A Denial-of-Service (DoS) vulnerability was discovered in Team Server in HelpSystems Cobalt Strike 4.2 and 4.3. It allows remote attackers to crash the C2 server thread and block beacons' communication with it.

Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The URL parser in src/hackney_url.erl converts every unrecognized URL scheme to a permanent BEAM atom via binary_to_atom/2. BEAM atoms are never garbage-collected and the atom table defaults to a hard limit of 1,048,576 entries. An attacker who can supply URLs with attacker-chosen scheme prefixes — directly as request targets, as configured webhook URLs, or via Location headers followed during redirects — can exhaust the atom table and crash the entire BEAM VM with system_limit. This issue affects hackney: from 2.0.0 before 4.0.1.

When reading a specially crafted 7Z archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames covering a large range of packet numbers (including packet numbers that had never been sent); see RFC 9000 Section 19.3. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. In extreme cases, the window might grow beyond the limit of the internal variable's type, leading to an overflow panic. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

Pion Interceptor is a framework for building RTP/RTCP communication software. Versions v0.1.36 through v0.1.38 contain a bug in a RTP packet factory that can be exploited to trigger a panic with Pion based SFU via crafted RTP packets, This only affect users that use pion/interceptor. Users should upgrade to v0.1.39 or later, which validates that: `padLen > 0 && padLen <= payloadLength` and return error on overflow, avoiding panic. If upgrading is not possible, apply the patch from the pull request manually or drop packets whose P-bit is set but whose padLen is zero or larger than the remaining payload.

Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability.

Redis is an open source, in-memory database that persists on disk. An unauthenticated connection can cause repeated IP protocol errors, leading to client starvation and, ultimately, a denial of service. This vulnerability is fixed in 8.0.3, 7.4.5, 7.2.10, and 6.2.19.

The TIFF decoder does not place a limit on the size of PackBits-compressed data. A maliciously-crafted image can exploit this to cause a small image (both in terms of pixel width/height and encoded size) to make the decoder decode large amounts of compressed data.

Tornado is a Python web framework and asynchronous networking library. When Tornado's ``multipart/form-data`` parser encounters certain errors, it logs a warning but continues trying to parse the remainder of the data. This allows remote attackers to generate an extremely high volume of logs, constituting a DoS attack. This DoS is compounded by the fact that the logging subsystem is synchronous. All versions of Tornado prior to 6.5.0 are affected. The vulnerable parser is enabled by default. Upgrade to Tornado version 6.50 to receive a patch. As a workaround, risk can be mitigated by blocking `Content-Type: multipart/form-data` in a proxy.

Russh is a Rust SSH client & server library. From version 0.34.0 to before version 0.61.1, when SSH compression is enabled, russh accepted compressed packets whose on-wire size passed the normal transport packet-length checks but whose decompressed size was much larger. This allowed a remote peer to send oversized post-decompression packets that should have been rejected. In current releases, this is a remote denial-of-service / resource-exhaustion issue in the post-decompression receive path. In older releases before 0.58.0, the same remote decompression path used CryptoVec, which appears to make the historical impact worse. This issue has been patched in version 0.61.1.

CoreDNS is a DNS server that chains plugins. In versions prior to 1.12.2, a Denial of Service (DoS) vulnerability exists in the CoreDNS DNS-over-QUIC (DoQ) server implementation. The server previously created a new goroutine for every incoming QUIC stream without imposing any limits on the number of concurrent streams or goroutines. A remote, unauthenticated attacker could open a large number of streams, leading to uncontrolled memory consumption and eventually causing an Out Of Memory (OOM) crash — especially in containerized or memory-constrained environments. The patch in version 1.12.2 introduces two key mitigation mechanisms: `max_streams`, which caps the number of concurrent QUIC streams per connection with a default value of `256`; and `worker_pool_size`, which Introduces a server-wide, bounded worker pool to process incoming streams with a default value of `1024`. This eliminates the 1:1 stream-to-goroutine model and ensures that CoreDNS remains resilient under high concurrency. Some workarounds are available for those who are unable to upgrade. Disable QUIC support by removing or commenting out the `quic://` block in the Corefile, use container runtime resource limits to detect and isolate excessive memory usage, and/or monitor QUIC connection patterns and alert on anomalies.

Amazon Ion is a Java implementation of the Ion data notation. Prior to version 1.10.5, a potential denial-of-service issue exists in `ion-java` for applications that use `ion-java` to deserialize Ion text encoded data, or deserialize Ion text or binary encoded data into the `IonValue` model and then invoke certain `IonValue` methods on that in-memory representation. An actor could craft Ion data that, when loaded by the affected application and/or processed using the `IonValue` model, results in a `StackOverflowError` originating from the `ion-java` library. The patch is included in `ion-java` 1.10.5. As a workaround, do not load data which originated from an untrusted source or that could have been tampered with.

A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function in the LDAP server does not enforce an upper bound on the number of controls per LDAP message. A remote, unauthenticated attacker can send a specially crafted LDAP request containing hundreds of thousands of minimal controls within the default maximum BER message size (2 MB), causing excessive CPU consumption and heap allocation on the server. Under concurrent exploitation, this leads to significant latency degradation, worker thread starvation, or out-of-memory termination, resulting in a denial of service.

Discourse is an open-source discussion platform. Prior to version 3.4.4 of the `stable` branch, version 3.5.0.beta5 of the `beta` branch, and version 3.5.0.beta6-dev of the `tests-passed` branch, sending a malicious URL in a PM to a bot user can cause a reduced the availability of a Discourse instance. This issue is patched in version 3.4.4 of the `stable` branch, version 3.5.0.beta5 of the `beta` branch, and version 3.5.0.beta6-dev of the `tests-passed` branch. No known workarounds are available.

Allocation of resources without limits or throttling vulnerability in Progress Software MOVEit Automation allows Excessive Allocation. This issue affects MOVEit Automation: before 2025.0.11, from 2025.1.0 before 2025.1.7.

A memory allocation with excessive size value vulnerability in the license verification function of FortiPortal before 6.0.6 may allow an attacker to perform a denial of service attack via specially crafted license blobs.

Rack is a modular Ruby web server interface. Prior to versions 2.2.14, 3.0.16, and 3.1.14, `Rack::QueryParser` parses query strings and `application/x-www-form-urlencoded` bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters. The vulnerability arises because `Rack::QueryParser` iterates over each `&`-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing. An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted. Versions 2.2.14, 3.0.16, and 3.1.14 fix the issue. Some other mitigations are available. One may use middleware to enforce a maximum query string size or parameter count, or employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies. Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

LengthPrefixedMessageReader in gRPC Swift 1.1.0 and earlier allocates buffers of arbitrary length, which allows remote attackers to cause uncontrolled resource consumption and deny service.

A vulnerability was found in Keycloak before 11.0.1 where DoS attack is possible by sending twenty requests simultaneously to the specified keycloak server, all with a Content-Length header value that exceeds the actual byte count of the request body.

A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.

Allocation of resources without limits or throttling vulnerability in Progress Software MOVEit Automation allows Flooding. This issue affects MOVEit Automation: before 2025.0.11, from 2025.1.0 before 2025.1.7.

When an iRule containing the HTTP::respond command is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

The SSH daemon on MikroTik routers through v6.44.3 could allow remote attackers to generate CPU activity, trigger refusal of new authorized connections, and cause a reboot via connect and write system calls, because of uncontrolled resource management.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Dell BSAFE SSL-J contains an allocation of resources without limits or throttling vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to a Denial of Service (DoS).

@fastify/accepts-serializer cached serializer-selection results keyed by the request Accept header without a size limit or eviction policy. A remote unauthenticated client could send many distinct but matching Accept header variants to make the cache grow unbounded, eventually exhausting the Node.js heap and crashing the process. Versions <= 6.0.3 are affected. Update to 6.0.4 or later, which bounds the cache via an LRU with a default size of 100 entries, configurable through the new cacheSize plugin option.

Boundary Community Edition and Boundary Enterprise (“Boundary”) workers are vulnerable to a denial-of-service condition during node enrollment TLS handshakes. An attacker with network access to the worker authentication listener may open a connection and delay or withhold the client certificate during the TLS handshake, causing worker connection handling to block. This may prevent legitimate worker connections from being accepted or routed. This vulnerability, CVE-2026-7776, is fixed in Boundary 0.21.3, 0.20.3, 0.19.5.

Improper memory allocation during counter check DLM handling can lead to denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper input validation in the API request parsing middleware.

Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.

A denial of service vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to cause service disruption by sending crafted requests with deeply nested JSON payloads to an unauthenticated API endpoint. The endpoint parsed user-controlled JSON request bodies without size or depth limits, causing excessive CPU and memory consumption. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.2, 3.19.6, 3.18.9, 3.17.15, and 3.16.18. This vulnerability was reported via the GitHub Bug Bounty program.

Mantis Bug Tracker (MantisBT) is an open source issue tracker. Versions 2.27.1 and below allow attackers to permanently corrupt issue activity logs by submitting extremely long notes (tested with 4,788,761 characters) due to a lack of server-side validation of note length. Once such a note is added, the activity stream UI fails to render; therefore, new notes cannot be displayed, effectively breaking all future collaboration on the issue. This issue is fixed in version 2.27.2.

Vault is vulnerable to a denial-of-service condition where an unauthenticated attacker can repeatedly initiate or cancel root token generation or rekey operations, occupying the single in-progress operation slot. This prevents legitimate operators from completing these workflows. This vulnerability, CVE-2026-5807, is fixed in Vault Community Edition 2.0.0 and Vault Enterprise 2.0.0.

In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected.

Redis is an open source, in-memory database that persists on disk. When parsing an incoming Redis Standard Protocol (RESP) request, Redis allocates memory according to user-specified values which determine the number of elements (in the multi-bulk header) and size of each element (in the bulk header). An attacker delivering specially crafted requests over multiple connections can cause the server to allocate significant amount of memory. Because the same parsing mechanism is used to handle authentication requests, this vulnerability can also be exploited by unauthenticated users. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways: Using network access control tools like firewalls, iptables, security groups, etc. or Enabling TLS and requiring users to authenticate using client side certificates.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-50 and 7.1.2-25, a missing check for maximum memory request in AcquireAlignedMemory could trigger an out-of-Memory condition. This issue has been patched in versions 6.9.13-50 and 7.1.2-25.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

A gzip decompression bomb vulnerability exists when Orthanc processes HTTP request with `Content-Encoding: gzip`. The server does not enforce limits on decompressed size and allocates memory based on attacker-controlled compression metadata. A specially crafted gzip payload can trigger excessive memory allocation and exhaust system memory.

Apache Fluss versions prior to 0.9.1 configure the Netty LengthFieldBasedFrameDecoder with Integer.MAX_VALUE as the maximum frame length, allowing unauthenticated remote attackers to exhaust JVM heap memory on TabletServer and CoordinatorServer by sending specially crafted frame headers, resulting in denial of service. This issue affects Apache Fluss (incubating): 0.8.0 and 0.9.0. Users are recommended to upgrade to version 0.9.1, which fixes the issue.

Russh is a Rust SSH client & server library. Prior to version 0.60.3, CryptoVec used unchecked capacity growth, unchecked length arithmetic, and unsafe allocation/locking paths. In current russh releases, local SSH agent peers could still feed attacker-controlled frame lengths into buffer growth before validation. In older russh releases before 0.58.0, remote SSH traffic also reached CryptoVec through transport and compression buffers. This issue has been patched in version 0.60.3.

Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR3-20260417.085727-30` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to exploit a vulnerability in Network to stall the netty event loop, rendering it inoperable. All consumers of the library should upgrade to at least version `1.0.0.CR3-20260417.085727-30`. There are no known workarounds beyond updating the library.

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.43.4, negative chunk-size in chunked Transfer-Encoding causes unbounded memory allocation and process crash. The ChunkedDecoder::read_payload function in cpp-httplib (httplib.h) parses the chunk-size field of HTTP chunked transfer encoding using std::strtoul(). Per the C standard (§7.22.1.4), strtoul silently accepts a leading minus sign, performing unsigned wrap-around: strtoul("-2", …, 16) returns ULONG_MAX − 1 (0xFFFFFFFFFFFFFFFE). The library's only guard (line 12833) rejects ULONG_MAX (the result of "-1"), but any other negative value such as "-2" passes validation. The resulting near-maximum value is stored in chunk_remaining and controls how many bytes the server's read loop consumes from the network. This vulnerability is fixed in 0.43.4.

basic-ftp is an FTP client for Node.js. Prior to 5.3.1, basic-ftp is vulnerable to client-side denial of service when parsing FTP control-channel multiline responses. A malicious or compromised FTP server can send an unterminated multiline response during the initial FTP banner phase, before authentication. The client keeps appending attacker-controlled data into FtpContext._partialResponse and repeatedly reparses the accumulated buffer without enforcing a maximum control response size. As a result, an application using basic-ftp can remain stuck in connect() while memory and CPU usage grow under attacker-controlled input. This can lead to process-level denial of service, container OOM kills, worker restarts, queue backlog, or service degradation in applications that automatically connect to FTP endpoints. This vulnerability is fixed in 5.3.1.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by XML parsing resource amplification from unauthenticated connections.

Next.js is a React framework for building full-stack web applications. From to before 15.5.16 and 16.2.5, applications using Partial Prerendering through the Cache Components feature can be vulnerable to connection exhaustion through crafted POST requests to a server action. In affected configurations, a malicious request can trigger a request-body handling deadlock that leaves connections open for an extended period, consuming file descriptors and server capacity until legitimate users are denied service. This vulnerability is fixed in 15.5.16 and 16.2.5.

Wasmtime is a runtime for WebAssembly. From 30.0.0 to 36.0.8, 43.0.2, and 44.0.1, Wasmtime's allocation logic for a WebAssembly table contained checked arithmetic which panicked on overflow. This overflow is possible to trigger, and thus panic, when a table with an extremely large size is allocated. This is possible with the WebAssembly memory64 proposal where tables can have sizes in the 64-bit range as opposed to the previous 32-bit range which would not overflow. The panic happens when attempting to create a very large table, such as when instantiating a WebAssembly module or component. This vulnerability is fixed in 36.0.8, 43.0.2, and 44.0.1.

OpenClaw versions 2026.4.9 before 2026.4.10 contain a denial of service vulnerability in the voice-call realtime WebSocket path that accepts oversized frames without proper validation. Remote attackers can send oversized WebSocket frames to cause service unavailability for deployments exposing the voice-call realtime WebSocket path.

n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117. Older, unsupported versions may also be affected. Users are recommended to upgrade to version [FIXED_VERSION], which fixes the issue.

An issue was discovered in glFTPd 2.11a that allows remote attackers to cause a denial of service via exceeding the connection limit.