There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.
RIOT-OS 2021.01 contains a buffer overflow vulnerability in sys/net/gnrc/routing/rpl/gnrc_rpl_validation.c through the gnrc_rpl_validation_options() function.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability has been identified in APOGEE MBC (PPC) (P2 Ethernet) (All versions >= V2.6.3), APOGEE MEC (PPC) (P2 Ethernet) (All versions >= V2.6.3), APOGEE PXC Compact (BACnet) (All versions < V3.5.3), APOGEE PXC Compact (P2 Ethernet) (All versions >= V2.8), APOGEE PXC Modular (BACnet) (All versions < V3.5.3), APOGEE PXC Modular (P2 Ethernet) (All versions >= V2.8), TALON TC Compact (BACnet) (All versions < V3.5.3), TALON TC Modular (BACnet) (All versions < V3.5.3). The web server of affected devices lacks proper bounds checking when parsing the Host parameter in HTTP requests, which could lead to a buffer overflow. An unauthenticated remote attacker could exploit this vulnerability to execute arbitrary code on the device with root privileges.
RIOT-OS 2021.01 contains a buffer overflow vulnerability in /sys/net/gnrc/routing/rpl/gnrc_rpl_control_messages.c through the _parse_options() function.
Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.
xfig 3.2.7 is vulnerable to Buffer Overflow.
The MsIo64.sys driver before 1.1.19.1016 in MSI Dragon Center before 2.0.98.0 has a buffer overflow that allows privilege escalation via a crafted 0x80102040, 0x80102044, 0x80102050, or 0x80102054 IOCTL request.
An issue was discovered in WeeChat before 2.7.1 (0.3.4 to 2.7 are affected). When a new IRC message 005 is received with longer nick prefixes, a buffer overflow and possibly a crash can happen when a new mode is set for a nick.
On SRX Series devices configured with UTM services a buffer overflow vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS may allow an attacker to arbitrarily execute code or commands on the target to take over or otherwise impact the device by sending crafted packets to or through the device. This issue affects: Juniper Networks Junos OS on SRX Series: 15.1X49 versions prior to 15.1X49-D190; 17.4 versions prior to 17.4R2-S9; 17.4R3 and later versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3-S1; 18.3 versions prior to 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2. An indicator of compromise can be the following text in the UTM log: RT_UTM: AV_FILE_NOT_SCANNED_PASSED_MT:
Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in RTI Connext Professional (Core Libraries, Queuing Service, Recording Service, Routing Service) allows Overflow Variables and Tags.This issue affects Connext Professional: from 7.4.0 before 7.5.0, from 7.0.0 before 7.3.0.5, from 6.1.0 before 6.1.2.21, from 6.0.0 before 6.0.1.40, from 5.0.0 before 5.3.1.45.
A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Catalina 10.15.6, Security Update 2020-004 Mojave, Security Update 2020-004 High Sierra. A buffer overflow may result in arbitrary code execution.
Firmware developed by Shenzhen Hichip Vision Technology (V6 through V20, after 2018-08-09 through 2020), as used by many different vendors in millions of Internet of Things devices, suffers from buffer overflow vulnerability that allows unauthenticated remote attackers to execute arbitrary code via the peer-to-peer (P2P) service. This affects products marketed under the following brand names: Accfly, Alptop, Anlink, Besdersec, BOAVISION, COOAU, CPVAN, Ctronics, D3D Security, Dericam, Elex System, Elite Security, ENSTER, ePGes, Escam, FLOUREON, GENBOLT, Hongjingtian (HJT), ICAMI, Iegeek, Jecurity, Jennov, KKMoon, LEFTEK, Loosafe, Luowice, Nesuniq, Nettoly, ProElite, QZT, Royallite, SDETER, SV3C, SY2L, Tenvis, ThinkValue, TOMLOV, TPTEK, WGCC, and ZILINK.
open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
A potential security vulnerability has been identified for certain HP multifunction printers (MFPs). The vulnerability may lead to Buffer Overflow and/or Remote Code Execution when running HP Workpath solutions on potentially affected products.
A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
eap.c in pppd in ppp 2.4.2 through 2.4.8 has an rhostname buffer overflow in the eap_request and eap_response functions.
irc_mode_channel_update in plugins/irc/irc-mode.c in WeeChat through 2.7 allows remote attackers to cause a denial of service (buffer overflow and application crash) or possibly have unspecified other impact via a malformed IRC message 324 (channel mode).
CA Unified Infrastructure Management (Nimsoft/UIM) 20.1, 20.3.x, and 9.20 and below contains a buffer overflow vulnerability in the robot (controller) component. A remote attacker can execute arbitrary code.
A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It's basically trusted input or input that needs an actual security flaw to be compromised or controlled.
The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.
A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (V1.81.01 - V1.81.03), LOGO! 8 BM (incl. SIPLUS variants) (V1.82.01), LOGO! 8 BM (incl. SIPLUS variants) (V1.82.02). A buffer overflow vulnerability exists in the Web Server functionality of the device. A remote unauthenticated attacker could send a specially crafted HTTP request to cause a memory corruption, potentially resulting in remote code execution.
A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A buffer overflow vulnerability was found in some devices of Hirschmann Automation and Control HiOS and HiSecOS. The vulnerability is due to improper parsing of URL arguments. An attacker could exploit this vulnerability by specially crafting HTTP requests to overflow an internal buffer. The following devices using HiOS Version 07.0.02 and lower are affected: RSP, RSPE, RSPS, RSPL, MSP, EES, EES, EESX, GRS, OS, RED. The following devices using HiSecOS Version 03.2.00 and lower are affected: EAGLE20/30.
Audio Conversion Wizard v2.01 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting memory with a specially crafted registration code. Attackers can generate a payload that overwrites the application's memory stack, potentially enabling remote code execution through a carefully constructed input buffer.
Buffer overflow vulnerability in TCP/IP function included in the firmware of GT14 Model of GOT 1000 series (GT1455-QTBDE CoreOS version "05.65.00.BD" and earlier, GT1450-QMBDE CoreOS version "05.65.00.BD" and earlier, GT1450-QLBDE CoreOS version "05.65.00.BD" and earlier, GT1455HS-QTBDE CoreOS version "05.65.00.BD" and earlier, and GT1450HS-QMBDE CoreOS version "05.65.00.BD" and earlier) allows a remote unauthenticated attacker to stop the network functions of the products or execute a malicious program via a specially crafted packet.
libImaging/PcxDecode.c in Pillow before 6.2.2 has a PCX P mode buffer overflow.
TCP/IP function included in the firmware of Mitsubishi Electric GOT2000 series (CoreOS with version -Y and earlier installed in GT27 Model, GT25 Model, and GT23 Model) contains a buffer overflow vulnerability, which may allow a remote attacker to stop the network functions of the products or execute a malicious program via a specially crafted packet.
Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a heap overflow in the nav2_amcl process. This vulnerability is triggered via sending a crafted message to the component /initialpose.
Buffer overflow vulnerability in TCP/IP function included in the firmware of MELSEC iQ-R series (RJ71EIP91 EtherNet/IP Network Interface Module First 2 digits of serial number are '02' or before, RJ71PN92 PROFINET IO Controller Module First 2 digits of serial number are '01' or before, RD81DL96 High Speed Data Logger Module First 2 digits of serial number are '08' or before, RD81MES96N MES Interface Module First 2 digits of serial number are '04' or before, and RD81OPC96 OPC UA Server Module First 2 digits of serial number are '04' or before) allows a remote unauthenticated attacker to stop the network functions of the products or execute a malicious program via a specially crafted packet.
BusyBox project BusyBox wget version prior to commit 8e2174e9bd836e53c8b9c6e00d1bc6e2a718686e contains a Buffer Overflow vulnerability in Busybox wget that can result in heap buffer overflow. This attack appear to be exploitable via network connectivity. This vulnerability appears to have been fixed in after commit 8e2174e9bd836e53c8b9c6e00d1bc6e2a718686e.
Valve's Game Networking Sockets prior to version v1.2.0 improperly handles long unreliable segments in function SNP_ReceiveUnreliableSegment() when configured to support plain-text messages, leading to a Heap-Based Buffer Overflow and resulting in a memory corruption and possibly even a remote code execution.
libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an SGI buffer overflow.
A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.
The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2.
In NetHack before 3.6.5, too long of a value for the SYMBOL configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.
A buffer overflow vulnerability in SonicOS allows a remote attacker to cause Denial of Service (DoS) and potentially execute arbitrary code by sending a malicious request to the firewall. This vulnerability affected SonicOS Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0.
A buffer overflow was addressed with improved size validation. This issue is fixed in iOS 13.4 and iPadOS 13.4, macOS Catalina 10.15.4, tvOS 13.4, watchOS 6.2, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. Multiple issues in libxml2.
IBM Watson IoT Message Gateway 2.0.0.x, 5.0.0.0, 5.0.0.1, and 5.0.0.2 is vulnerable to a buffer overflow, caused by improper bounds checking when handling a failed HTTP request with specific content in the headers. By sending a specially crafted HTTP request, a remote attacker could overflow a buffer and execute arbitrary code on the system or cause a denial of service. IBM X-Force ID: 174972.
In NetHack before 3.6.5, an extremely long value for the MENUCOLOR configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.
In NetHack before 3.6.5, detecting an unknown configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.
A vulnerability regarding buffer copy without checking size of input ('Classic Buffer Overflow') is found in the libjansson component and it does not affect the upstream library. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.
A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 13.4 and iPadOS 13.4, macOS Catalina 10.15.4, tvOS 13.4, watchOS 6.2, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. Multiple issues in libxml2.
A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 13.4 and iPadOS 13.4, macOS Catalina 10.15.4, tvOS 13.4, watchOS 6.2, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. Multiple issues in libxml2.
In NetHack before 3.6.5, an invalid extended command in value for the AUTOCOMPLETE configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.
Buffer overflow exists in Geovision Door Access Control device family, an unauthenticated remote attacker can execute arbitrary command.
Valve's Game Networking Sockets prior to version v1.2.0 improperly handles long encrypted messages in function AES_GCM_DecryptContext::Decrypt() when compiled using libsodium, leading to a Stack-Based Buffer Overflow and resulting in a memory corruption and possibly even a remote code execution.
Quick Player 1.3 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by crafting a malicious .m3l file with carefully constructed payload. Attackers can trigger the vulnerability by loading a specially crafted file through the application's file loading mechanism, potentially enabling remote code execution.