4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

GE Infinia/Infinia with Hawkeye 4 medical imaging systems all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi.

An authentication vulnerability in HPE BSM Platform Application Performance Management System Health product versions 9.26, 9.30 and 9.40, allows remote users to bypass authentication.

Xiaongmai AHB7008T-MH-V2, AHB7804R-ELS, AHB7804R-MH-V2, AHB7808R-MS-V2, AHB7808R-MS, AHB7808T-MS-V2, AHB7804R-LMS, HI3518_50H10L_S39 V4.02.R11.7601.Nat.Onvif.20170420, V4.02.R11.Nat.Onvif.20160422, V4.02.R11.7601.Nat.Onvif.20170424, V4.02.R11.Nat.Onvif.20170327, V4.02.R11.Nat.Onvif.20161205, V4.02.R11.Nat.20170301, V4.02.R12.Nat.OnvifS.20170727 is affected by a backdoor in the macGuarder and dvrHelper binaries of DVR/NVR/IP camera firmware due to static root account credentials in the system.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

acFTP 1.4 does not properly handle when an invalid password is provided by the user during authentication, which allows remote attackers to hide or misrepresent certain activity from log files and possibly gain privileges.

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors.

A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

HGiga MailSherlock contains weak authentication flaw that attackers grant privilege remotely with default password generation mechanism.

These Sinapsi devices do not check if users that visit pages within the device have properly authenticated. By directly visiting the pages within the device, attackers can gain unauthorized access with administrative privileges.

An issue was discovered in Zoho ManageEngine Exchange Reporter Plus before build number 5510, AD360 before build number 4228, ADSelfService Plus before build number 5817, DataSecurity Plus before build number 6033, RecoverManager Plus before build number 6017, EventLog Analyzer before build number 12136, ADAudit Plus before build number 6052, O365 Manager Plus before build number 4334, Cloud Security Plus before build number 4110, ADManager Plus before build number 7055, and Log360 before build number 5166. The remotely accessible Java servlet com.manageengine.ads.fw.servlet.UpdateProductDetails is prone to an authentication bypass. System integration properties can be modified and lead to full ManageEngine suite compromise.

freeFTPd.exe in freeFTPd through 1.0.11 allows remote attackers to bypass authentication via a crafted SFTP session, as demonstrated by an OpenSSH client with modified versions of ssh.c and sshconnect2.c.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

McAfee SmartFilter Administration, and SmartFilter Administration Bess Edition, before 4.2.1.01 does not require authentication for access to the JBoss Remote Method Invocation (RMI) interface, which allows remote attackers to execute arbitrary code via a crafted .war file.

The web interface on (1) Foscam and (2) Wansview IP cameras allows remote attackers to bypass authentication, and perform administrative functions or read the admin password, via a direct request to an unspecified URL.

Condor before 7.8.2 allows remote attackers to bypass host-based authentication and execute actions such as ALLOW_ADMINISTRATOR or ALLOW_WRITE by connecting from a system with a spoofed reverse DNS hostname.

The web interface on the SMC SMC8024L2 switch allows remote attackers to bypass authentication and obtain administrative access via a direct request to a .html file under (1) status/, (2) system/, (3) ports/, (4) trunks/, (5) vlans/, (6) qos/, (7) rstp/, (8) dot1x/, (9) security/, (10) igmps/, or (11) snmp/.

The web server in the ECOM Ethernet module in Koyo H0-ECOM, H0-ECOM100, H2-ECOM, H2-ECOM-F, H2-ECOM100, H4-ECOM, H4-ECOM-F, and H4-ECOM100 does not require authentication, which allows remote attackers to perform unspecified functions via unknown vectors.

The web server on the Siemens Scalance S Security Module firewall S602 V2, S612 V2, and S613 V2 with firmware before 2.3.0.3 does not limit the rate of authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack on the administrative password.

GbScriptAddUp.asp in Advantech/BroadWin WebAccess before 7.0 does not properly perform authentication, which allows remote attackers to execute arbitrary code via unspecified vectors.

The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.

The TELNET daemon in Siemens WinCC flexible 2004, 2005, 2007, and 2008; WinCC V11 (aka TIA portal); the TP, OP, MP, Comfort Panels, and Mobile Panels SIMATIC HMI panels; WinCC V11 Runtime Advanced; and WinCC flexible Runtime does not perform authentication, which makes it easier for remote attackers to obtain access via a TCP session.

CEServer.exe in the CEServer component in the Remote Agent module in InduSoft Web Studio 6.1 and 7.0 does not require authentication, which allows remote attackers to execute arbitrary code via vectors related to creation of a file, loading a DLL, and process control.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The authentication function contains undocumented code that provides the ability to authenticate as root without knowing the actual root password. An adversary with the private key can remotely authenticate to the management interface as root.

The host-services component in Symantec pcAnywhere 12.5.x through 12.5.3, and IT Management Suite pcAnywhere Solution 7.0 (aka 12.5.x) and 7.1 (aka 12.6.x), does not properly filter login and authentication data, which allows remote attackers to execute arbitrary code via a crafted session on TCP port 5631.

OneOrZero Action & Information Management System (AIMS) 2.7.0 allows remote attackers to bypass authentication and obtain administrator privileges via a crafted oozimsrememberme cookie.

IBM WebSphere Commerce 6.x through 6.0.0.11 and 7.x through 7.0.0.3 does not properly implement Activity Token authentication for Web Services, which has unspecified impact and attack vectors.

TCPUploadServer.exe in Progea Movicon 11.2 before Build 1084 does not require authentication for critical functions, which allows remote attackers to obtain sensitive information, delete files, execute arbitrary programs, or cause a denial of service (crash) via a crafted packet to TCP port 10651.

The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.

Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064.

An issue was discovered in MK-AUTH 19.01. There is authentication bypass in the web login functionality because guessable credentials to admin/executar_login.php result in admin access.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

The web-based administration interface on the Camtron CMNC-200 Full HD IP Camera and TecVoz CMNC-200 Megapixel IP Camera with firmware 1.102A-008 allows remote attackers to bypass authentication via a // (slash slash) at the beginning of a URI, as demonstrated by the //system.html URI.

An authentication bypass vulnerability in Juniper Networks Junos Space Network Management Platform may allow a remote unauthenticated network based attacker to login as any privileged user. This issue only affects Junos Space Network Management Platform 17.1R1 without Patch v1 and 16.1 releases prior to 16.1R3. This issue was found by an external security researcher.