The bgp_nlri_parse_vpnv4 function in bgp_mplsvpn.c in the VPNv4 NLRI parser in bgpd in Quagga before 1.0.20160309, when a certain VPNv4 configuration is used, relies on a Labeled-VPN SAFI routes-data length field during a data copy, which allows remote attackers to execute arbitrary code or cause a denial of service (stack-based buffer overflow) via a crafted packet.
It was discovered that the zebra daemon in Quagga before 1.0.20161017 suffered from a stack-based buffer overflow when processing IPv6 Neighbor Discovery messages. The root cause was relying on BUFSIZ to be compatible with a message size; however, BUFSIZ is system-dependent.
The Quagga BGP daemon (bgpd) prior to version 1.2.3 does not properly bounds check the data sent with a NOTIFY to a peer, if an attribute length is invalid. Arbitrary data from the bgpd process may be sent over the network to a peer and/or bgpd may crash.
All versions of Quagga, 0.93 through 1.1.0, are vulnerable to an unbounded memory allocation in the telnet 'vty' CLI, leading to a Denial-of-Service of Quagga daemons, or even the entire host. When Quagga daemons are configured with their telnet CLI enabled, anyone who can connect to the TCP ports can trigger this vulnerability, prior to authentication. Most distributions restrict the Quagga telnet interface to local access only by default. The Quagga telnet interface 'vty' input buffer grows automatically, without bound, so long as a newline is not entered. This allows an attacker to cause the Quagga daemon to allocate unbounded memory by sending very long strings without a newline. Eventually the daemon is terminated by the system, or the system itself runs out of memory. This is fixed in Quagga 1.1.1 and Free Range Routing (FRR) Protocol Suite 2017-01-10.
Stack-based buffer overflow in the new_msg_lsa_change_notify function in the OSPFD API (ospf_api.c) in Quagga before 0.99.22.2, when --enable-opaque-lsa and the -a command line option are used, allows remote attackers to cause a denial of service (crash) via a large LSA.
The BGP implementation in bgpd in Quagga before 0.99.20.1 does not properly use message buffers for OPEN messages, which allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a message associated with a malformed Four-octet AS Number Capability (aka AS4 capability).
Buffer overflow in the OSPFv2 implementation in ospfd in Quagga before 0.99.20.1 allows remote attackers to cause a denial of service (daemon crash) via a Link State Update (aka LS Update) packet containing a network-LSA link-state advertisement for which the data-structure length is smaller than the value in the Length header field.
Buffer overflow in the ospf_ls_upd_list_lsa function in ospf_packet.c in the OSPFv2 implementation in ospfd in Quagga before 0.99.20.1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a Link State Update (aka LS Update) packet that is smaller than the length specified in its header.
Heap-based buffer overflow in the ecommunity_ecom2str function in bgp_ecommunity.c in bgpd in Quagga before 0.99.19 allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code by sending a crafted BGP UPDATE message over IPv4.
The OSPFv3 implementation in ospf6d in Quagga before 0.99.19 allows remote attackers to cause a denial of service (out-of-bounds memory access and daemon crash) via a Link State Update message with an invalid IPv6 prefix length.
The affected product’s code base doesn’t properly control arguments for specific functions, which could lead to a stack overflow.
Geo++ GNCASTER 1.4.0.7 and earlier allows remote authenticated users to cause a denial of service (application crash) and possibly execute arbitrary code via a long NMEA data sentence.
Heap-based buffer overflow in IBM DB2 9.1 before FP9, 9.5 before FP6, and 9.7 before FP2 allows remote authenticated users to have an unspecified impact via a SELECT statement that has a long column name generated with the REPEAT function.
A flaw was found in samba versions 4.0.0 to 4.5.2. The Samba routine ndr_pull_dnsp_name contains an integer wrap problem, leading to an attacker-controlled memory overwrite. ndr_pull_dnsp_name parses data from the Samba Active Directory ldb database. Any user who can write to the dnsRecord attribute over LDAP can trigger this memory corruption. By default, all authenticated LDAP users can write to the dnsRecord attribute on new DNS objects. This makes the defect a remote privilege escalation.
A flaw has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. The impacted element is the function urlFilterManageRule of the file /goform/urlFilterManageRule. Executing manipulation of the argument urlFilterRuleName/scheduleUrl/addURLFilter can lead to stack-based buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.
Buffer overflow in programs/pluto/xauth.c in the client in Openswan 2.6.25 through 2.6.28 might allow remote authenticated gateways to execute arbitrary code or cause a denial of service via long (1) cisco_dns_info or (2) cisco_domain_info data in a packet.
Dameng DM Database Server allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via unspecified vectors related to the SP_DEL_BAK_EXPIRED procedure in wdm_dll.dll, which triggers memory corruption.
Stack-based buffer overflow in NWFTPD.nlm before 5.10.01 in the FTP server in Novell NetWare 5.1 through 6.5 SP8 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a long (1) MKD, (2) RMD, (3) RNFR, or (4) DELE command.
A memory corruption issue was addressed with improved validation. This issue affected versions prior to iOS 12, macOS Mojave 10.14, tvOS 12, watchOS 5.
An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. A specially crafted HTTP request can cause a buffer overflow, resulting in remote code execution on the device. An attacker can send an authenticated HTTP request to trigger this vulnerability.
A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical has been found in emqx neuron up to 2.10.0. Affected is the function handle_add_plugin in the library cmd.library of the file plugins/restful/plugin_handle.c. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue.
Buffer overflow in apply.cgi on TRENDnet TEW-632BRP 1.010B32 and TEW-673GRU devices allows attackers to hijack the control flow to any attacker-specified location by crafting a POST request payload (with authentication).
Multiple buffer overflows in the DBMail driver in the Password plugin in Roundcube before 1.1.0 allow remote attackers to have unspecified impact via the (1) password or (2) username.
Multiple stack-based buffer overflows in the File Transfer feature in rfbserver.c in LibVNCServer 0.9.9 and earlier allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a (1) long file or (2) directory name or the (3) FileTime attribute in a rfbFileTransferOffer message.
Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the ABAP VM, aka SAP Note 2059734.
Buffer overflow in the SAP NetWeaver Dispatcher in SAP Kernel 7.00 32-bit and 7.40 64-bit allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, related to the Spool System, aka SAP Note 2061271.
The RandR extension in XFree86 4.2.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcRRQueryVersion, (2) SProcRRGetScreenInfo, (3) SProcRRSelectInput, or (4) SProcRRConfigureOutputProperty function.
The SProcXFixesSelectSelectionInput function in the XFixes extension in X.Org X Window System (aka X11 or X) X11R6.8.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length value.
X.Org Server (aka xserver and xorg-server) 1.15.0 through 1.16.x before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) sproc_dri3_query_version, (2) sproc_dri3_open, (3) sproc_dri3_pixmap_from_buffer, (4) sproc_dri3_buffer_from_pixmap, (5) sproc_dri3_fence_from_fd, (6) sproc_dri3_fd_from_fence, (7) proc_present_query_capabilities, (8) sproc_present_query_version, (9) sproc_present_pixmap, (10) sproc_present_notify_msc, (11) sproc_present_select_input, or (12) sproc_present_query_capabilities function in the (a) DRI3 or (b) Present extension.
The Render extension in XFree86 4.0.1, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) ProcRenderQueryVersion, (2) SProcRenderQueryVersion, (3) SProcRenderQueryPictFormats, (4) SProcRenderQueryPictIndexValues, (5) SProcRenderCreatePicture, (6) SProcRenderChangePicture, (7) SProcRenderSetPictureClipRectangles, (8) SProcRenderFreePicture, (9) SProcRenderComposite, (10) SProcRenderScale, (11) SProcRenderCreateGlyphSet, (12) SProcRenderReferenceGlyphSet, (13) SProcRenderFreeGlyphSet, (14) SProcRenderFreeGlyphs, or (15) SProcRenderCompositeGlyphs function.
The DBE extension in X.Org X Window System (aka X11 or X) X11R6.1 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) ProcDbeSwapBuffers or (2) SProcDbeSwapBuffers function.
IObit Advanced SystemCare, which includes Monitor_win10_x64.sys or Monitor_win7_x64.sys, 1.2.0.5 (and possibly earlier versions) allows a user to send an IOCTL (0x9C402088) with a buffer containing user defined content. The driver's subroutine will execute a wrmsr instruction with the user's buffer for input.
The SProcXCMiscGetXIDList function in the XC-MISC extension in X.Org X Window System (aka X11 or X) X11R6.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value.
The XInput extension in X.Org X Window System (aka X11 or X) X11R4 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcXChangeDeviceControl, (2) ProcXChangeDeviceControl, (3) ProcXChangeFeedbackControl, (4) ProcXSendExtensionEvent, (5) SProcXIAllowEvents, (6) SProcXIChangeCursor, (7) ProcXIChangeHierarchy, (8) SProcXIGetClientPointer, (9) SProcXIGrabDevice, (10) SProcXIUngrabDevice, (11) ProcXIUngrabDevice, (12) SProcXIPassiveGrabDevice, (13) ProcXIPassiveGrabDevice, (14) SProcXIPassiveUngrabDevice, (15) ProcXIPassiveUngrabDevice, (16) SProcXListDeviceProperties, (17) SProcXDeleteDeviceProperty, (18) SProcXIListProperties, (19) SProcXIDeleteProperty, (20) SProcXIGetProperty, (21) SProcXIQueryDevice, (22) SProcXIQueryPointer, (23) SProcXISelectEvents, (24) SProcXISetClientPointer, (25) SProcXISetFocus, (26) SProcXIGetFocus, or (27) SProcXIWarpPointer function.
The XVideo extension in XFree86 4.0.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcXvQueryExtension, (2) SProcXvQueryAdaptors, (3) SProcXvQueryEncodings, (4) SProcXvGrabPort, (5) SProcXvUngrabPort, (6) SProcXvPutVideo, (7) SProcXvPutStill, (8) SProcXvGetVideo, (9) SProcXvGetStill, (10) SProcXvPutImage, (11) SProcXvShmPutImage, (12) SProcXvSelectVideoNotify, (13) SProcXvSelectPortNotify, (14) SProcXvStopVideo, (15) SProcXvSetPortAttribute, (16) SProcXvGetPortAttribute, (17) SProcXvQueryBestSize, (18) SProcXvQueryPortAttributes, (19) SProcXvQueryImageAttributes, or (20) SProcXvListImageFormats function.
The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function.
An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.
A heap-buffer overflow was found in the way samba clients processed extra long filename in a directory listing. A malicious samba server could use this flaw to cause arbitrary code execution on a samba client. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.
A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.
Buffer overflow in disp+work.exe 7000.52.12.34966 and 7200.117.19.50294 in the Dispatcher in SAP NetWeaver 7.00 and 7.20 allows remote authenticated users to cause a denial of service or execute arbitrary code via unspecified vectors.
Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via netWizard.cgi date parameter, time parameter, and offset parameter.
KadNode version version 2.2.0 contains a Buffer Overflow vulnerability in Arguments when starting up the binary that can result in Control of program execution flow, leading to remote code execution.
Buffer overflow in Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary code via submit-url parameter.
Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via tools_system.cgi date parameter, time parameter, and offset parameter.
Buffer overflow in Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary code via HTTP request and response.
Multiple buffer overflows in IBM Rational ClearCase 7.x before 7.1.2.13, 8.0.0.x before 8.0.0.10, and 8.0.1.x before 8.0.1.3 allow remote authenticated users to obtain privileged access via unspecified vectors.
Multiple buffer overflows in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to have unspecified impact and attack vectors, a different vulnerability than CVE-2014-0063.
Multiple stack-based buffer overflows in Icinga before 1.8.5, 1.9 before 1.9.4, and 1.10 before 1.10.2 allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long string to the (1) display_nav_table, (2) page_limit_selector, (3) print_export_link, or (4) page_num_selector function in cgi/cgiutils.c; (5) status_page_num_selector function in cgi/status.c; or (6) display_command_expansion function in cgi/config.c. NOTE: this can be exploited without authentication by leveraging CVE-2013-7107.
A stack buffer overflow vulnerability has been discovered in Microsoft Skype 7.2, 7.35, and 7.36 before 7.37, involving MSFTEDIT.DLL mishandling of remote RDP clipboard content within the message box.