11.04 and earlier sold in US. i-SENSYS LBP660C Series/LBP620C Series/MF740C Series/MF640C Series, C1127P, C1127iF, C1127i firmware Ver.11.04 and earlier sold in Europe.
Security Point (Windows) of MaLion and MaLionCloud contains a stack-based buffer overflow vulnerability in processing HTTP headers. Receiving a specially crafted request from a remote unauthenticated attacker could lead to arbitrary code execution with SYSTEM privilege.
In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "bits". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.
FW-WGS-804HPT v1.305b241111 was discovered to contain a stack overflow via the host_ip parameter in the web_snmp_notifyv3_add_post function.
A vulnerability, which was classified as critical, has been found in D-Link DIR-632 FW103B08. Affected by this issue is the function get_pure_content of the component HTTP POST Request Handler. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "identityref". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.
A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link DCS-960L v1.07.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction request header, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8458.
There is a stack overflow vulnerability in Tenda RX3 V1.0br_V16.03.13.11 In the fromSetWifiGusetBasic function of the web url /goform/ WifiGuestSet, the manipulation of the parameter shareSpeed leads to stack overflow.
In Advantech DiagAnywhere Server, Versions 3.07.11 and prior, multiple stack-based buffer overflow vulnerabilities exist in the file transfer service listening on the TCP port. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code with the privileges of the user running DiagAnywhere Server.
Insufficient validation of input parameters when changing configuration on Tbase server in B&R APROL versions < R 4.2-07 could result in buffer overflow. This may lead to Denial-of-Service conditions or execution of arbitrary code.
TurboVNC server code contains stack buffer overflow vulnerability in commit prior to cea98166008301e614e0d36776bf9435a536136e. This could possibly result into remote code execution, since stack frame is not protected with stack canary. This attack appear to be exploitable via network connectivity. To exploit this vulnerability authorization on server is required. These issues have been fixed in commit cea98166008301e614e0d36776bf9435a536136e.