Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

DELL EMC Avamar Server, versions 19.1, 19.2, 19.3, contain an OS Command Injection Vulnerability in Fitness Analyzer. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS with high privileges. This vulnerability is considered critical as it can be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

ssh2 is client and server modules written in pure JavaScript for node.js. In ssh2 before version 1.4.0 there is a command injection vulnerability. The issue only exists on Windows. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This is fixed in version 1.4.0.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.

Storage Concentrator (SC & SCVM) contains a command injection vulnerability in the ms_service.pl service, which listens on TCP port 9000 by default and accepts custom network packets to perform device actions. An unauthenticated remote attacker can send a specially crafted packet containing a malicious payload that is processed without adequate sanitization, resulting in arbitrary command execution with root-level privileges.

A shellcode injection in the mercurial handler of the obs tar_scm source service before version 0.12.4 could be used by attackers able to provide a _service file to execute code as the source service or the local user checking out the malicious services

An improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet allows attacker to execute unauthorized code or commands via via crafted API requests.

Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21.

MariaDB server is a community developed fork of MySQL server. Versions 10.6.1 through 10.6.26, 10.11.1 through 10.11.17, 11.4.1 through 11.4.11, 11.8.1 through 11.8.7, and 12.3.1 with `wsrep_notify_cmd` enabled would execute shell commands embedded in the name of the joiner node. This is fixed in 10.6.27, 10.11.18, 11.4.12, 11.8.8, and 12.3.2. As a workaround, anyone who cannot upgrade now should disable `wsrep_notify_cmd`.

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is started in REST API server mode (dalfox server), the server binds to 0.0.0.0:6664 by default and requires no API key unless the operator explicitly passes --api-key. Because model.Options — including FoundAction and FoundActionShell — is deserialized directly from attacker-supplied JSON in POST /scan, and because dalfox.Initialize explicitly propagates those two fields into the final scan options without stripping them, any unauthenticated caller who can reach the server port can supply an arbitrary shell command that the dalfox process will execute on the host whenever a scan finding is triggered. This vulnerability is fixed in 2.13.0.

Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

PDF Export Module used in DHTMLX's products Gantt and Scheduler is vulnerable to Remote Code Execution due to lack of "data" parameter sanitization. An unauthenticated attacker can inject the malicious JavaScript code to the parameter whose value is processed by Node.js and subsequently executed. This can lead to server compromise. This issue was fixed in PDF Export Module version 0.7.6.

OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to version 2.0.3, a remote code execution (RCE) vulnerability was identified in the OpenLearnX code execution environment, allowing sandbox escape and arbitrary command execution. This issue has been patched in version 2.0.3.

PraisonAI is a multi-agent teams system. Prior to version 4.5.97, SubprocessSandbox in all modes (BASIC, STRICT, NETWORK_ISOLATED) calls subprocess.run() with shell=True and relies solely on string-pattern matching to block dangerous commands. The blocklist does not include sh or bash as standalone executables, allowing trivial sandbox escape in STRICT mode via sh -c '<command>'. This issue has been patched in version 4.5.97.

CtrlPanel is open-source billing software for hosting providers. In versions 1.1.1 and prior, the web-based installer (public/installer/index.php) is vulnerable to unauthenticated Remote Code Execution (RCE) because it performs the install.lock check only after including and executing form handler files, leaving installer endpoints reachable on already-installed instances. The handlers also pass unsanitized user input directly into shell commands, allowing an attacker to submit crafted requests that execute arbitrary commands on the server. The vulnerability stems from two combined weaknesses: (1) premature form handler execution before the lock file gate, and (2) unsafe use of user input in shell command construction. This issue is reported to be actively exploited in the wild. The issue has been fixed in version 1.2.0.

The command auto-approval module in CodeRider-Kilo contains an OS Command Injection vulnerability, rendering its whitelist security mechanism ineffective. The vulnerability stems from the incorrect use of an incompatible command parser (the Unix-based shell-quote library) to analyze commands on the Windows platform, coupled with a failure to correctly handle Windows CMD-specific escape sequences (^). Attackers can exploit this discrepancy between the parsing logic and the execution environment by constructing payloads such as git log ^" & malicious_command ^". The CodeRider-Kilo parser is deceived by the escape characters, misinterpreting the malicious command connector (&) as being within a protected string argument and thus auto-approving the command. However, the underlying Windows CMD interpreter ignores the escaped quotes, parsing and executing the subsequent malicious command directly. This allows attackers to achieve arbitrary Remote Code Execution (RCE) after bypassing what appears to be a legitimate Git whitelist check.

NPM package gitlabhook version 0.0.17 is vulnerable to a Command Injection vulnerability. Arbitrary commands can be injected through the repository name.

WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, a critical Remote Code Execution (RCE) vulnerability exists in the WeGIA application's database restoration functionality. An attacker with administrative access (which can be obtained via the previously reported Authentication Bypass) can execute arbitrary OS commands on the server by uploading a backup file with a specifically crafted filename. Version 3.6.5 fixes the issue.

An OS command injection vulnerability exists in the httpd iperfrun.cgi functionality of FreshTomato 2023.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

A flaw was found in Samba, in the front-end WINS hook handling: NetBIOS names from registration packets are passed to a shell without proper validation or escaping. Unsanitized NetBIOS name data from WINS registration packets are inserted into a shell command and executed by the Samba Active Directory Domain Controller’s wins hook, allowing an unauthenticated network attacker to achieve remote command execution as the Samba process.

getresetstatus in dns/views.py and ftp/views.py in CyberPanel (aka Cyber Panel) before 1c0c6cb allows remote attackers to bypass authentication and execute arbitrary commands via /dns/getresetstatus or /ftp/getresetstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

A vulnerability has been identified in OZW672 (All versions < V8.0), OZW772 (All versions < V8.0). The web service in affected devices does not sanitize the input parameters required for the `exportDiagramPage` endpoint. This could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

vm2 is an open source vm/sandbox for Node.js. In vm2 for versions up to and including 3.9.19, Node.js custom inspect function allows attackers to escape the sandbox and run arbitrary code. This may result in Remote Code Execution, assuming the attacker has arbitrary code execution primitive inside the context of vm2 sandbox. There are no patches and no known workarounds. Users are advised to find an alternative software.

Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability specifically focuses on the unsafe use of the `WL_SSID` and `WL_SSID_HEX` configuration values in the function at offset `0x1c7d28` of firmware 6.9Z.

Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability specifically focuses on the unsafe use of the `WL_WPAPSK` configuration value in the function located at offset `0x1c7d28` of firmware 6.9Z.

WWBN AVideo is an open source video platform. In versions up to and including 26.0, multiple vulnerabilities in AVideo's CloneSite plugin chain together to allow a completely unauthenticated attacker to achieve remote code execution. The `clones.json.php` endpoint exposes clone secret keys without authentication, which can be used to trigger a full database dump via `cloneServer.json.php`. The dump contains admin password hashes stored as MD5, which are trivially crackable. With admin access, the attacker exploits an OS command injection in the rsync command construction in `cloneClient.json.php` to execute arbitrary system commands. Commit c85d076375fab095a14170df7ddb27058134d38c contains a patch.

CyberPanel (aka Cyber Panel) before 2.3.5 allows Command Injection via completePath in the ProcessUtilities.outputExecutioner() sink. There is /filemanager/upload (aka File Manager upload) unauthenticated remote code execution via shell metacharacters.

An OS Command Injection vulnerability exists within myPRO Manager. A parameter within a command can be exploited by an unauthenticated remote attacker to inject arbitrary operating system commands.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `WL_DefaultKeyID` in the function located at offset `0x1c7d28` of firmware 6.9Z, and even more specifically on the command execution occuring at offset `0x1c7fac`.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `WL_Key` and `WL_DefaultKeyID` configuration values in the function located at offset `0x1c7d28` of firmware 6.9Z , and even more specifically on the command execution occuring at offset `0x1c7f6c`.

RaspberryMatic is a free and open-source operating system for running a cloud-free smart-home using the homematicIP / HomeMatic hardware line of IoT devices. A Remote Code Execution (RCE) vulnerability in the file upload facility of the WebUI interface of RaspberryMatic exists. Missing input validation/sanitization in the file upload mechanism allows remote, unauthenticated attackers with network access to the WebUI interface to achieve arbitrary operating system command execution via shell metacharacters in the HTTP query string. Injected commands are executed as root, thus leading to a full compromise of the underlying system and all its components. Versions after `2.31.25.20180428` and prior to `3.63.8.20220330` are affected. Users are advised to update to version `3.63.8.20220330` or newer. There are currently no known workarounds to mitigate the security impact and users are advised to update to the latest version available.

Asciidoctor-include-ext is Asciidoctor’s standard include processor reimplemented as an extension. Versions prior to 0.4.0, when used to render user-supplied input in AsciiDoc markup, may allow an attacker to execute arbitrary system commands on the host operating system. This attack is possible even when `allow-uri-read` is disabled! The problem has been patched in the referenced commits.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 6.1.1.0 are subject to a remote code execution vulnerability. System commands can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Attackers need not be authenticated to exploit this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An OS command injection vulnerability in lib/NSSDropoff.php in ZendTo 5.24-3 through 6.x before 6.10-7 allows unauthenticated remote attackers to execute arbitrary commands via shell metacharacters in the tmp_name parameter when dropping off a file via a POST /dropoff request.

An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A remote command execution vulnerability exists in gogs/gogs versions <=0.12.7 when deployed on a Windows server. The vulnerability arises due to improper validation of the `tree_path` parameter during file uploads. An attacker can set `tree_path=.git.` to upload a file into the .git directory, allowing them to write or rewrite the `.git/config` file. If the `core.sshCommand` is set, this can lead to remote command execution.

An OS command injection vulnerability exists due to improper input validation. The application accepts a parameter directly from user input without verifying it is a valid IP address or filtering potentially malicious characters. This could allow an unauthenticated attacker to inject arbitrary commands.

A parameter within a command does not properly validate input within myPRO Manager which could be exploited by an unauthenticated remote attacker to inject arbitrary operating system commands.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

The postjournal service in Zimbra Collaboration (ZCS) before 8.8.15 Patch 46, 9 before 9.0.0 Patch 41, 10 before 10.0.9, and 10.1 before 10.1.1 sometimes allows unauthenticated users to execute commands.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet allows attacker to execute unauthorized code or commands via crafted API requests.

An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated user to achieve root-level remote code execution

OS Command Injection in GitHub repository sbs20/scanservjs prior to v2.27.0.