Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, for stream request bodies, maxBodyLength is bypassed when maxRedirects is set to 0 (native http/https transport path). Oversized streamed uploads are sent fully even when the caller sets strict body limits. This vulnerability is fixed in 1.15.1 and 0.31.1.

Axios is a promise based HTTP client for the browser and Node.js. When Axios starting in version 0.28.0 and prior to versions 0.30.2 and 1.12.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Versions 0.30.2 and 1.12.0 contain a patch for the issue.

An attacker can cause excessive memory growth in a Go server accepting HTTP/2 requests. HTTP/2 server connections contain a cache of HTTP header keys sent by the client. While the total number of entries in this cache is capped, an attacker sending very large keys can cause the server to allocate approximately 64 MiB per open connection.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections.

OpenClaw before 2026.3.31 contains an incomplete fix for CVE-2026-32062 where the voice-call component parses large WebSocket frames before start validation. Remote attackers can send oversized pre-start WebSocket frames to cause resource consumption and denial of service.

OpenClaw before 2026.3.22 contains an unbounded memory allocation vulnerability in remote media HTTP error handling that allows attackers to trigger excessive memory consumption. Attackers can send crafted HTTP error responses with large bodies to remote media endpoints, causing the application to allocate unbounded memory before failure handling occurs.

A client can trigger excessive memory allocation by generating a lot of errors responses over a single DoQ and DoH3 connection, as some resources were not properly released until the end of the connection.

nimiq-libp2p is a Nimiq network implementation based on libp2p. Prior to version 1.3.0, `MessageCodec::read_request` and `read_response` call `read_to_end()` on inbound substreams, so a remote peer can send only a partial frame and keep the substream open. because `Behaviour::new` also sets `with_max_concurrent_streams(1000)`, the node exposes a much larger stalled-slot budget than the library default. The patch for this vulnerability is formally released as part of v1.3.0. No known workarounds are available.

A client can trigger excessive memory allocation by generating a lot of queries that are routed to an overloaded DoH backend, causing queries to accumulate into a buffer that will not be released until the end of the connection.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

By publishing and querying a crafted zone an attacker can cause allocation of large entries in the negative and aggressive NSEC(3) caches.

An attacker can create a large number of concurrent DoQ or DoH3 connections, causing unlimited memory allocation in DNSdist and leading to a denial of service. DOQ and DoH3 are disabled by default.

XAPI open file limit DoS It is possible for an unauthenticated client on the network to cause XAPI to hit its file-descriptor limit. This causes XAPI to be unable to accept new requests for other (trusted) clients, and blocks XAPI from carrying out any tasks that require the opening of file descriptors.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

Dell PowerScale OneFS, versions 8.2.0.x-9.4.0.x contain allocation of Resources Without Limits or Throttling vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service and performance issue on that node.

OpenTelemetry.Exporter.Zipkin is the .NET Zipkin exporter for OpenTelemetry. In versions 1.15.2 and earlier, the Zipkin exporter remote endpoint cache accepts unbounded key growth derived from span attributes. In high-cardinality scenarios, a process using Zipkin export for client or producer spans could experience avoidable memory growth under sustained unique remote endpoint values, increasing process memory usage over time and degrading availability. This issue is fixed in version 1.15.3, which introduces a bounded, thread-safe LRU cache for remote endpoints with a fixed maximum size.

zae-limiter is a rate limiting library using the token bucket algorithm. Prior to version 0.10.1, all rate limit buckets for a single entity share the same DynamoDB partition key (`namespace/ENTITY#{id}`). A high-traffic entity can exceed DynamoDB's per-partition throughput limits (~1,000 WCU/sec), causing throttling that degrades service for that entity — and potentially co-located entities in the same partition. Version 0.10.1 fixes the issue.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

An Allocation of Resources Without Limits or Throttling vulnerability in Cesanta Frozen versions less than 1.7 allows an attacker to induce a crash of the component embedding the library by supplying a maliciously crafted JSON as input.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.get_byte_ranges parses the HTTP Range header without limiting the number of individual byte ranges. Although the existing fix for CVE-2024-26141 rejects ranges whose total byte coverage exceeds the file size, it does not restrict the count of ranges. An attacker can supply many small overlapping ranges such as 0-0,0-0,0-0,... to trigger disproportionate CPU, memory, I/O, and bandwidth consumption per request. This results in a denial of service condition in Rack file-serving paths that process multipart byte range responses. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

Due to an allocation of resources without limits, an uncontrolled resource consumption vulnerability exists in Silicon Labs Ember ZNet SDK prior to v7.4.0.0 (delivered as part of Silicon Labs Gecko SDK v4.4.0) which may enable attackers to trigger a bus fault and crash of the device, requiring a reboot in order to rejoin the network.

A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart. This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition.

An issue was discovered in Mattermost Server before 4.2.0, 4.1.1, and 4.0.5. It mishandles IP-based rate limiting.

Bitcoin Core through 27.2 allows transaction-relay jamming via an off-chain protocol attack, a related issue to CVE-2024-52913. For example, the outcome of an HTLC (Hashed Timelock Contract) can be changed because a flood of transaction traffic prevents propagation of certain Lightning channel transactions.

In Bitcoin Core before 0.21.0, an attacker could prevent a node from seeing a specific unconfirmed transaction, because transaction re-requests are mishandled.

Password Pusher, an open source application to communicate sensitive information over the web, comes with a configurable rate limiter. In versions prior to v1.49.0, the rate limiter could be bypassed by forging proxy headers allowing bad actors to send unlimited traffic to the site potentially causing a denial of service. In v1.49.0, a fix was implemented to only authorize proxies on local IPs which resolves this issue. As a workaround, one may add rules to one's proxy and/or firewall to not accept external proxy headers such as `X-Forwarded-*` from clients.

MediaWiki before 1.36.2 allows a denial of service (resource consumption because of lengthy query processing time). Visiting Special:Contributions can sometimes result in a long running SQL query because PoolCounter protection is mishandled.

A potential DoS vulnerability was discovered in GitLab CE/EE starting with version 13.7. Using a malformed TIFF images was possible to trigger memory exhaustion.

Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory).

Aten PE8108 2.4.232 is vulnerable to denial of service (DOS).

Budibase is an open-source low-code platform. Prior to version 3.23.25, a business logic vulnerability exists in Budibase’s password reset functionality due to the absence of rate limiting, CAPTCHA, or abuse prevention mechanisms on the “Forgot Password” endpoint. An unauthenticated attacker can repeatedly trigger password reset requests for the same email address, resulting in hundreds of password reset emails being sent in a short time window. This enables large-scale email flooding, user harassment, denial of service (DoS) against user inboxes, and potential financial and reputational impact for Budibase. This issue has been patched in version 3.23.25.

An allocation of resources without limits or throttling [CWE-770] vulnerability in FortiOS versions 7.6.0, versions 7.4.4 through 7.4.0, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow a remote unauthenticated attacker to prevent access to the GUI via specially crafted requests directed at specific endpoints.

A vulnerability in the web interface of the Güralp Fortimus Series, Minimus Series and Certimus Series allows an unauthenticated attacker with network access to send specially-crafted HTTP requests that can cause the web service process to deliberately restart. Although this mechanism limits the impact of the attack, it results in a brief denial-of-service condition during the restart.

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

An issue was discovered in OPC Foundation OPCFoundation/UA-.NETStandard through 1.5.374.78. A remote attacker can send requests with invalid credentials and cause the server performance to degrade gradually.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.6.4, 18.7 before 18.7.2, and 18.8 before 18.8.2 that could have allowed an unauthenticated user to create a denial of service condition by sending repeated malformed SSH authentication requests.

Crafted zones can lead to increased resource usage and crafted CNAME chains can lead to cache poisoning in Recursor.

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.15 and 2.12.6, a malicious client which can connect to the WebSockets port can cause unbounded memory use in the nats-server before authentication; this requires sending a corresponding amount of data. This is a milder variant of CVE-2026-27571. That earlier issue was a compression bomb, this vulnerability is not. Attacks against this new issue thus require significant client bandwidth. Versions 2.11.15 and 2.12.6 contain a fix. As a workaround, disable websockets if not required for project deployment.

In some circumstances, a stale value could have been used for a global variable in WASM JIT analysis. This resulted in incorrect compilation and a potentially exploitable crash in the content process. This vulnerability affects Firefox < 116, Firefox ESR < 102.14, and Firefox ESR < 115.1.

The direct_mail extension through 5.2.3 for TYPO3 allows Denial of Service via log entries.

Discourse is an open source discussion platform. Prior to version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches, in multiple controller actions, Discourse accepts limit params but does not impose any upper bound on the values being accepted. Without an upper bound, the software may allow arbitrary users to generate DB queries which may end up exhausting the resources on the server. The issue is patched in version 3.0.6 of the `stable` branch and version 3.1.0.beta7 of the `beta` and `tests-passed` branches. There are no known workarounds for this vulnerability.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

An unauthenticated remote attacker can exploit the behavior of the pathfinder TCP encapsulation service by establishing a high number of TCP connections to the pathfinder TCP encapsulation service. The impact is limited to blocking of valid IPsec VPN peers.

Rapid7 InsightVM Console versions below 6.6.260 suffer from a protection mechanism failure whereby an attacker with network access to the InsightVM Console can cause it to overload or crash by sending repeated invalid REST requests in a short timeframe, to the Console's port 443 causing the console to enter an exception handling logging loop, exhausting the CPU. There is no indication that an attacker can use this method to escalate privilege, acquire unauthorized access to data, or gain control of protected resources. This issue is fixed in version 6.6.261.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. In versions 3.13.2 and below, handling of chunked messages can result in excessive blocking CPU usage when receiving a large number of chunks. If an application makes use of the request.read() method in an endpoint, it may be possible for an attacker to cause the server to spend a moderate amount of blocking CPU time (e.g. 1 second) while processing the request. This could potentially lead to DoS as the server would be unable to handle other requests during that time. This issue is fixed in version 3.13.3.

Next.js is a React framework for building full-stack web applications. Starting in version 13.0.0 and prior to versions 13.5.8, 14.2.21, and 15.1.2, Next.js is vulnerable to a Denial of Service (DoS) attack that allows attackers to construct requests that leaves requests to Server Actions hanging until the hosting provider cancels the function execution. This vulnerability can also be used as a Denial of Wallet (DoW) attack when deployed in providers billing by response times. (Note: Next.js server is idle during that time and only keeps the connection open. CPU and memory footprint are low during that time.). Deployments without any protection against long running Server Action invocations are especially vulnerable. Hosting providers like Vercel or Netlify set a default maximum duration on function execution to reduce the risk of excessive billing. This is the same issue as if the incoming HTTP request has an invalid `Content-Length` header or never closes. If the host has no other mitigations to those then this vulnerability is novel. This vulnerability affects only Next.js deployments using Server Actions. The issue was resolved in Next.js 13.5.8, 14.2.21, and 15.1.2. We recommend that users upgrade to a safe version. There are no official workarounds.

A flaw was found in Open Virtual Network where the service monitor MAC does not properly rate limit. This issue could allow an attacker to cause a denial of service, including on deployments with CoPP enabled and properly configured.